Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] N. V. Mokhov et al., “Crystal Collimation Studies at the Tevatron (T-980)”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE1GRC05, pp. 1836-1838.
[n] A. A. Kapustin, V. I. Petrunin, and Yu. P. Severgin, “Charged Particle Beam Achromatic Scanning System”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1315-1318.
[n] T. Oki, T. Adachi, and S. Nakamura, “High-Stability Magnet Power Supplies for SuperKEKB”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3391-3393. doi:10.18429/JACoW-IPAC2017-WEPVA057
[n] G. J. Caporaso and Y. J. Chen, “Analytic Model of Ion Emission from the Focus of an Intense Relativistic Electron Beam on a Target”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4027, pp. 830-832.
[n] M. Major et al., “Structural Investigations of Nitrogen-Doped Niobium for Superconducting RF Cavities”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 996-998. doi:10.18429/JACoW-IPAC2017-MOPVA057
[n] X. Y. Li, Y. Jiao, S. Tian, W. Yang, and H. Lu, “Four-rows APPLE-Knot undulator on HEPS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 976-979. doi:10.18429/JACoW-IPAC2023-MOPM001
[n] L. S. Nadolski et al., “Status of SOLEIL Project”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THZMA01, pp. 578-582.
[n] M.-C. Lin et al., “Installation and Commissioning of the 200m Flexible Cryogenic Transfer System”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA075, pp. 3843-3845.
[n] J. Park, H.-S. Kang, and C. Kim, “Electron-Linac Based fs-THz Program at Pohang Accelerator Laboratory”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOPPH077, pp. 155-156.
[n] P. Piot, M. B. Andorf, G. Fagerberg, and M. Figora, “Development of Short Undulators for Electron-Beam-Radiation Interaction Studies”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 380-382. doi:10.18429/JACoW-NAPAC2016-TUPOA47
[n] M. C. Bellachioma, M. Bender, H. Kollmus, A. Kr?ñmer, J. Kurdal, and H. Reich-Sprenger, “Thin Film Coating for the Upgrade of the Ion Synchrotron SIS18 at GSI”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP014, pp. 378-380.
[n] T. K. Charles, F. Zimmermann, M. J. Boland, and K. Oide, “Bunch Compression and Turnaround Loops Design in the FCC-ee Injector Complex”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3044-3047. doi:10.18429/JACoW-IPAC2018-THPAF037
[n] W. B. Wilson et al., “Beam Diagnostics and Improvements at TAMVEC”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 299-303.
[n] R. D. Ryne, C. E. Mitchell, J. Qiang, and B. E. Carlsten, “Self-Consistent Modeling using a Lienard-Wiechert Particle-Mesh Method”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3313-3315. doi:10.18429/JACoW-IPAC2018-THPAK044
[n] N. M. Fewell and V. LoDestro, “Operation of the Brookhaven 200-MeV Linac”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S2-4, pp. 83-87.
[n] K. Seiya, S. Chaurize, C. C. Drennan, and W. Pellico, “Injection Bucket Jitter Compensation Using Phase Lock System at Fermilab Booster”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1999-2001. doi:10.18429/JACoW-IPAC2017-TUPIK116
[n] Yu. G. Basargin, R. N. Litunovsky, O. A. Minyaev, and V. I. Vasil, “Some Peculiarities of Longitudinal Motion of the Particles in an Isochronous Cyclotron”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 322-329.
[n] F. Pedersen, “Beam Loading Effects in the CERN PS Booster”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1906-1910.
[n] L. Torino, U. Iriso, and T. M. Mitsuhashi, “Beam Size Measurements using Synchrotron Radiation Interferometry at ALBA”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPF23, pp. 374-379.
[n] D. Neuffer et al., “Observation of Space-Charge Effects in the Los Alamos Proton Storage Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1893-1896.
[n] E. P. Chamberlin, J. L. McKibben, and R. R. Stevens, “The LAMPF Polarized Ion Facility: Status Report”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1524-1527.
