Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. L. Brown et al., “The STAR Detector Magnet Subsystem”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P002, pp. 3230-3232.
[n] A. Rubini, S. Nellaga, J. D. Gonzalez Cobas, T. Wlostowski, and F. Vaga, “ZIO: The Ultimate Linux I/O Framework”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOMIB09, pp. 77-80.
[n] R. C. Pardo, J. M. Bogaty, and B. E. Clifft, “First Tests of a Traveling-Wave Chopper for the ATLAS Positive Ion Linac”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4101, pp. 995-997.
[n] N. Pupeter, G. Mueller, E. Mahner, A. Matheisen, H. Piel, and D. Proch, “Sputtering of High Quality Niobium Films into 1.5 GHz Monocell Cavities”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2069-2071.
[n] D. Darvas, I. Majzik, and E. Blanco Vinuela, “What is Special About PLC Software Model Checking?”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1781-1786. doi:10.18429/JACoW-ICALEPCS2017-THPHA159
[n] S. Karstensen, M. E. Castro Carballo, J. M. J?ñger, and M. Staack, “XFEL Machine Protection System (MPS) Based on uTCA”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 82-85. doi:10.18429/JACoW-ICALEPCS2015-MOM308
[n] R. Worsham, D. A. Dohan, G. Dutto, K. Fong, R. Poirier, and G. Stanford, “Improved Reliability of the TRIUMF Resonator System through Installation of New Resonator Panels”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I2-07, pp. 353-356.
[n] L. Doolittle, C. C. Lo, M. Monroy, and A. Ratti, “The SNS Front End LLRF System”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU428, pp. 371-373.
[n] M. Peryt and M. Martin Marquez, “FESA 3.0: Overcoming the XML/RDBMS Impedance Mismatch”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP007, pp. 420-422.
[n] S. Fetzko, U. Cummings, and E. Hoyt, “PEP-II Vacuum System - Joining SS Flanges to Copper Beam Chambers”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2497-2500.
[n] A. S. Setty et al., “A New Buncher for the ESRF Linac Injector”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 389-391. doi:10.18429/JACoW-IPAC2016-MOPMW001
[n] S. Zaremba et al., “Beam Dynamics in Newly Designed Cyclotrons at Ion Beam Applications”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1774-1777.
[n] K. Zapfe, U. Hahn, M. Hesse, and H. Remde, “A Cleaning Facility to Prepare Particle Free UHV-components”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP50, pp. 457-460.
[n] F. Amman, E. D. Courant, and A. M. Sessler, “DISCUSSION: Effect of RF Noise on Beam”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 853-854.
[n] T. I. Smith, W. M. Fairbank, H. A. Schwettman, and P. B. Wilson, “Stanford's Superconducting Accelerator Program”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper X-01, pp. 491-493.
[n] M. Bai et al., “Accelerating Polarized Protons to 250 GeV”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUODKI04, pp. 745-747.
[n] S. De Santis, J. M. Byrd, R. B. Wilcox, Y. Yin, and Y. Y. Labs, “Remote Synchrotron Light Instrumentation Using Optical Fibers”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP072, pp. 3609-3611.
[n] J. D. Sherman et al., “Development and Test Results of the Low-Energy Demonstration Accelerator LEDA Proton Injector on a 1.25 MeV CW Radio Frequency Quadrupole”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4054, pp. 890-892.
[n] M. Popovic et al., “Development and Testing of High Power CW 1497 MHz Magnetron”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1351-1353. doi:10.18429/JACoW-IPAC2022-TUPOTK058
[n] T. P. Cleary, “Implementation of the ORIC Magnetic Field Measurements”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3907-3910.
[n] M. S. de Jong et al., “Ferrite-Loaded Higher-Order-Mode Absorbers for the MIT-Bates South Hall Ring”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2016-2019.
[n] Y. Tao and J. Qiang, “A Variable Field Phase-Shifter for Recirculating Proton Linacs”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1072-1074. doi:10.18429/JACoW-IPAC2018-TUPAL032
[n] A. Ghiorso et al., “The Bevalac--An Economical Facility for Very Energetic Heavy Particle Research”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 155-159.
[n] A. Seryi, L. Hendrickson, T. O. Raubenheimer, D. Schulte, P. Tenenbaum, and M. Woodley, “Effects of Dynamic Misalignments and Feedback Performance on Luminosity Stability in Linear Colliders”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROPC004, pp. 662-664.
[n] M. Abs, J. M. Capdevila, T. Delvigne, F. Genin, Y. Jongen, and A. Nguyen, “RHODOTRON Accelerators for Industrial Electron-Beam Processing: A Progress Report”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP076G, pp. 2687-2692.
[n] W. A. Franklin et al., “Optical Stochastic Cooling Experiment at the MIT-Bates South Hall Ring”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper WEM1C02, pp. 117-120.
