Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. Samoilenko et al., “First beam heating with the laser heater for FLASH2020+”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1950-1953. doi:10.18429/JACoW-IPAC2023-TUPL098
[n] P. Boehler et al., “Experience With the Commissioning of the U15-Undulator for SwissFEL-Aramis Beamline and New Developments for the Athos Beamline”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 283-287. doi:10.18429/JACoW-MEDSI2016-WECA03
[n] M. Bieler, S. Choroba, R. Giebeler, S. Gold, J. Hameister, and H.-Ch. Lewin, “Commissioning of the Hard Tube Pulser Experiment at DESY”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1933-1936.
[n] R. Thomas, D. J. Ciardullo, and W. Van Zwienen, “Design and Testing of the AGS Booster BPM Detector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1344-1347.
[n] A. Y. Murokh et al., “Re-Circulated Inverse Compton Scattering X-ray Source for Industrial Applications”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP002, pp. 2139-2141.
[n] Q. Wu, “The Design of a High Current 2.45 GHz Microwave Ion Source for an Electromagnetic Isotope Separator”, presented at the ECRIS'22, Ahmedabad, India, Oct. 2022, paper FRP2PG027, unpublished.
[n] I. Karnaukhov, S. Kononenko, A. Shcherbakov, V. Nemoshkalenko, V. Molodkin, and A. Shpak, “A Combined Magnet Lattice of the Synchrotron Light Source ISI-800”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAR16, pp. 296-298.
[n] R. L. Sheffield and E. J. Pitcher, “The Role of Accelerators in the Energy Problem”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUZRA01, pp. 1314-1318.
[n] C.-S. Fann, J. P. Chiou, K.-B. Liu, and J.-T. Sheu, “Simulation of Kicker Pulser with Matlab Simulink”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH037, pp. 3753-3755.
[n] A. Zholents, M. Zolotorev, and W. Wan, “Generation of Attosecond Electron Bunches”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAC004, pp. 723-725.
[n] J. R. Cary, “Longitudinal Cooling of a Strongly Magnetized Electron Plasma”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAE040, pp. 2026-2028.
[n] V. Bharadwaj, S. Peggs, C. Saltmarsh, and G. Wu, “Proposed Data Acquisition System for the Fermilab Booster”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1458-1461.
[n] T. Bertuccio, J. C. Collins, B. Manwaring, G. Mower, J. Tyson, and S. Lewis, “Growth of the IUCF Control System”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-09, pp. 2341-2344.
[n] P. Stillman et al., “Neutrino Horn Power Supply Operational Experience”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1746-1749.
[n] T. Hoffmann, H. Br?ñuning, and R. Haseitl, “LASSIE: The Large Analogue Signal and Scaling Information Environment for FAIR”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMN008, pp. 250-252.
[n] I. Bustinduy et al., “The ESS MEBT RF Buncher Cavities Conditioning Process”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1107-1109. doi:10.18429/JACoW-IPAC2021-MOPAB356
[n] R. M. Lill et al., “Design and Performance of the LCLS Cavity BPM System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN111, pp. 4366-4368.
[n] T. Tajima, “Would >50 MV/m be Possible with Superconducting RF Cavities?”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THOCS1, pp. 2119-2123.
[n] T. C. Fan, C. S. Hwang, and P. K. Tseng, “A Simple Magnet Multipole Measurement System”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2244-2247.
[n] Ph. Bernard, A. Chincarini, G. Gemme, R. Parodi, and E. Picasso, “RFSC Cavities for the Detection of Gravitational Waves: Recent Updates and Future Trends”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PZ001, pp. XX-XX.
[n] C. Johnstone, D. Bogert, J. Lackey, and R. Tomlin, “Stripping Foil Losses and Space Charge Blowup in the FNAL Booster”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 860-863.
[n] R. A. Legg, M. V. Fisher, K. J. Kleman, T. L. Grimm, R. Jecks, and B. Kuhlman, “Development of a Frequency Map for the WiFEL SRF Gun”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO032, pp. 151-153.
[n] M. Gro?ƒ et al., “Emittance Reduction of RF Photoinjector Generated Electron Beams By Transverse Laser Beam Shaping”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1958-1960. doi:10.18429/JACoW-IPAC2019-TUPTS012
[n] M. Paraliev, M. Aiba, S. Dordevic, C. H. Gough, and A. Streun, “Development of Fast and Super-Fast Kicker System for SLS 2.0 Injection”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2889-2892. doi:10.18429/JACoW-IPAC2021-WEPAB122
[n] M. A. Ibrahim et al., “FPGA Architectures for Distributed ML Systems for Real-Time Beam Loss De-Blending”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 160-163. doi:10.18429/JACoW-IBIC2023-TU3C02
[n] G. A. Bowers et al., “User Interface Framework for the National Ignition Facility (NIF)”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPA26, pp. 146-148.
[n] A. Bechtold et al., “The MAFF IH-RFQ Test Stand at the IAP Frankfurt”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS038, pp. 1577-1579.
[n] W. Meyer et al., “Generation of High Power 140 GHz Microwaves with an FEL for the MTX Experiment”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1551-1554.
