Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. M. Cousineau, “High Power Proton Beam Facilities: Operational Experience, Challenges, and the Future”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 4102-4106. doi:10.18429/JACoW-IPAC2015-FRYGB1
[n] Y. H. Chin, Y. Shobuda, and K. Takata, “ABCI Progresses and Plans: Parallel Computing and Transverse Napoly-Shobuda Integral”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN036, pp. 3306-3308.
[n] Y. Liu et al., “Laser System Design and Operation for SNS H- Beam Laser Stripping”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 57-59. doi:10.18429/JACoW-IPAC2017-MOOCB2
[n] J. Jacob et al., “Successful Beam Test of the HOM Free Superconducting SOLEIL Cavity Prototype at the ESRF”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB057, pp. 1332-1334.
[n] M. Ikegami et al., “Accelerator Physics Challenges in FRIB Driver Linac”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 27-30. doi:10.18429/JACoW-HB2016-MOPM1P80
[n] K. Akasaka and S. Kamada, “Experimental Study of Head-Tail Damping and Nonlinear Filamentation Based on Precise Analysis of Coherent Betatron Oscillations in Electron Storage Rings”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP049L, pp. 1141-1143.
[n] S. Kamada et al., “Operational Results of Optics Handling and Closed Orbit Correction in the TRISTAN Accumulation Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2065-2068.
[n] S. Takeda et al., “Test Accelerator Facility for Linear Colliders”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1841-1844.
[n] S. Hunt, “An Integrated Environment for Control System Development”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP711, pp. XX-XX.
[n] Y. Shobuda, Y. H. Chin, and K. Takata, “Extension of Napoly Integral for Transverse Wake Potentials to General Axisymmetric Structure”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN046, pp. 3333-3335.
[n] C. M. Bhat et al., “Pbar Deceleration in the Fermilab Main Injector: Tune-up Studies with Proton Beam”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WOPB005, pp. 440-442.
[n] M. Popovic, “2 GeV Superconducting Muon Linac”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THC06, pp. 866-868.
[n] P. S. Martin, “Operational Experience with Superconducting Synchrotron Magnets”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1379-1383.
[n] P. S. Martin, “Performance of the Fermilab Main Ring During the 1988-89 Tevatron Collider Operation”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1829-1831.
[n] M. L. Neubauer et al., “Injection Locked 1497 MHz Magnetron”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4322-4324. doi:10.18429/JACoW-IPAC2019-THPTS090
[n] J. Tanabe et al., “Fabrication and Test of Prototype Ring Magnets for the ALS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 566-569.
[n] M. Otani et al., “Longitudinal Measurements and Beam Tuning in the J-PARC Linac MEBT1”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 968-970. doi:10.18429/JACoW-IPAC2019-MOPTS048
[n] M. R. Kraimer, “EPICS: Operating-System-Independent Device/Driver Support”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP582, pp. XX-XX.
[n] M. Popovic, L. Allen, and C. W. Schmidt, “Fermilab Linac Injector, Revisited”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPA06, pp. 917-919.
[n] S. Kamada, Y. Kamiya, and M. Kihara, “Lattice of Photon Factory Storage Ring”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3848-3851.
[n] J. B. Murphy et al., “The Brookhaven Superconducting X-Ray Lithography Source (SXLS)”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1828-1831.
[n] P. Solans et al., “New 50 KW SSPA Transmitter for the ALBA Booster”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4237-4239. doi:10.18429/JACoW-IPAC2019-THPTS058
[n] J. Schuchman et al., “SXLS Phase II Vacuum System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2316-2319.
[n] P. S. Martin and D. Wildman, “Bunch Coalescing and Bunch Rotation in the Fermilab Main Ring: Operational Experience and Comparison with Simulations”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 785-788.
[n] B. Alberdi-Esuain, M. Abo-Bakr, P. Goslawski, S. Joly, and J. Voelker, “Simulated commissioning and lattice robustness studies for BESSY III”, presented at the IPAC'26, Deauville, France, May 2026, paper THP2035, unpublished.
[n] K. M. Ha and J. Choi, “The Control System Upgrade for the PLS Storage Ring MPSs”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP575, pp. XX-XX.
[n] M. L. Neubauer, A. Dudas, R. P. Johnson, S. A. Kahn, G. M. Kazakevich, and M. Popovic, “Phase and Frequency Locked 350 MHz Magnetron”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4325-4327. doi:10.18429/JACoW-IPAC2019-THPTS091
[n] S. M. Pruss, “Operational Experience with Collimators in the Tevatron Collider”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3802-3803.
[n] B. C. Brown, C. M. Ankenbrandt, D. Cosgrove, J. D. Garvey, R. P. Johnson, and K. Meisner, “Design of an Additional Extraction/Injection Area for the Fermilab Booster”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3173-3176.
[n] M. Popovic, A. Moretti, and R. J. Nobel, “New RF Structures for the Fermilab Linac Injector”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPA07, pp. 920-922.
[n] Y. Yamazaki et al., “Beam Physics Challenge in FRIB Driver Linac”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP045, pp. 532-534.
