JaCoW Logo

Reference Search

Favourites


For Word

[n]	S. A. Smith, C. Haddock, R. Jayakumar, J. Turner, and J. Zbasnik, “Mechanical Analysis of Beam Tube Assemblies for SSC Dipoles During a Quench”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2206-2209. 
[n]	J. Sebek and C. Limborg, “Theoretical model of longitudinal relaxation oscillations induced by HOMs”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP67, pp. 3107-3109. 
[n]	R. Li and F. Marhauser, “Analysis of Multibunch Spectrum for an Uneven Bunch Distribution in a Storage Ring”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2058-2061. doi:10.18429/JACoW-IPAC2021-TUPAB257
[n]	S. G. Tantawi et al., “The Next Linear Collider Test Accelerator's RF Pulse Compression and Transmission Systems”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P058, pp. 3192-3194. 
[n]	P. W. Allison and R. R. Stevens Jr, “The Beam Transport Design for the LAMPF Injector”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper E-7, pp. 364-371. 
[n]	K. Yu, Q. S. Shu, J. Zbasnik, J. Maddocks, W. Clay, and G. Morales, “Thermal Model and Associated Novel Approach for Synchrotron Radiation Liner with End Cooling”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3891-3894. 
[n]	D. Li, J. Corlett, and W. Turner, “Temperature Distribution Calculations on Beryllium Windows in RF Cavities for a Muon Collider”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4089, pp. 273-275. 
[n]	J. Rodnizki et al., “SARAF Phase-I HWR Coupler Cooling Design”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP066, pp. 1073-1076. 
[n]	O. Mohsen, R. Ainsworth, and N. Eddy, “Waker Experiments at Fermilab Recycler Ring”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 124-127. doi:10.18429/JACoW-NAPAC2022-MOPA33
[n]	J. Carson, S. Gourlay, M. J. Lamm, P. M. Mantsch, and A. Riddiford, “Fabrication and Performance of a New High-gradient Trim Quadrupole for the Fermilab Luminosity Upgrade”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2236-2239. 
[n]	K. R. Kim et al., “Reliability and Maintenance of PLS Linac Mechanical Systems”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH475, pp. 770-772. 
[n]	O. Mohsen et al., “Simulations and Experimental Plans for a High-Repetition-Rate Field-Enhanced Conduction-Cooled Superconducting RF Electron Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2113-2116. doi:10.18429/JACoW-IPAC2019-TUPTS083
[n]	R. Li and Y. S. Derbenev, “Discussions on the Cancellation Effect on a Curved Orbit”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT019, pp. 1631-1633. 
[n]	C. Gonzalez-Ortiz, P. Ostroumov, and R. Ainsworth, “Optimizing the sextupole configuration for simultaneous correction of third order resonances at the recycler ring”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 736-739. doi:10.18429/JACoW-IPAC2024-MOPS16
[n]	M. Wake et al., “Magnetic Field Properties of SSC Model Dipole Magnets”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 333-336. 
[n]	J. Barale et al., “Performance of the Bevalac”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1672-1675. 
[n]	K. Yu, Q. S. Shu, K. K. Leung, and J. Zbasnik, “Effective Stress of the SSC 80 K Synchrotron Radiation Liner in a Quenching Dipole Magnet”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2787-2790. 
[n]	J. Sebek and C. Limborg, “Environmental Effects on RF Cavity Tuning”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH089, pp. 1877-1879. 
[n]	S. M. Gierman et al., “Operating a Tungsten Dispenser Cathode in Photo-Emission Mode”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP088, pp. 575-576. 
[n]	K. Ko et al., “Design Parameters for the Damped Detuned Accelerating Structure”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPA04, pp. 1058-1060. 
[n]	A. Hoffmann et al., “Optimization of the THz SASE FEL at PITZ”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL011, unpublished. 
[n]	R. Akre, T. Straumann, and K. D. Kotturi, “130-MHz, 16-Bit Four-Channel Digitizer”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPB39, pp. 475-477. 
[n]	R. Akre et al., “LCLS LLRF Upgrades to the SLAC Linac”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS036, pp. 2421-2423. 
[n]	R. Macek, R. Hutson, D. Fitzgerald, S. Frankle, and C. Wilkinson, “Monte Carlo Based Formula for Radiation Shielding Assessment in the Forward Direction”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2219-2222. 
[n]	L. D. Hansborough et al., “Mechanical Engineering of a 75-keV Proton Injector for the Low Energy Demonstration Accelerator”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6W020, pp. 2740-2742. 
[n]	D. Mihalcea et al., “Field-Emission Electron Source Embedded in a Field-Enhanced Conduction-Cooled Superconducting RF Cavity”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 192-195. doi:10.18429/JACoW-NAPAC2019-MOPLH10

For LaTeX

Use Complete Form

For BibTeX

References

Back to search