[n] T. Boltz et al., “Feedback Design for Control of the Micro-Bunching Instability based on Reinforcement Learning”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 104-107. doi:10.18429/JACoW-IPAC2019-MOPGW017
[n] C. Ozkan Loch, R. Ischebeck, N. Samadi, A. M. M. Stampfli, and J. Vila Comamala, “SLS 2.0 ÔÇô Status of the Diagnostics”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 15-18. doi:10.18429/JACoW-IBIC2022-MOP01
For LaTeX
Use Complete Form
For BibTeX
References
- D. Samoilenko et al., “First beam heating with the laser heater for FLASH2020+”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL098, pp. 1950-1953.
- P. Boehler et al., “Experience With the Commissioning of the U15-Undulator for SwissFEL-Aramis Beamline and New Developments for the Athos Beamline”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 283-287.
- M. Bieler, S. Choroba, R. Giebeler, S. Gold, J. Hameister, and H.-Ch. Lewin, “Commissioning of the Hard Tube Pulser Experiment at DESY”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1933-1936.
- R. Thomas, D. J. Ciardullo, and W. Van Zwienen, “Design and Testing of the AGS Booster BPM Detector”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1344-1347.
- A. Y. Murokh et al., “Re-Circulated Inverse Compton Scattering X-ray Source for Industrial Applications”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP002, pp. 2139-2141.
- Q. Wu, “The Design of a High Current 2.45 GHz Microwave Ion Source for an Electromagnetic Isotope Separator”, presented at the 25th International Workshop on ECR Ion Sources (ECRIS'22), Ahmedabad, India, Oct. 2022, paper FRP2PG027, unpublished.
- I. Karnaukhov, S. Kononenko, A. Shcherbakov, V. Nemoshkalenko, V. Molodkin, and A. Shpak, “A Combined Magnet Lattice of the Synchrotron Light Source ISI-800”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAR16, pp. 296-298.
- R. L. Sheffield and E. J. Pitcher, “The Role of Accelerators in the Energy Problem”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUZRA01, pp. 1314-1318.
- C.-S. Fann, J. P. Chiou, K.-B. Liu, and J.-T. Sheu, “Simulation of Kicker Pulser with Matlab Simulink”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH037, pp. 3753-3755.
- A. Zholents, M. Zolotorev, and W. Wan, “Generation of Attosecond Electron Bunches”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FOAC004, pp. 723-725.
- J. R. Cary, “Longitudinal Cooling of a Strongly Magnetized Electron Plasma”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAE040, pp. 2026-2028.
- V. Bharadwaj, S. Peggs, C. Saltmarsh, and G. Wu, “Proposed Data Acquisition System for the Fermilab Booster”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1458-1461.
- T. Bertuccio, J. C. Collins, B. Manwaring, G. Mower, J. Tyson, and S. Lewis, “Growth of the IUCF Control System”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper F-09, pp. 2341-2344.
- P. Stillman et al., “Neutrino Horn Power Supply Operational Experience”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1746-1749.
- T. Hoffmann, H. Br?ñuning, and R. Haseitl, “LASSIE: The Large Analogue Signal and Scaling Information Environment for FAIR”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMN008, pp. 250-252.
- I. Bustinduy et al., “The ESS MEBT RF Buncher Cavities Conditioning Process”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1107-1109.
- R. M. Lill et al., “Design and Performance of the LCLS Cavity BPM System”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN111, pp. 4366-4368.
- T. Tajima, “Would >50 MV/m be Possible with Superconducting RF Cavities?”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THOCS1, pp. 2119-2123.
- T. C. Fan, C. S. Hwang, and P. K. Tseng, “A Simple Magnet Multipole Measurement System”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2244-2247.
- Ph. Bernard, A. Chincarini, G. Gemme, R. Parodi, and E. Picasso, “RFSC Cavities for the Detection of Gravitational Waves: Recent Updates and Future Trends”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PZ001, pp. XX-XX.
- C. Johnstone, D. Bogert, J. Lackey, and R. Tomlin, “Stripping Foil Losses and Space Charge Blowup in the FNAL Booster”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 860-863.
- R. A. Legg, M. V. Fisher, K. J. Kleman, T. L. Grimm, R. Jecks, and B. Kuhlman, “Development of a Frequency Map for the WiFEL SRF Gun”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO032, pp. 151-153.
- M. Gro?ƒ et al., “Emittance Reduction of RF Photoinjector Generated Electron Beams By Transverse Laser Beam Shaping”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1958-1960.
- M. Paraliev, M. Aiba, S. Dordevic, C. H. Gough, and A. Streun, “Development of Fast and Super-Fast Kicker System for SLS 2.0 Injection”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2889-2892.
- M. A. Ibrahim et al., “FPGA Architectures for Distributed ML Systems for Real-Time Beam Loss De-Blending”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper TU3C02, pp. 160-163.
- G. A. Bowers et al., “User Interface Framework for the National Ignition Facility (NIF)”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPA26, pp. 146-148.
- A. Bechtold et al., “The MAFF IH-RFQ Test Stand at the IAP Frankfurt”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS038, pp. 1577-1579.
- W. Meyer et al., “Generation of High Power 140 GHz Microwaves with an FEL for the MTX Experiment”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1551-1554.
- T. Boltz et al., “Feedback Design for Control of the Micro-Bunching Instability based on Reinforcement Learning”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 104-107.
- C. Ozkan Loch, R. Ischebeck, N. Samadi, A. M. M. Stampfli, and J. Vila Comamala, “SLS 2.0 ÔÇô Status of the Diagnostics”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 15-18.
Back to search