[n] H. Li, N. Yang, and Z. Zhao, “Theoretical studies on polarization control of segmental undulator system”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1250-1253. doi:10.18429/JACoW-IPAC2023-MOPM116
[n] T. Powers, L. Phillips, V. Nguyen-Tuong, and C. Reece, “Some Operational Characteristics of CEBAF RF Windows at 2 K”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1007-1010.
[n] L. L. Reginato, N. J. Dobeck, and B. H. Smith, “PCM Telemetry System for 3-MV Superhilac Injector”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 387-389.
[n] O. Heid and T. J. S. Hughes, “Compact Solid State Direct Drive RF LINAC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD002, pp. 4278-4280.
[n] R. Huang et al., “Preliminary design on the accelerator of an infrared free electron laser oscillator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1961-1963. doi:10.18429/JACoW-IPAC2023-TUPL101
[n] S. F. Mikhailov et al., “Multibunch Injection Scheme for the Duke Booster Synchrotron for Top-Off Injection”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP066, pp. 1238-1240.
[n] S. P. Antipov, S. V. Kuzikov, A. Liu, A. V. Savilov, and A. A. Vikharev, “Tapered Flying Radiofrequency Undulator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4059-4061. doi:10.18429/JACoW-IPAC2018-THPMF012
[n] J. Sheehan and H. Langenbach, “Power Supply Regulation by Microprocesser”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2876-2879.
[n] M. Lokaichik et al., “Dedicated Proton Accelerator Complex for a Comprehensive Oncology Centre”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP6B03, pp. 2536-2538.
[n] S. R. Tiwari, M. Borage, and K. Swarna, “Analysis and Design of Parallel Resonant Network Power Supply for a Rapid Cycling Synchrotron”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA045, pp. 685-687.
[n] J. W. Beal, “On the Design of Axially Symmetric Electron Guns”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 93-98.
[n] A. V. Bubley, M. I. Bryzgunov, A. V. Ivanov, A. M. Kruchkov, V. V. Parkhomchuk, and V. B. Reva, “Electron Gun with Variable Beam Profile for COSY Cooler”, in Proc. COOL'11, Alushta, Ukraine, Sep. 2011, paper TUPS06, pp. 99-102.
[n] L. Dovlatyan, B. L. Beaudoin, R. A. Kishek, and K. J. Ruisard, “Steering Optimizations for the University of Maryland Electron Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4913-4916. doi:10.18429/JACoW-IPAC2018-THPML107
[n] V. Grishin, B. Dehning, A. V. Koshelev, A. Larionov, V. S. Seleznev, and M. Sleptsov, “Ionization Chambers as Beam Loss Monitors for ESS Linear Accelerator”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 454-457. doi:10.18429/JACoW-IBIC2017-WEPWC03
[n] V. Ranjbar, S. Y. Lee, M. Bai, E. Courant, and W. W. MacKay, “Mapping Out the Full Spin Resonance Structure of RHIC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH139, pp. 3177-3179.
[n] W. R. Fowkes, R. S. Callin, S. G. Tantawi, and E. L. Wright, “Reduced Field TE01 X-Band Traveling Wave Window”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ28, pp. 1587-1589.
[n] S. Peggs, A. Bogacz, and F. Harfoush, “A Comparison of Transition Jump Schemes for the Main Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1660-1663.
[n] Yu. A. Rogovsky, D. E. Berkaev, A. N. Kyrpotin, I. Nesterenko, and A. L. Romanov, “Beam Measurements With Visible Synchrotron Light on VEPP-2000 Collider”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUPSA030, pp. 104-106.
[n] A. A. Drozdovsky et al., “The Nonlinear Transformation of a Ions Beam in the Plasma Lens”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THCHA01, pp. 280-282.
[n] U. Iriso, L. Torino, and T. M. Mitsuhashi, “Transverse Beam Size Measurements Using Interferometry at ALBA”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPF01, pp. 193-196.
