Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] V. P. Belov and Yu. P. Severgin, “Ions Acceleration in the Synchrotrons with Constant RF of Electrical Field”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3820-3822.
[n] P. Valente et al., “Long Beam Pulses With SLED Compression in DANE LINAC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1434-1436. doi:10.18429/JACoW-IPAC2017-TUPAB048
[n] T. Birke et al., “A Tune Feed Forward System for the BESSY II Storage Ring”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP554, pp. XX-XX.
[n] S. L. Shope et al., “Laser Generation and Transport of a Relativistic Electron Beam”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3092-3095.
[n] G. Rakowsky, “Enhancement of NSLS Sextupoles Using Permanent Magnets”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH012, pp. 3242-3244.
[n] G. De Ninno, “The Challenges of Seeded FELs”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOCAU02, pp. XX-XX.
[n] B. Günther, L. Forster, M. Dierolf, K. Achterhold, and F. Pfeiffer, “Single-shot determination of the Munich Compact Light Source’s two-dimensional X-ray source profile based on a backprojection approach”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPG81, unpublished.
[n] J. Feikes et al., “Commissioning and Operation of the Metrology Light Source (MLS)”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC012, pp. 2010-2012.
[n] J.-F. Ostiguy and F. Mills, “Large Aperture Magnets for a Future High Power Proton Synchrotron”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH014, pp. 3248-3250.
[n] T. J. Shea, J. Mead, P. Cerniglia, and C. Degen, “Evaluation of IEEE 1394 Serial Bus for Distributed Data Acquisition”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P025, pp. 2502-2504.
[n] K. Kan, T. Asaka, Y. Hosaka, N. Nishimori, S. Obara, and K. Ueshima, “Stable generation of high-quality beam by 3-GeV low-emittance linear accelerator in NanoTerasu”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1189-1191. doi:10.18429/JACoW-IPAC2025-TUPM012
[n] O. Dressler and J. Feikes, “Operational Experiences with the BESSY II Injection System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA87, pp. 1279-1281.
[n] F. Marhauser, O. Dressler, V. Duerr, and J. Feikes, “Impedances in Slotted-Pipe Kicker Magnets”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS115, pp. 2649-2651.
[n] Yu. P. Severgin and M. Z. Filimonov, “Insulating and Metal-Ceramic Materials for Particle Accelerators”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2208-2210.
[n] S.-C. Kim et al., “New Magnet Power Supply for PAL Linac”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS132, pp. 2685-2687.
[n] M. Fouaidy, “SRF Activities at IPN Orsay”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper MOP004, pp. 41-45.
[n] P. K. Saha, H. Harada, N. Hayashi, A. Miura, K. Okabe, and M. Yoshimoto, “Measurement of Each 324 MHz Micro Pulse Stripping Efficiency for H- Laser Stripping Experiment in J-PARC RCS”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 233-236. doi:10.18429/JACoW-IBIC2017-TUPCF12
[n] I. Miura et al., “Commissioning of the RCNP Ring Cyclotron (Invited Paper)”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper I-01, pp. 3-10.
[n] M. Abs et al., “Progress report on the Construction of the Proton Therapy Equipment for MGH”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP01C, pp. 2354-2356.
For LaTeX
Use Complete Form
For BibTeX
References
- V. P. Belov and Yu. P. Severgin, “Ions Acceleration in the Synchrotrons with Constant RF of Electrical Field”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3820-3822.
- P. Valente et al., “Long Beam Pulses With SLED Compression in DANE LINAC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1434-1436.
- T. Birke et al., “A Tune Feed Forward System for the BESSY II Storage Ring”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP554, pp. XX-XX.
- S. L. Shope et al., “Laser Generation and Transport of a Relativistic Electron Beam”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3092-3095.
- G. Rakowsky, “Enhancement of NSLS Sextupoles Using Permanent Magnets”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH012, pp. 3242-3244.
- G. De Ninno, “The Challenges of Seeded FELs”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper MOCAU02, pp. XX-XX.
- B. Günther, L. Forster, M. Dierolf, K. Achterhold, and F. Pfeiffer, “Single-shot determination of the Munich Compact Light Source’s two-dimensional X-ray source profile based on a backprojection approach”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG81, unpublished.
- J. Feikes et al., “Commissioning and Operation of the Metrology Light Source (MLS)”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC012, pp. 2010-2012.
- J.-F. Ostiguy and F. Mills, “Large Aperture Magnets for a Future High Power Proton Synchrotron”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH014, pp. 3248-3250.
- T. J. Shea, J. Mead, P. Cerniglia, and C. Degen, “Evaluation of IEEE 1394 Serial Bus for Distributed Data Acquisition”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P025, pp. 2502-2504.
- K. Kan, T. Asaka, Y. Hosaka, N. Nishimori, S. Obara, and K. Ueshima, “Stable generation of high-quality beam by 3-GeV low-emittance linear accelerator in NanoTerasu”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM012, pp. 1189-1191.
- O. Dressler and J. Feikes, “Operational Experiences with the BESSY II Injection System”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA87, pp. 1279-1281.
- F. Marhauser, O. Dressler, V. Duerr, and J. Feikes, “Impedances in Slotted-Pipe Kicker Magnets”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS115, pp. 2649-2651.
- Yu. P. Severgin and M. Z. Filimonov, “Insulating and Metal-Ceramic Materials for Particle Accelerators”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2208-2210.
- S.-C. Kim et al., “New Magnet Power Supply for PAL Linac”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS132, pp. 2685-2687.
- M. Fouaidy, “SRF Activities at IPN Orsay”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper MOP004, pp. 41-45.
- P. K. Saha, H. Harada, N. Hayashi, A. Miura, K. Okabe, and M. Yoshimoto, “Measurement of Each 324 MHz Micro Pulse Stripping Efficiency for H- Laser Stripping Experiment in J-PARC RCS”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 233-236.
- I. Miura et al., “Commissioning of the RCNP Ring Cyclotron (Invited Paper)”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper I-01, pp. 3-10.
- M. Abs et al., “Progress report on the Construction of the Proton Therapy Equipment for MGH”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP01C, pp. 2354-2356.
Back to search