[n] E. Matias et al., “CLS: A Fully Open-Source Control System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROPA002, pp. 136-139.
[n] N. R. Dean, W. R. Fowkes, M. W. Hoyt, H. D. Schwarz, and E. F. Tillman, “SLAC Linear Collider Waveguide Valve”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1611-1614.
[n] J. Gayde and S. W. Kamugasa, “Evaluation of Frequency Scanning Interferometer Performances for Surveying, Alignment and Monitoring of Physics Instrumentation”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1990-1992. doi:10.18429/JACoW-IPAC2018-WEPAF069
[n] S. Mallon Amerigo, P. Martel, S. Petit, and D. Widegren, “CERN's Global Equipment Data Repository”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUB004, pp. 72-74.
[n] G. Daniluk et al., “Solving Vendor Lock-in in VME Single Board Computers through Open-sourcing of the PCIe-VME64x Bridge”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 131-136. doi:10.18429/JACoW-ICALEPCS2017-TUAPL03
[n] P. Krejcik et al., “Experience with the SLAC Controls Architecture Evolving to the Needs of the LCLS”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP053, pp. XX-XX.
[n] P. B. Wilson, “Prospects for Very High Gradients in Linac-Colliders”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2742-2749.
[n] L. M. Bollinger, “Present and Future Superconducting Linacs”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 233-239.
[n] Y. J. Yuan et al., “Status and Upgrades of HIRFL”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper TUM1I01, pp. 110-114.
[n] R. B. Wilcox, J. M. Byrd, M. S. Zolotorev, and V. E. Scarpine, “A Low-Power Laser Wire with Fiber Optic Distribution”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD53, pp. 425-427.
[n] G. Barak, A. Fisher, H. Ishizuka, and N. Rostoker, “High Current Betatron”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3340-3343.
[n] R. F. Clarke et al., “CLARA Virtual Accelerator”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1926-1929. doi:10.18429/JACoW-ICALEPCS2017-THPHA204
[n] T. Murakami, K. Noda, K. Ohtomo, S. Shibuya, and S. Yamada, “Simulation of Short Bunched and Accelerated Beam by an Un-tuned Cavity”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP5A13, pp. 1540-1542.
[n] H. A. Day, R. M. Jones, M. J. Barnes, F. Caspers, E. M?®tral, and B. Salvant, “Evaluation of the Beam Coupling Impedance of New Beam Screen Designs for the LHC Injection Kicker Magnets”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR071, pp. 3093-3095.
[n] W. J. M. Weterings, M. Aiba, J. Borburgh, C. Carli, T. Fowler, and B. Goddard, “Operational Considerations for the PSB H- Injection System”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP025, pp. 1587-1589.
[n] S. Werin et al., “First Results of Coherent Harmonic Generation at the MAX-Lab Test Fel”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEOA4, pp. 340-343.
[n] W. B. Herrmannsfeldt, “Linac Alignment Techniques”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 9-19.
[n] Y. Tanabe et al., “Evaluation of Magnetic Alloys for JHF RF Cavity ”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D006, pp. 390-392.
[n] Y. Kadi et al., “Progress on the HIE-ISOLDE Facility”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOM1I01, pp. XX-XX.
[n] M. Chowdhary, L. Doolittle, G. Lahti, S. N. Simrock, and R. Terrell, “Automated Frequency Tuning of SRF Cavities at CEBAF”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPR14, pp. 2268-2270.
[n] G. R. White et al., “AIDA, An Architecture for Distributed Accelerator Data at SLAC”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP020, pp. 715-717.
[n] R. L. Ives, W. Lawson, J. Neilson, and M. E. Read, “Design of a 10 MW, 91.392 GHz Gyroklystron for Advanced Accelerators”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3A20, pp. 2081-2083.
[n] M. L. Neubauer et al., “Innovative Magnetron Power Sources for Superconducting RF (SRF) Accelerators”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1348-1350. doi:10.18429/JACoW-IPAC2022-TUPOTK057
[n] S. Rubio-Manrique et al., “Reproduce Anything, Anywhere: A Generic Simulation Suite for Tango Control Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 280-284. doi:10.18429/JACoW-ICALEPCS2017-TUDPL01
[n] V. Bharadwaj, R. Pitthan, J. Sheppard, H. Vincke, and J. W. Wang, “Heat Deposition in Positron Sources for ILC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPP039, pp. 2574-2576.
[n] E. Molina Marinas, A. Guirao, L. M. Martinez Fresno, I. Podadera, V. Villamayor, and A. Marqueta, “Status of the LIPAc MEBT Local Control System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1489-1491. doi:10.18429/JACoW-ICALEPCS2017-THPHA053
[n] Z. R. Wolf, V. Kaplounenko, Yu. I. Levashov, and A. W. Weidemann, “LCLS Undulator Tuning And Fiducialization”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS059, pp. 1320-1322.
