Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. V. Smith, P. Allison, J. D. Schneider, J. E. Stelzer, C. Geisik, and D. R. Schmitt, “Initial Operation of the CW 8X H- Ion Source Discharge”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3172-3175.
[n] M. Heilmann, H. Podlech, and C. Zhang, “R&D for the Realization of a Very High Frequency Crossbar H-Mode Drift Tube Linac”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 341-344. doi:10.18429/JACoW-LINAC2022-TUPOJO04
[n] L. X. Yan et al., “Ultrashort Electron Bunch Train Production by UV Laser Pulse Stacking”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD051, pp. 3210-3212.
[n] A. V. Aleksandrov, “6D and High Dynamic Range Measurements of Hadron Beam Phase-Space”, presented at the IBIC'23, Saskatoon, Canada, Sep. 2023, paper TH2I01, unpublished.
[n] N. V. Mokhov, “Particle Production and Radiation Environment at a Neutrino Factory Target Station”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAC010, pp. 745-747.
[n] L. H. Yu, “R&D Experiments at BNL to Address the Associated Issues in the Cascading HGHG Scheme”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper MOAIS03, pp. XX-XX.
[n] D. Reschke, “Performance of Superconducting Cavities for the European XFEL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3186-3191. doi:10.18429/JACoW-IPAC2016-THYB01
[n] B. L. Beaudoin et al., “Application of Induction Module for Energy Perturbations in the University of Maryland Electron Ring”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS001, pp. 2322-2324.
[n] V. Ziemann, “Modeling and Tuning the Beam Lines of the Svedberg Laboratory”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP117G, pp. 2480-2481.
[n] D. Wang, “Feasibility Study of Longitudinal Polarization Scheme in the Existing CESR Tunnel”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH123, pp. 3523-3524.
[n] M. Minestrini, “Preliminary Results on Niobium Sputtered Films inside Tesla Type Cavities”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP24, pp. 110-112.
[n] B. E. Bolling and N. Milas, “DC Beam Space-Charge Modeling for OpenXAL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3177-3180. doi:10.18429/JACoW-IPAC2019-WEPTS037
[n] M. Popovic, A. Moretti, and R. J. Nobel, “New RF Structures for the Fermilab Linac Injector”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPA07, pp. 920-922.
For LaTeX
Use Complete Form
For BibTeX
References
- H. V. Smith, P. Allison, J. D. Schneider, J. E. Stelzer, C. Geisik, and D. R. Schmitt, “Initial Operation of the CW 8X H- Ion Source Discharge”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3172-3175.
- M. Heilmann, H. Podlech, and C. Zhang, “R&D for the Realization of a Very High Frequency Crossbar H-Mode Drift Tube Linac”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 341-344.
- L. X. Yan et al., “Ultrashort Electron Bunch Train Production by UV Laser Pulse Stacking”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD051, pp. 3210-3212.
- A. V. Aleksandrov, “6D and High Dynamic Range Measurements of Hadron Beam Phase-Space”, presented at the 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper TH2I01, unpublished.
- N. V. Mokhov, “Particle Production and Radiation Environment at a Neutrino Factory Target Station”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FOAC010, pp. 745-747.
- L. H. Yu, “R&D Experiments at BNL to Address the Associated Issues in the Cascading HGHG Scheme”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper MOAIS03, pp. XX-XX.
- D. Reschke, “Performance of Superconducting Cavities for the European XFEL”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3186-3191.
- B. L. Beaudoin et al., “Application of Induction Module for Energy Perturbations in the University of Maryland Electron Ring”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS001, pp. 2322-2324.
- V. Ziemann, “Modeling and Tuning the Beam Lines of the Svedberg Laboratory”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP117G, pp. 2480-2481.
- D. Wang, “Feasibility Study of Longitudinal Polarization Scheme in the Existing CESR Tunnel”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH123, pp. 3523-3524.
- M. Minestrini, “Preliminary Results on Niobium Sputtered Films inside Tesla Type Cavities”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP24, pp. 110-112.
- B. E. Bolling and N. Milas, “DC Beam Space-Charge Modeling for OpenXAL”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3177-3180.
- M. Popovic, A. Moretti, and R. J. Nobel, “New RF Structures for the Fermilab Linac Injector”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPA07, pp. 920-922.
Back to search