[n] T. Oliver, “Mechanical Design of ALS-U Swap-out Kicker Stripline Electrodes”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, paper MOPC15, pp. XX-XX.
[n] J. Hyun et al., “Beam characterization and lessons learned from beam commissioning prior to SRF linac integration”, in Proc. SRF'25, Tokyo, Japan, Sep. 2025, pp. 321-326. doi:10.18429/JACoW-SRF2025-TUP08
[n] A. E. Shikanov, K. I. Kozlovskiy, V. L. Shatokhin, and E. D. Vovchenko, “Hydrogen Nuclides Acceleration from Laser Plasma in the Diode with Magnetic Insulation of Electrons”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC48, pp. 435-437.
[n] S. Arai, T. Fujino, T. Fukushima, T. Hattori, J. Tojo, and N. Tokuda, “A Proton Accelerating Model of Uranium RFQ”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 270-273.
[n] M. E. Angoletta et al., “An Ultra Low-Noise AC Beam Transformer and Digital Signal Processing System for CERN's ELENA Ring”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPF27, pp. 571-574.
[n] L. H. Chang et al., “Performance of the SRRC/TLS torage Ring RF System”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP090L, pp. 2065-2067.
[n] H. Ryuto, “ROTATING CARBON DISK STRIPPER FOR INTENSE HEAVY-ION BEAMS”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19P24, pp. XX-XX.
[n] H. Euteneuer et al., “Operating Experience with MAMI I”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper A202, pp. 22-24.
[n] J. Helsper, S. Kazakov, D. Longuevergne, D. Passarelli, N. Solyak, and S. Wallon, “Design, Manufacturing, Assembly, and Lessons Learned of the Pre-Production 325 MHz Couplers for the PIP-II Project at Fermilab”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 806-811. doi:10.18429/JACoW-SRF2023-WEPWB094
[n] A. V. Watkins, M. Jensen, M. Maddock, S. A. Pande, S. Rains, and D. Spink, “RF Distribution System of the Diamond Master Oscillator”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH168, pp. 3188-3190.
[n] M. L. Mallory, P. Brindza, H. Laumer, and D. Poe, “Operating Experience with the Cryogenic Systems for a Superconducting Cyclotron”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3263-3266.
[n] J. S. Moenich and J. J. Peerson, “Pressure Differential Gate Valve”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 130-131.
For LaTeX
Use Complete Form
For BibTeX
References
- N. V. Mokhov et al., “Crystal Collimation Studies at the Tevatron (T-980)”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE1GRC05, pp. 1836-1838.
- A. A. Kapustin, V. I. Petrunin, and Yu. P. Severgin, “Charged Particle Beam Achromatic Scanning System”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1315-1318.
- T. Oki, T. Adachi, and S. Nakamura, “High-Stability Magnet Power Supplies for SuperKEKB”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3391-3393.
- G. J. Caporaso and Y. J. Chen, “Analytic Model of Ion Emission from the Focus of an Intense Relativistic Electron Beam on a Target”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4027, pp. 830-832.
- M. Major et al., “Structural Investigations of Nitrogen-Doped Niobium for Superconducting RF Cavities”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 996-998.
- X. Y. Li, Y. Jiao, S. Tian, W. Yang, and H. Lu, “Four-rows APPLE-Knot undulator on HEPS”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM001, pp. 976-979.
- L. S. Nadolski et al., “Status of SOLEIL Project”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THZMA01, pp. 578-582.
- M.-C. Lin et al., “Installation and Commissioning of the 200m Flexible Cryogenic Transfer System”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA075, pp. 3843-3845.
- J. Park, H.-S. Kang, and C. Kim, “Electron-Linac Based fs-THz Program at Pohang Accelerator Laboratory”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper MOPPH077, pp. 155-156.
