Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Miyahara and M. Y. Lin, “”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 481-484.
[n] Y. Kojima, “Beam Test of a Three-Cell Structure in the Tristan Accumulation Ring”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-15, pp. XX-XX.
[n] A. A. Wilson, T. M. Cobb, and U. K. Pedersen, “Graduate Software Engineer Development Program at Diamond Light Source”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 96. doi:10.18429/JACoW-ICALEPCS2019-MOCPR01
[n] R. J. Burleigh, D. J. Clark, and L. R. Glasgow, “Heavy-Ion Booster Cyclotron Design Studies at Berkeley”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper I-06, pp. 604-608.
[n] K. Hanke et al., “Phase Rotation, Cooling and Acceleration of Muon Beams: A Comparison of Different Approaches”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THC17, pp. 893-895.
[n] F. F. Cilyo, F. E. Mills, and Y. Miyahara, “Active Filter for High Current dc Magnets”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3014-3017.
[n] M. Alves and F. de Sá, “Slow longitudinal mode 1 instability in electron storage rings with harmonic cavities”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 782-785. doi:10.18429/JACoW-IPAC2024-MOPS32
[n] V. Blackmore, “Recent Results from the Study of Emittance Evolution in MICE”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1699-1701. doi:10.18429/JACoW-IPAC2018-TUPML067
[n] F. Senee, B. Pottin, G. Adroit, R. Gobin, O. Tuske, and A. Olivier, “Beam Species Fraction Measurement using Doppler Shift Method with FUJIKURA Fiberscope for IFMIF-EVEDA Injector”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD46, pp. 407-409.
[n] M. Sekiguchi et al., “A Formulation of Spiral Inflector Design and Its Application to SF Cyclotron”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper IXC-02, pp. 450-453.
[n] M. Fathizadeh, “Analysis and Design of a High-Current, High-Voltage Accurate Power Supply for the APS Storage Ring”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1288-1291.
[n] K. Sato et al., “Status of the INS 176 cm Sector Focusing Cyclotron”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper B-07, pp. 1984-1987.
[n] P. D. Smith, “CCT: A Code to Automate the Design of Coupled Cavities”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THB14, pp. 827-829.
[n] Z. Korm?íny, T. Lakatos, and A. Valek, “A Microcomputer-Based Versatile Profile Monitoring System”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F5-10, pp. 309-312.
[n] F. Sakamoto et al., “Beam Generation and Acceleration Experiments of X-Band Linac and Monochromatic keV X-Ray Source of the University of Tokyo”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN032, pp. 2784-2786.
[n] T. Garvey, M. Omeich, M. Jablonka, J. M. Joly, and H. Long, “Simulations and Measurements of the TTF Phase-1 Injector Gun”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPA14, pp. 935-937.
[n] F. Amman, “Beam-Beam Limits”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 858-862.
[n] O. Belikov, A. Chernyakin, V. Kozak, and A. Medvedko, “BYPASS SYSTEM FOR SHUNTING OF ELECTROMAGNETS FOR ACCELERATORS AND STORAGE RINGS”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUCPH09, pp. XX-XX.
[n] Z. Li, X. Deng, Z. Pan, C. Tang, and A. Chao, “Generalized longitudinal strong focusing in a storage ring for coherent EUV radiation”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1134-1136. doi:10.18429/JACoW-IPAC2023-MOPM065
[n] M. Dracos, E. Bouquerel, G. Fanourakis, G. Gokbulut, and A. Kayis Topaksu, “The European Spallation Source Neutrino Super Beam Design Study”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 582-585. doi:10.18429/JACoW-IPAC2019-MOPRB004
[n] C. Travier, B. Leblond, M. Bernard, J. N. Cayla, P. Thomas, and P. Georges, “CANDELA Photo-Injector Experimental Results With a Dispenser Photocathode”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPB01, pp. 945-947.
[n] A. Moutardier et al., “Characterization of the Electron Beam Visualization Stations of the ThomX Accelerator”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 240-243. doi:10.18429/JACoW-IPAC2022-MOPOPT006
[n] A. Emery, T. M. Cobb, C. A. Forrester, and G. O, “Tickit: An Event-Based Multi-Device Simulation Framework”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 823-826. doi:10.18429/JACoW-ICALEPCS2023-TUPDP109
[n] W. W. Lee and S. C. Snowdon, “Design of Dipole Magnet with Circular Iron Shield”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 726-729.
[n] S. Asaoka, G. Isoyama, A. Mikuni, Y. Miyahara, and H. Nishimura, “Bunch Lengthening in SOR”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2663-2666.