[n] W. Beeckman et al., “Status of the Acculinna-2 RIB Fragment Separator”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOA2C03, pp. 33-35.
[n] M. Kondo, “Invited Paper: Recent Developments at the Osaka RCNP 230-cm Cyclotron and a Proposal for a New Ring Accelerator”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper A-06, pp. 1904-1911.
[n] S. Howry, R. Johnson, J. Piccioni, and V. Waithman, “SLAC Control Room Consolidation -- Software Aspects”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 403-405.
[n] F. Amman, “Beam-Beam Limits”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 860-862.
[n] R. M. Jones, P. B. Wilson, and N. M. Kroll, “Loaded Delay Lines for Future R.F. Pulse Compression Systems”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAA33, pp. 2144-2146.
[n] J. S. C. Wills, N. J. Diserens, P. A. Dube, R. Halko, and T. Taylor, “Microwave Driven Negative Ion Sources”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-17, pp. 401-403.
[n] T. Taylor, “A Simple Model of Ion Extraction from a Plasma Source”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-22, pp. 97-99.
[n] M. Izawa et al., “High-Power Conditioning of an RF Cavity for High Brilliant Synchrotron Radiation Source”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP040L, pp. 1988-1990.
[n] S. T. Page and R. Alemany-Fernandez, “An Operational Event Announcer for the LHC Control Centre Using Speech Synthesis”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMN004, pp. 242-245.
[n] F. Zimmermann et al., “Positron Options for the Linac-ring LHeC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR076, pp. 3108-3110.
[n] K. Artoos et al., “Status of the HL-LHC Crab Cavity Tuner”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 646-651. doi:10.18429/JACoW-SRF2019-TUP081
[n] C. Corvin, “Harmonic Resonance Analysis for PEP II Power Factor Correction Upgrades”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P059, pp. 3746-3748.
[n] H. Mainaud Durand et al., “Frequency Scanning Interferometry as New Solution for on-Line Monitoring Inside a Cryostat for the HL-LHC project”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1986-1989. doi:10.18429/JACoW-IPAC2018-WEPAF068
[n] C. Jamet and E. Petit, “Beam Current Measurements with Logarithmic Converter”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper B-40, pp. 297-300.
[n] Z. D. Farkas, H. A. Hogg, G. A. Loew, and P. B. Wilson, “Recent Progress on Sled, The SLAC Energy Doubler”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1299-1303.
[n] N. Pupeter et al., “Influence of Surface Roughness and Preparation, Bulk Purity and Heat Treatment on Electron Field Emission from Nb and Nb3Sn”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95B01, pp. 67-77.
[n] L. Serio, A. Castellano, U. Gentile, F. Antonello, P. Baraldi, and E. Zio, “A Smart Framework for the Availability and Reliability Assessment and Management of Accelerators Technical Facilities”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2024-2027. doi:10.18429/JACoW-IPAC2018-WEPAF079
[n] H. Mainaud Durand, J. Gayde, J. Jaros, M. Sosin, A. P. Zemanek, and V. Rude, “The New CLIC Main Linac Installation and Alignment Strategy”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1979-1982. doi:10.18429/JACoW-IPAC2018-WEPAF066
[n] S. Schaffner et al., “Device Control at CEBAF”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPR13, pp. 2265-2267.
[n] K.-J. Kim et al., “Requirements and Design of a Highly Stable Infrared Free Electron Laser at LBL”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 559-562.
[n] J. B. Rosenzweig et al., “RF and Magnetic Measurements on the SPARC Photoinjector and Solenoid at UCLA”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE040, pp. 2624-2626.
[n] A. D. McInturff, P. F. Dahl, R. Damm, K. E. Robins, and W. B. Sampson, “Prototype and Proposed ISABELLE" Dipoles"”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1242-1245.
[n] H. Kim, F. Crosby, J. Fugitt, and R. Johnson, “A Unique Space Saving Accelerator Cavity Design”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2818-2821.
[n] S. Nyckees et al., “A New BETSI Test Bench at CEA/Saclay”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper TUPOT003, pp. 117-119.
[n] K. Halbach, “Magnet Innovations for Linacs”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH2-1, pp. 407-410.
[n] J. Allinger, G. Danby, J. Jackson, and A. Prodell, “High Precision Superconducting Magnets”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1299-1303.
[n] R. Fielder, D. Rabusov, and S. Wang, “Updates to the impedance database for the Diamond-II storage ring”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3112-3115. doi:10.18429/JACoW-IPAC2024-THPC50
[n] T. Taylor, M. de Jong, and W. Michel, “An Emittance Measuring System for High-Current High-Brightness Multi-Beamlet Multi-Species Heavy-Ion Beams”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-23, pp. 100-102.