- P. Piot, M. B. Andorf, G. Fagerberg, and M. Figora, “Development of Short Undulators for Electron-Beam-Radiation Interaction Studies”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 380-382.
- M. C. Bellachioma, M. Bender, H. Kollmus, A. Kr?ñmer, J. Kurdal, and H. Reich-Sprenger, “Thin Film Coating for the Upgrade of the Ion Synchrotron SIS18 at GSI”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP014, pp. 378-380.
- T. K. Charles, F. Zimmermann, M. J. Boland, and K. Oide, “Bunch Compression and Turnaround Loops Design in the FCC-ee Injector Complex”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3044-3047.
- W. B. Wilson et al., “Beam Diagnostics and Improvements at TAMVEC”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 299-303.
- R. D. Ryne, C. E. Mitchell, J. Qiang, and B. E. Carlsten, “Self-Consistent Modeling using a Lienard-Wiechert Particle-Mesh Method”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3313-3315.
- N. M. Fewell and V. LoDestro, “Operation of the Brookhaven 200-MeV Linac”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S2-4, pp. 83-87.
- K. Seiya, S. Chaurize, C. C. Drennan, and W. Pellico, “Injection Bucket Jitter Compensation Using Phase Lock System at Fermilab Booster”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1999-2001.
- Yu. G. Basargin, R. N. Litunovsky, O. A. Minyaev, and V. I. Vasil, “Some Peculiarities of Longitudinal Motion of the Particles in an Isochronous Cyclotron”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 322-329.
- F. Pedersen, “Beam Loading Effects in the CERN PS Booster”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1906-1910.
- L. Torino, U. Iriso, and T. M. Mitsuhashi, “Beam Size Measurements using Synchrotron Radiation Interferometry at ALBA”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper TUPF23, pp. 374-379.
- D. Neuffer et al., “Observation of Space-Charge Effects in the Los Alamos Proton Storage Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1893-1896.
- E. P. Chamberlin, J. L. McKibben, and R. R. Stevens, “The LAMPF Polarized Ion Facility: Status Report”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1524-1527.
- H. Li, N. Yang, and Z. Zhao, “Theoretical studies on polarization control of segmental undulator system”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM116, pp. 1250-1253.
- T. Powers, L. Phillips, V. Nguyen-Tuong, and C. Reece, “Some Operational Characteristics of CEBAF RF Windows at 2 K”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1007-1010.
- L. L. Reginato, N. J. Dobeck, and B. H. Smith, “PCM Telemetry System for 3-MV Superhilac Injector”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 387-389.
- O. Heid and T. J. S. Hughes, “Compact Solid State Direct Drive RF LINAC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD002, pp. 4278-4280.
- R. Huang et al., “Preliminary design on the accelerator of an infrared free electron laser oscillator”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL101, pp. 1961-1963.
- S. F. Mikhailov et al., “Multibunch Injection Scheme for the Duke Booster Synchrotron for Top-Off Injection”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5RFP066, pp. 1238-1240.
- S. P. Antipov, S. V. Kuzikov, A. Liu, A. V. Savilov, and A. A. Vikharev, “Tapered Flying Radiofrequency Undulator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4059-4061.
- J. Sheehan and H. Langenbach, “Power Supply Regulation by Microprocesser”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2876-2879.
- M. Lokaichik et al., “Dedicated Proton Accelerator Complex for a Comprehensive Oncology Centre”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP6B03, pp. 2536-2538.
- S. R. Tiwari, M. Borage, and K. Swarna, “Analysis and Design of Parallel Resonant Network Power Supply for a Rapid Cycling Synchrotron”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA045, pp. 685-687.
- J. W. Beal, “On the Design of Axially Symmetric Electron Guns”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 93-98.
- A. V. Bubley, M. I. Bryzgunov, A. V. Ivanov, A. M. Kruchkov, V. V. Parkhomchuk, and V. B. Reva, “Electron Gun with Variable Beam Profile for COSY Cooler”, in Proc. 8th Workshop on Beam Cooling and Related Topics (COOL'11), Alushta, Ukraine, Sep. 2011, paper TUPS06, pp. 99-102.