[n] E. Bouquerel et al., “The ESSnuSB Target Station”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3831-3834. doi:10.18429/JACoW-IPAC2019-THPRB013
[n] L. Ristori et al., “Development and Performance of RFD Crab Cavity Prototypes for HL-LHC AUP”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 531-535. doi:10.18429/JACoW-SRF2023-TUPTB046
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Miyahara and M. Y. Lin, “”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 481-484.
- Y. Kojima, “Beam Test of a Three-Cell Structure in the Tristan Accumulation Ring”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-15, pp. XX-XX.
- A. A. Wilson, T. M. Cobb, and U. K. Pedersen, “Graduate Software Engineer Development Program at Diamond Light Source”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 96.
- R. J. Burleigh, D. J. Clark, and L. R. Glasgow, “Heavy-Ion Booster Cyclotron Design Studies at Berkeley”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper I-06, pp. 604-608.
- K. Hanke et al., “Phase Rotation, Cooling and Acceleration of Muon Beams: A Comparison of Different Approaches”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THC17, pp. 893-895.
- F. F. Cilyo, F. E. Mills, and Y. Miyahara, “Active Filter for High Current dc Magnets”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3014-3017.
- M. Alves and F. de Sá, “Slow longitudinal mode 1 instability in electron storage rings with harmonic cavities”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS32, pp. 782-785.
- V. Blackmore, “Recent Results from the Study of Emittance Evolution in MICE”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1699-1701.
- F. Senee, B. Pottin, G. Adroit, R. Gobin, O. Tuske, and A. Olivier, “Beam Species Fraction Measurement using Doppler Shift Method with FUJIKURA Fiberscope for IFMIF-EVEDA Injector”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD46, pp. 407-409.
- M. Sekiguchi et al., “A Formulation of Spiral Inflector Design and Its Application to SF Cyclotron”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper IXC-02, pp. 450-453.
- M. Fathizadeh, “Analysis and Design of a High-Current, High-Voltage Accurate Power Supply for the APS Storage Ring”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1288-1291.
- K. Sato et al., “Status of the INS 176 cm Sector Focusing Cyclotron”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper B-07, pp. 1984-1987.
- P. D. Smith, “CCT: A Code to Automate the Design of Coupled Cavities”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THB14, pp. 827-829.
- Z. Korm?íny, T. Lakatos, and A. Valek, “A Microcomputer-Based Versatile Profile Monitoring System”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F5-10, pp. 309-312.
- F. Sakamoto et al., “Beam Generation and Acceleration Experiments of X-Band Linac and Monochromatic keV X-Ray Source of the University of Tokyo”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN032, pp. 2784-2786.
- T. Garvey, M. Omeich, M. Jablonka, J. M. Joly, and H. Long, “Simulations and Measurements of the TTF Phase-1 Injector Gun”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPA14, pp. 935-937.
- F. Amman, “Beam-Beam Limits”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 858-862.
- O. Belikov, A. Chernyakin, V. Kozak, and A. Medvedko, “BYPASS SYSTEM FOR SHUNTING OF ELECTROMAGNETS FOR ACCELERATORS AND STORAGE RINGS”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper TUCPH09, pp. XX-XX.
- Z. Li, X. Deng, Z. Pan, C. Tang, and A. Chao, “Generalized longitudinal strong focusing in a storage ring for coherent EUV radiation”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM065, pp. 1134-1136.
- M. Dracos, E. Bouquerel, G. Fanourakis, G. Gokbulut, and A. Kayis Topaksu, “The European Spallation Source Neutrino Super Beam Design Study”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 582-585.
- C. Travier, B. Leblond, M. Bernard, J. N. Cayla, P. Thomas, and P. Georges, “CANDELA Photo-Injector Experimental Results With a Dispenser Photocathode”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPB01, pp. 945-947.
- A. Moutardier et al., “Characterization of the Electron Beam Visualization Stations of the ThomX Accelerator”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 240-243.
- A. Emery, T. M. Cobb, C. A. Forrester, and G. O, “Tickit: An Event-Based Multi-Device Simulation Framework”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP109, pp. 823-826.
- W. W. Lee and S. C. Snowdon, “Design of Dipole Magnet with Circular Iron Shield”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 726-729.
- S. Asaoka, G. Isoyama, A. Mikuni, Y. Miyahara, and H. Nishimura, “Bunch Lengthening in SOR”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2663-2666.
- E. Bouquerel et al., “The ESSnuSB Target Station”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3831-3834.
- L. Ristori et al., “Development and Performance of RFD Crab Cavity Prototypes for HL-LHC AUP”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper TUPTB046, pp. 531-535.
Back to search