[n] S. M. Pattalwar, R. Bate, G. Cox, P. A. McIntosh, and A. Oates, “Instrumentation and Control System for the International ERL Cryomodule”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO053, pp. 710-714.
[n] L. Li, W. Chen, G. Ni, and X. J. Sun, “Rotating Coil Magnetic Measurement System and Measurement Results of Quadrupole Prototype for BEPCII Storage Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT024, pp. 1844-1846.
[n] M. Loiselet et al., “Invited Paper: Production and Acceleration of Radioactive Beams at Louvain-la-Neuve”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper M-01, pp. 629-633.
[n] G. Maire, A. Kehrli, S. Ravat, and H. Coppier, “The Detector Safety System of NA62 Experiment”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC056, pp. 222-225.
[n] T. Rizawa, M. Nakano, K. Satoh, Y. Satoh, and Y. Tanabe, “R. F. Characteristics of 508 MHz Slot-Coupled Mulit-Cell Cavity”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 916-919.
[n] A. Fabris et al., “Progress of the S-Band RF Systems of the FERMI@Elettra Linac”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP022, pp. 2039-2041.
[n] D. Fryberger and R. Johnson, “An Innovation in Control Panels for Large Computer Control Systems”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 414-418.
[n] A. Perin, S. D. Claudet, and R. van Weelderen, “Operational Experience with the LHC Superconducting Links and Evaluation of Possible Cryogenic Schemes for Future Remote Powering of Superconducting Magnets”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA073, pp. 3840-3842.
[n] C. Boucly, J. Borburgh, C. Bracco, E. Carlier, N. Magnin, and N. Voumard, “Operational Experience with a PLC Based Positioning System for a LHC Extraction Protection Element”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC068, pp. 254-257.
[n] D. Rogind et al., “Integrated Management Tool for Controls Software Problems, Requests and Project Tasking at SLAC”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOMAU008, pp. 59-62.
[n] J. Campmany, F. Becheri, J. Marcos, V. Massana, R. Petrocelli, and L. Ribo, “Upgrade of Magnetic Measurements Laboratory at ALBA Synchrotron”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 211-213. doi:10.18429/JACoW-MEDSI2018-WEPH06
[n] G. Travish, G. Andonian, P. Frigola, S. Reiche, J. B. Rosenzweig, and S. Telfer, “The UCLA Pegasus Plane-Wave Transformer Photoinjector”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB031, pp. 2112-2113.
[n] A. V. Fedotov et al., “Electron Cooling for the Low-Energy RHIC Program”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper MOM2MCIO01, pp. 11-15.
[n] B. G?Ñlnander, M. Collins, M. Eshraqi, A. Farricker, C. A. Martins, and R. Miyamoto, “Status of ESS Linac Upgrade Studies for ESSnuSB”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1038-1041. doi:10.18429/JACoW-IPAC2019-MOPTS082
[n] D. B. Shwartz et al., “New Quadrupoles Installed at VEPP-2000 for High Energy Operation Without Final Focus”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 319-322. doi:10.18429/JACoW-RUPAC2018-WEPSB17
[n] Y. K. Wu et al., “Improving Power Supply Performance for Duke Storage Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPE007, pp. 752-754.
[n] P. A. Corlett and J. H. P. Rogers, “ERLP Quantum Efficiency Scanner”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH165, pp. 3179-3181.
[n] S. Prestemon, D. R. Dietderich, A. Madur, S. Marks, and D. Schlueter, “High Performance Short-Period Undulators Using High Temperature Superconductor Tapes”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP075, pp. 2438-2440.
[n] A. Braido et al., “Improving the phase stability of the 201.25 MHz BPPM reference for the LANSCE 805 MHz LINAC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4779-4782. doi:10.18429/JACoW-IPAC2023-THPL132
[n] Z. D. Farkas and P. B. Wilson, “Comparison of High Group Velocity Structures”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1561-1564.
[n] S. Ravat, L. Deront, A. Kehrli, and X. Pons, “A Safety System for Experimental Magnets Based on CompactRIO”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC053, pp. 210-213.
[n] A. Lehrach et al., “Establishing a new class of high-current accelerator-driven neutron sources with the HBS Project”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 129-132. doi:10.18429/JACoW-IPAC2024-MOPC31
[n] O. V. Singh and R. J. Nawrocky, “Upgrade of Beam Steering System Components and Controls for the NSLS Storage Rings”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1902-1905.
[n] R. Hettel et al., “SPEAR 3 Upgrade Project: The Final Year”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOPA005, pp. 235-237.
[n] K. Fukami et al., “Novel iron lamination for fast kicker magnets with high flux density”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2631-2634. doi:10.18429/JACoW-IPAC2023-WEODC2
[n] V. Kamerdzhiev et al., “Nondestructive Beam Instrumentation and Electron Cooling Beam Studies at COSY”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD093, pp. 921-923.