[n] C. Y. Wong et al., “Physics Model of an Allison Phase-Space Scanner, with Application to the FRIB Front End”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 72-76. doi:10.18429/JACoW-IBIC2017-MOPCC14
[n] C. M. Bhat et al., “Pbar Acceleration in the MI -- Tune-up Studies Using Protons”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH020, pp. 1705-1707.
For LaTeX
Use Complete Form
For BibTeX
References
- S. M. Cousineau, “High Power Proton Beam Facilities: Operational Experience, Challenges, and the Future”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 4102-4106.
- Y. H. Chin, Y. Shobuda, and K. Takata, “ABCI Progresses and Plans: Parallel Computing and Transverse Napoly-Shobuda Integral”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN036, pp. 3306-3308.
- Y. Liu et al., “Laser System Design and Operation for SNS H- Beam Laser Stripping”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 57-59.
- J. Jacob et al., “Successful Beam Test of the HOM Free Superconducting SOLEIL Cavity Prototype at the ESRF”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB057, pp. 1332-1334.
- M. Ikegami et al., “Accelerator Physics Challenges in FRIB Driver Linac”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 27-30.
- K. Akasaka and S. Kamada, “Experimental Study of Head-Tail Damping and Nonlinear Filamentation Based on Precise Analysis of Coherent Betatron Oscillations in Electron Storage Rings”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP049L, pp. 1141-1143.
- S. Kamada et al., “Operational Results of Optics Handling and Closed Orbit Correction in the TRISTAN Accumulation Ring”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2065-2068.
- S. Takeda et al., “Test Accelerator Facility for Linear Colliders”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1841-1844.
- S. Hunt, “An Integrated Environment for Control System Development”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP711, pp. XX-XX.
- Y. Shobuda, Y. H. Chin, and K. Takata, “Extension of Napoly Integral for Transverse Wake Potentials to General Axisymmetric Structure”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN046, pp. 3333-3335.
- C. M. Bhat et al., “Pbar Deceleration in the Fermilab Main Injector: Tune-up Studies with Proton Beam”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WOPB005, pp. 440-442.
- M. Popovic, “2 GeV Superconducting Muon Linac”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THC06, pp. 866-868.
- P. S. Martin, “Operational Experience with Superconducting Synchrotron Magnets”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1379-1383.
- P. S. Martin, “Performance of the Fermilab Main Ring During the 1988-89 Tevatron Collider Operation”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1829-1831.
- M. L. Neubauer et al., “Injection Locked 1497 MHz Magnetron”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4322-4324.
- J. Tanabe et al., “Fabrication and Test of Prototype Ring Magnets for the ALS”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 566-569.
- M. Otani et al., “Longitudinal Measurements and Beam Tuning in the J-PARC Linac MEBT1”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 968-970.
- M. R. Kraimer, “EPICS: Operating-System-Independent Device/Driver Support”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP582, pp. XX-XX.
- M. Popovic, L. Allen, and C. W. Schmidt, “Fermilab Linac Injector, Revisited”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPA06, pp. 917-919.
- S. Kamada, Y. Kamiya, and M. Kihara, “Lattice of Photon Factory Storage Ring”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3848-3851.
- J. B. Murphy et al., “The Brookhaven Superconducting X-Ray Lithography Source (SXLS)”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1828-1831.
- P. Solans et al., “New 50 KW SSPA Transmitter for the ALBA Booster”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4237-4239.
- J. Schuchman et al., “SXLS Phase II Vacuum System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2316-2319.
- P. S. Martin and D. Wildman, “Bunch Coalescing and Bunch Rotation in the Fermilab Main Ring: Operational Experience and Comparison with Simulations”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 785-788.
- B. Alberdi-Esuain, M. Abo-Bakr, P. Goslawski, S. Joly, and J. Voelker, “Simulated commissioning and lattice robustness studies for BESSY III”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP2035, this conference.
- K. M. Ha and J. Choi, “The Control System Upgrade for the PLS Storage Ring MPSs”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP575, pp. XX-XX.
- M. L. Neubauer, A. Dudas, R. P. Johnson, S. A. Kahn, G. M. Kazakevich, and M. Popovic, “Phase and Frequency Locked 350 MHz Magnetron”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4325-4327.
- S. M. Pruss, “Operational Experience with Collimators in the Tevatron Collider”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3802-3803.
- B. C. Brown, C. M. Ankenbrandt, D. Cosgrove, J. D. Garvey, R. P. Johnson, and K. Meisner, “Design of an Additional Extraction/Injection Area for the Fermilab Booster”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3173-3176.
- M. Popovic, A. Moretti, and R. J. Nobel, “New RF Structures for the Fermilab Linac Injector”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPA07, pp. 920-922.
- Y. Yamazaki et al., “Beam Physics Challenge in FRIB Driver Linac”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP045, pp. 532-534.
- C. Y. Wong et al., “Physics Model of an Allison Phase-Space Scanner, with Application to the FRIB Front End”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 72-76.
- C. M. Bhat et al., “Pbar Acceleration in the MI -- Tune-up Studies Using Protons”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH020, pp. 1705-1707.
Back to search