- L. Dovlatyan, B. L. Beaudoin, R. A. Kishek, and K. J. Ruisard, “Steering Optimizations for the University of Maryland Electron Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4913-4916.
- V. Grishin, B. Dehning, A. V. Koshelev, A. Larionov, V. S. Seleznev, and M. Sleptsov, “Ionization Chambers as Beam Loss Monitors for ESS Linear Accelerator”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 454-457.
- V. Ranjbar, S. Y. Lee, M. Bai, E. Courant, and W. W. MacKay, “Mapping Out the Full Spin Resonance Structure of RHIC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH139, pp. 3177-3179.
- W. R. Fowkes, R. S. Callin, S. G. Tantawi, and E. L. Wright, “Reduced Field TE01 X-Band Traveling Wave Window”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAQ28, pp. 1587-1589.
- S. Peggs, A. Bogacz, and F. Harfoush, “A Comparison of Transition Jump Schemes for the Main Injector”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1660-1663.
- Yu. A. Rogovsky, D. E. Berkaev, A. N. Kyrpotin, I. Nesterenko, and A. L. Romanov, “Beam Measurements With Visible Synchrotron Light on VEPP-2000 Collider”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper TUPSA030, pp. 104-106.
- A. A. Drozdovsky et al., “The Nonlinear Transformation of a Ions Beam in the Plasma Lens”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper THCHA01, pp. 280-282.
- U. Iriso, L. Torino, and T. M. Mitsuhashi, “Transverse Beam Size Measurements Using Interferometry at ALBA”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPF01, pp. 193-196.
- T. Oliver, “Mechanical Design of ALS-U Swap-out Kicker Stripline Electrodes”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, paper MOPC15, pp. XX-XX.
- J. Hyun et al., “Beam characterization and lessons learned from beam commissioning prior to SRF linac integration”, in Proc. 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, pp. 321-326.
- A. E. Shikanov, K. I. Kozlovskiy, V. L. Shatokhin, and E. D. Vovchenko, “Hydrogen Nuclides Acceleration from Laser Plasma in the Diode with Magnetic Insulation of Electrons”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC48, pp. 435-437.
- S. Arai, T. Fujino, T. Fukushima, T. Hattori, J. Tojo, and N. Tokuda, “A Proton Accelerating Model of Uranium RFQ”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 270-273.
- M. E. Angoletta et al., “An Ultra Low-Noise AC Beam Transformer and Digital Signal Processing System for CERN's ELENA Ring”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPF27, pp. 571-574.
- L. H. Chang et al., “Performance of the SRRC/TLS torage Ring RF System”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP090L, pp. 2065-2067.
- H. Ryuto, “ROTATING CARBON DISK STRIPPER FOR INTENSE HEAVY-ION BEAMS”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 19P24, pp. XX-XX.
- H. Euteneuer et al., “Operating Experience with MAMI I”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper A202, pp. 22-24.
- J. Helsper, S. Kazakov, D. Longuevergne, D. Passarelli, N. Solyak, and S. Wallon, “Design, Manufacturing, Assembly, and Lessons Learned of the Pre-Production 325 MHz Couplers for the PIP-II Project at Fermilab”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper WEPWB094, pp. 806-811.
- A. V. Watkins, M. Jensen, M. Maddock, S. A. Pande, S. Rains, and D. Spink, “RF Distribution System of the Diamond Master Oscillator”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH168, pp. 3188-3190.
- M. L. Mallory, P. Brindza, H. Laumer, and D. Poe, “Operating Experience with the Cryogenic Systems for a Superconducting Cyclotron”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3263-3266.
- J. S. Moenich and J. J. Peerson, “Pressure Differential Gate Valve”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 130-131.
Back to search