[n] T. Srinivasan-Rao et al., “Simulation, Generation, and Characterization of High Brightness Electron Source at 1 GV/m Gradient”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOCR3, pp. 75-77.
[n] A. Ratti et al., “The Design and Performance of the Spallation Neutron Source Low-Level RF Control System”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP44, pp. 703-705.
[n] C. Roderick, R. Billen, M. Gourber-Pace, N. Hoibian, and M. Peryt, “The CERN Accelerator Measurement Database: On the Road to Federation”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN009, pp. 102-105.
[n] M. Xu et al., “CiADS and HIAF Superconducting Cavity Development Status and the Transition to Production Stage”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 273. doi:10.18429/JACoW-SRF2021-MOPCAV008
[n] N. Cutic, C. Erny, F. Lindau, S. Thorin, and S. Werin, “An Electro-optical System for MAX-lab Test-FEL Facility”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC79, pp. 685-687.
For LaTeX
Use Complete Form
For BibTeX
References
- R. L. Brown et al., “The STAR Detector Magnet Subsystem”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P002, pp. 3230-3232.
- A. Rubini, S. Nellaga, J. D. Gonzalez Cobas, T. Wlostowski, and F. Vaga, “ZIO: The Ultimate Linux I/O Framework”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOMIB09, pp. 77-80.
- R. C. Pardo, J. M. Bogaty, and B. E. Clifft, “First Tests of a Traveling-Wave Chopper for the ATLAS Positive Ion Linac”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4101, pp. 995-997.
- N. Pupeter, G. Mueller, E. Mahner, A. Matheisen, H. Piel, and D. Proch, “Sputtering of High Quality Niobium Films into 1.5 GHz Monocell Cavities”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2069-2071.
- D. Darvas, I. Majzik, and E. Blanco Vinuela, “What is Special About PLC Software Model Checking?”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1781-1786.
- S. Karstensen, M. E. Castro Carballo, J. M. J?ñger, and M. Staack, “XFEL Machine Protection System (MPS) Based on uTCA”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 82-85.
- R. Worsham, D. A. Dohan, G. Dutto, K. Fong, R. Poirier, and G. Stanford, “Improved Reliability of the TRIUMF Resonator System through Installation of New Resonator Panels”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I2-07, pp. 353-356.
- L. Doolittle, C. C. Lo, M. Monroy, and A. Ratti, “The SNS Front End LLRF System”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU428, pp. 371-373.
- M. Peryt and M. Martin Marquez, “FESA 3.0: Overcoming the XML/RDBMS Impedance Mismatch”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP007, pp. 420-422.
- S. Fetzko, U. Cummings, and E. Hoyt, “PEP-II Vacuum System - Joining SS Flanges to Copper Beam Chambers”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2497-2500.
- A. S. Setty et al., “A New Buncher for the ESRF Linac Injector”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 389-391.
- S. Zaremba et al., “Beam Dynamics in Newly Designed Cyclotrons at Ion Beam Applications”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1774-1777.
- K. Zapfe, U. Hahn, M. Hesse, and H. Remde, “A Cleaning Facility to Prepare Particle Free UHV-components”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP50, pp. 457-460.
- F. Amman, E. D. Courant, and A. M. Sessler, “DISCUSSION: Effect of RF Noise on Beam”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 853-854.
- T. I. Smith, W. M. Fairbank, H. A. Schwettman, and P. B. Wilson, “Stanford's Superconducting Accelerator Program”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper X-01, pp. 491-493.
- M. Bai et al., “Accelerating Polarized Protons to 250 GeV”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUODKI04, pp. 745-747.
- S. De Santis, J. M. Byrd, R. B. Wilcox, Y. Yin, and Y. Y. Labs, “Remote Synchrotron Light Instrumentation Using Optical Fibers”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP072, pp. 3609-3611.
- J. D. Sherman et al., “Development and Test Results of the Low-Energy Demonstration Accelerator LEDA Proton Injector on a 1.25 MeV CW Radio Frequency Quadrupole”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4054, pp. 890-892.
- M. Popovic et al., “Development and Testing of High Power CW 1497 MHz Magnetron”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1351-1353.
- T. P. Cleary, “Implementation of the ORIC Magnetic Field Measurements”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3907-3910.
- M. S. de Jong et al., “Ferrite-Loaded Higher-Order-Mode Absorbers for the MIT-Bates South Hall Ring”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2016-2019.
- Y. Tao and J. Qiang, “A Variable Field Phase-Shifter for Recirculating Proton Linacs”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1072-1074.
- A. Ghiorso et al., “The Bevalac--An Economical Facility for Very Energetic Heavy Particle Research”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 155-159.
- A. Seryi, L. Hendrickson, T. O. Raubenheimer, D. Schulte, P. Tenenbaum, and M. Woodley, “Effects of Dynamic Misalignments and Feedback Performance on Luminosity Stability in Linear Colliders”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROPC004, pp. 662-664.
- M. Abs, J. M. Capdevila, T. Delvigne, F. Genin, Y. Jongen, and A. Nguyen, “RHODOTRON Accelerators for Industrial Electron-Beam Processing: A Progress Report”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP076G, pp. 2687-2692.
- W. A. Franklin et al., “Optical Stochastic Cooling Experiment at the MIT-Bates South Hall Ring”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper WEM1C02, pp. 117-120.
- E. Matias et al., “CLS: A Fully Open-Source Control System”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROPA002, pp. 136-139.
- N. R. Dean, W. R. Fowkes, M. W. Hoyt, H. D. Schwarz, and E. F. Tillman, “SLAC Linear Collider Waveguide Valve”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1611-1614.
- J. Gayde and S. W. Kamugasa, “Evaluation of Frequency Scanning Interferometer Performances for Surveying, Alignment and Monitoring of Physics Instrumentation”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1990-1992.
- S. Mallon Amerigo, P. Martel, S. Petit, and D. Widegren, “CERN's Global Equipment Data Repository”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUB004, pp. 72-74.
- G. Daniluk et al., “Solving Vendor Lock-in in VME Single Board Computers through Open-sourcing of the PCIe-VME64x Bridge”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 131-136.
- P. Krejcik et al., “Experience with the SLAC Controls Architecture Evolving to the Needs of the LCLS”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP053, pp. XX-XX.
- P. B. Wilson, “Prospects for Very High Gradients in Linac-Colliders”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2742-2749.
- L. M. Bollinger, “Present and Future Superconducting Linacs”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 233-239.
- Y. J. Yuan et al., “Status and Upgrades of HIRFL”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper TUM1I01, pp. 110-114.
- R. B. Wilcox, J. M. Byrd, M. S. Zolotorev, and V. E. Scarpine, “A Low-Power Laser Wire with Fiber Optic Distribution”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD53, pp. 425-427.
- G. Barak, A. Fisher, H. Ishizuka, and N. Rostoker, “High Current Betatron”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3340-3343.
- R. F. Clarke et al., “CLARA Virtual Accelerator”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1926-1929.
- T. Murakami, K. Noda, K. Ohtomo, S. Shibuya, and S. Yamada, “Simulation of Short Bunched and Accelerated Beam by an Un-tuned Cavity”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP5A13, pp. 1540-1542.
- H. A. Day, R. M. Jones, M. J. Barnes, F. Caspers, E. M?®tral, and B. Salvant, “Evaluation of the Beam Coupling Impedance of New Beam Screen Designs for the LHC Injection Kicker Magnets”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR071, pp. 3093-3095.
- W. J. M. Weterings, M. Aiba, J. Borburgh, C. Carli, T. Fowler, and B. Goddard, “Operational Considerations for the PSB H- Injection System”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP025, pp. 1587-1589.
- S. Werin et al., “First Results of Coherent Harmonic Generation at the MAX-Lab Test Fel”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEOA4, pp. 340-343.
- W. B. Herrmannsfeldt, “Linac Alignment Techniques”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 9-19.
- Y. Tanabe et al., “Evaluation of Magnetic Alloys for JHF RF Cavity ”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D006, pp. 390-392.
- Y. Kadi et al., “Progress on the HIE-ISOLDE Facility”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper MOM1I01, pp. XX-XX.
- M. Chowdhary, L. Doolittle, G. Lahti, S. N. Simrock, and R. Terrell, “Automated Frequency Tuning of SRF Cavities at CEBAF”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPR14, pp. 2268-2270.
- G. R. White et al., “AIDA, An Architecture for Distributed Accelerator Data at SLAC”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP020, pp. 715-717.
- R. L. Ives, W. Lawson, J. Neilson, and M. E. Read, “Design of a 10 MW, 91.392 GHz Gyroklystron for Advanced Accelerators”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP3A20, pp. 2081-2083.
- M. L. Neubauer et al., “Innovative Magnetron Power Sources for Superconducting RF (SRF) Accelerators”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1348-1350.
- S. Rubio-Manrique et al., “Reproduce Anything, Anywhere: A Generic Simulation Suite for Tango Control Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 280-284.
- V. Bharadwaj, R. Pitthan, J. Sheppard, H. Vincke, and J. W. Wang, “Heat Deposition in Positron Sources for ILC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPP039, pp. 2574-2576.
- E. Molina Marinas, A. Guirao, L. M. Martinez Fresno, I. Podadera, V. Villamayor, and A. Marqueta, “Status of the LIPAc MEBT Local Control System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1489-1491.
- Z. R. Wolf, V. Kaplounenko, Yu. I. Levashov, and A. W. Weidemann, “LCLS Undulator Tuning And Fiducialization”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMS059, pp. 1320-1322.
- W. Beeckman et al., “Status of the Acculinna-2 RIB Fragment Separator”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper MOA2C03, pp. 33-35.
- M. Kondo, “Invited Paper: Recent Developments at the Osaka RCNP 230-cm Cyclotron and a Proposal for a New Ring Accelerator”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper A-06, pp. 1904-1911.
- S. Howry, R. Johnson, J. Piccioni, and V. Waithman, “SLAC Control Room Consolidation -- Software Aspects”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 403-405.
- F. Amman, “Beam-Beam Limits”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 860-862.
- R. M. Jones, P. B. Wilson, and N. M. Kroll, “Loaded Delay Lines for Future R.F. Pulse Compression Systems”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAA33, pp. 2144-2146.
- J. S. C. Wills, N. J. Diserens, P. A. Dube, R. Halko, and T. Taylor, “Microwave Driven Negative Ion Sources”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-17, pp. 401-403.
- T. Taylor, “A Simple Model of Ion Extraction from a Plasma Source”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-22, pp. 97-99.
- M. Izawa et al., “High-Power Conditioning of an RF Cavity for High Brilliant Synchrotron Radiation Source”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP040L, pp. 1988-1990.
- S. T. Page and R. Alemany-Fernandez, “An Operational Event Announcer for the LHC Control Centre Using Speech Synthesis”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMN004, pp. 242-245.
- F. Zimmermann et al., “Positron Options for the Linac-ring LHeC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR076, pp. 3108-3110.
- K. Artoos et al., “Status of the HL-LHC Crab Cavity Tuner”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 646-651.
- C. Corvin, “Harmonic Resonance Analysis for PEP II Power Factor Correction Upgrades”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P059, pp. 3746-3748.
- H. Mainaud Durand et al., “Frequency Scanning Interferometry as New Solution for on-Line Monitoring Inside a Cryostat for the HL-LHC project”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1986-1989.
- C. Jamet and E. Petit, “Beam Current Measurements with Logarithmic Converter”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper B-40, pp. 297-300.
- Z. D. Farkas, H. A. Hogg, G. A. Loew, and P. B. Wilson, “Recent Progress on Sled, The SLAC Energy Doubler”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1299-1303.
- N. Pupeter et al., “Influence of Surface Roughness and Preparation, Bulk Purity and Heat Treatment on Electron Field Emission from Nb and Nb3Sn”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95B01, pp. 67-77.
- L. Serio, A. Castellano, U. Gentile, F. Antonello, P. Baraldi, and E. Zio, “A Smart Framework for the Availability and Reliability Assessment and Management of Accelerators Technical Facilities”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2024-2027.
- H. Mainaud Durand, J. Gayde, J. Jaros, M. Sosin, A. P. Zemanek, and V. Rude, “The New CLIC Main Linac Installation and Alignment Strategy”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1979-1982.
- S. Schaffner et al., “Device Control at CEBAF”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPR13, pp. 2265-2267.
- K.-J. Kim et al., “Requirements and Design of a Highly Stable Infrared Free Electron Laser at LBL”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 559-562.
- J. B. Rosenzweig et al., “RF and Magnetic Measurements on the SPARC Photoinjector and Solenoid at UCLA”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE040, pp. 2624-2626.
- A. D. McInturff, P. F. Dahl, R. Damm, K. E. Robins, and W. B. Sampson, “Prototype and Proposed ISABELLE" Dipoles"”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1242-1245.
- H. Kim, F. Crosby, J. Fugitt, and R. Johnson, “A Unique Space Saving Accelerator Cavity Design”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2818-2821.
- S. Nyckees et al., “A New BETSI Test Bench at CEA/Saclay”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper TUPOT003, pp. 117-119.
- K. Halbach, “Magnet Innovations for Linacs”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH2-1, pp. 407-410.
- J. Allinger, G. Danby, J. Jackson, and A. Prodell, “High Precision Superconducting Magnets”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1299-1303.
- R. Fielder, D. Rabusov, and S. Wang, “Updates to the impedance database for the Diamond-II storage ring”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC50, pp. 3112-3115.
- T. Taylor, M. de Jong, and W. Michel, “An Emittance Measuring System for High-Current High-Brightness Multi-Beamlet Multi-Species Heavy-Ion Beams”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-23, pp. 100-102.
- S. M. Pattalwar, R. Bate, G. Cox, P. A. McIntosh, and A. Oates, “Instrumentation and Control System for the International ERL Cryomodule”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO053, pp. 710-714.
- L. Li, W. Chen, G. Ni, and X. J. Sun, “Rotating Coil Magnetic Measurement System and Measurement Results of Quadrupole Prototype for BEPCII Storage Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT024, pp. 1844-1846.
- M. Loiselet et al., “Invited Paper: Production and Acceleration of Radioactive Beams at Louvain-la-Neuve”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper M-01, pp. 629-633.
- G. Maire, A. Kehrli, S. Ravat, and H. Coppier, “The Detector Safety System of NA62 Experiment”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC056, pp. 222-225.
- T. Rizawa, M. Nakano, K. Satoh, Y. Satoh, and Y. Tanabe, “R. F. Characteristics of 508 MHz Slot-Coupled Mulit-Cell Cavity”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 916-919.
- A. Fabris et al., “Progress of the S-Band RF Systems of the FERMI@Elettra Linac”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP022, pp. 2039-2041.
- D. Fryberger and R. Johnson, “An Innovation in Control Panels for Large Computer Control Systems”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 414-418.
- A. Perin, S. D. Claudet, and R. van Weelderen, “Operational Experience with the LHC Superconducting Links and Evaluation of Possible Cryogenic Schemes for Future Remote Powering of Superconducting Magnets”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA073, pp. 3840-3842.
- C. Boucly, J. Borburgh, C. Bracco, E. Carlier, N. Magnin, and N. Voumard, “Operational Experience with a PLC Based Positioning System for a LHC Extraction Protection Element”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC068, pp. 254-257.
- D. Rogind et al., “Integrated Management Tool for Controls Software Problems, Requests and Project Tasking at SLAC”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOMAU008, pp. 59-62.
- J. Campmany, F. Becheri, J. Marcos, V. Massana, R. Petrocelli, and L. Ribo, “Upgrade of Magnetic Measurements Laboratory at ALBA Synchrotron”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 211-213.
- G. Travish, G. Andonian, P. Frigola, S. Reiche, J. B. Rosenzweig, and S. Telfer, “The UCLA Pegasus Plane-Wave Transformer Photoinjector”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB031, pp. 2112-2113.
- A. V. Fedotov et al., “Electron Cooling for the Low-Energy RHIC Program”, in Proc. 7th Workshop on Beam Cooling and Related Topics (COOL'09), Lanzhou, China, Aug.-Sep. 2009, paper MOM2MCIO01, pp. 11-15.
- B. G?Ñlnander, M. Collins, M. Eshraqi, A. Farricker, C. A. Martins, and R. Miyamoto, “Status of ESS Linac Upgrade Studies for ESSnuSB”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1038-1041.
- D. B. Shwartz et al., “New Quadrupoles Installed at VEPP-2000 for High Energy Operation Without Final Focus”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 319-322.
- Y. K. Wu et al., “Improving Power Supply Performance for Duke Storage Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPE007, pp. 752-754.
- P. A. Corlett and J. H. P. Rogers, “ERLP Quantum Efficiency Scanner”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH165, pp. 3179-3181.
- S. Prestemon, D. R. Dietderich, A. Madur, S. Marks, and D. Schlueter, “High Performance Short-Period Undulators Using High Temperature Superconductor Tapes”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP075, pp. 2438-2440.
- A. Braido et al., “Improving the phase stability of the 201.25 MHz BPPM reference for the LANSCE 805 MHz LINAC”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL132, pp. 4779-4782.
- Z. D. Farkas and P. B. Wilson, “Comparison of High Group Velocity Structures”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1561-1564.
- S. Ravat, L. Deront, A. Kehrli, and X. Pons, “A Safety System for Experimental Magnets Based on CompactRIO”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC053, pp. 210-213.
- A. Lehrach et al., “Establishing a new class of high-current accelerator-driven neutron sources with the HBS Project”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPC31, pp. 129-132.
- O. V. Singh and R. J. Nawrocky, “Upgrade of Beam Steering System Components and Controls for the NSLS Storage Rings”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1902-1905.
- R. Hettel et al., “SPEAR 3 Upgrade Project: The Final Year”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOPA005, pp. 235-237.
- K. Fukami et al., “Novel iron lamination for fast kicker magnets with high flux density”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEODC2, pp. 2631-2634.
- V. Kamerdzhiev et al., “Nondestructive Beam Instrumentation and Electron Cooling Beam Studies at COSY”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD093, pp. 921-923.
- T. Srinivasan-Rao et al., “Simulation, Generation, and Characterization of High Brightness Electron Source at 1 GV/m Gradient”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOCR3, pp. 75-77.
- A. Ratti et al., “The Design and Performance of the Spallation Neutron Source Low-Level RF Control System”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP44, pp. 703-705.
- C. Roderick, R. Billen, M. Gourber-Pace, N. Hoibian, and M. Peryt, “The CERN Accelerator Measurement Database: On the Road to Federation”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKN009, pp. 102-105.
- M. Xu et al., “CiADS and HIAF Superconducting Cavity Development Status and the Transition to Production Stage”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 273.
- N. Cutic, C. Erny, F. Lindau, S. Thorin, and S. Werin, “An Electro-optical System for MAX-lab Test-FEL Facility”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper WEPC79, pp. 685-687.
Back to search