Favourites
For Word
[n] G. Romagnoli et al., “Design of the New PS Internal Dumps, in the Framework of the LHC Injector Upgrade (LIU) Project”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3521-3523. doi:10.18429/JACoW-IPAC2017-WEPVA109
[n] P. Korysko, P. Burrows, A. Faus-Golfe, K. Kubo, A. Latina, and T. Okugi, “Intensity Dependent Effects at ATF2, KEK”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 308-311. doi:10.18429/JACoW-IPAC2019-MOPGW086
[n] M. A. Allen and R. A. McConnell, “RF Systems for SLAC Storage Ring”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 253-255.
[n] A. Kanareykin et al., “Simulations and Measurements of Beam Breakup in Dielectric Wakefield Structures”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC081, pp. 1904-1906.
[n] S. Kondrashev and B. Sharkov, “Matching of the Intensive Laser Ion Source to the RFQ Accelerators”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP050L, pp. 1550-1552.
[n] F. J. Decker, D. Farkas, L. Rinolfi, and J. Truher, “Reducing Energy Spread for Long Bunch Train at SLAC”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP124G, pp. 828-830.
[n] A. Balabaev et al., “Laser Source of Highly-Charged Ions for ITEP TeraWatt Accumulator Facility”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP3A01, pp. 551-553.
[n] A. Altmark and A. Kanareykin, “Beam Dynamics Calculation of Electron Bunch Sequence Passing Through Dielectric”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 402-404. doi:10.18429/JACoW-RUPAC2016-WEPSB018
[n] N. Baboi et al., “Beam Position Monitor Calibration at the FLASH Linac at DESY”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN017, pp. 3937-3939.
[n] H. L. Andrews et al., “Experimental Observation of the Evanescent Wave in a Smith-Purcell Free-Electron Laser”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOPPH047, pp. 83-86.
[n] M. Fedorov et al., “In-Place Technology Replacement of a 24x7 Operational Facility: Key Lessons Learned and Success Strategies From the NIF Control System Modernization”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 949. doi:10.18429/JACoW-ICALEPCS2019-WEDPL01
[n] P. Korysko, P. Burrows, and A. Latina, “Intensity Dependent Effects in the ILC BDS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 305-307. doi:10.18429/JACoW-IPAC2019-MOPGW085
[n] R. G. Marathe, V. Bhatnagar, P. Fatnani, R. K. Gupta, G. Singh, and D. S. Thakur, “Radiation Safety System for INDUS Accelerator Complex”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA032, pp. 148-150.
[n] W. Herr, R. Lauckner, and G. Morpurgo, “The RTC - A Software Support System for the Control of the CERN SPS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1678-1681.
[n] J.-P. Delahaye et al., “A Staged Muon Accelerator Facility for Neutrino and Collider Physics”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1872-1876. doi:10.18429/JACoW-IPAC2014-WEZA02
[n] M. Reiser, D. Kehne, K. Low, J. McAdoo, and T. Shea, “Study of Misalignment Effects in Electron Beam Transport Through a Periodic Solenoid Channel”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1135-1138.
[n] J. F. Gournay, F. Garreau, A. Giraud, G. Gourcy, and J. Rouault, “The New Control System of the Saclay Linear Accelerator”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2026-2029.
[n] I. Lamas Garcia et al., “LHC Injection Protection Devices, Thermo-mechanical Studies through the Design Phase”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3698-3701. doi:10.18429/JACoW-IPAC2016-THPMY019
[n] A. E. Vlieks et al., “High Power Window Tests at SLAC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH073, pp. 942-944.
[n] E. Bouquerel et al., “Design of a Beamline From a TR24 Cyclotron for Biological Tissues Irradiation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 564-566. doi:10.18429/JACoW-IPAC2017-MOPIK030
[n] P. J. Viccaro, D. W. Carnegie, and R. Savoy, “Magnetic Field Tolerances for Insertion Devices on Third Generation Sychrotron Light Sources”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1091-1096.
[n] S. Reimann, M. Droba, O. Meusel, and H. Podlech, “An Algorithm for Automated Lattice Design of Transfer Lines”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 127-130. doi:10.18429/JACoW-IPAC2019-MOPGW023
[n] J. J. Pon, K. S. Lee, M. Mouat, T. Planche, and P. J. Yogendran, “Stabilizing the Beam Current Split Ratio in TRIUMF's 500 MeV Cyclotron with High Level, Closed-Loop Feedback Software”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC136, pp. 1370-1372.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Romagnoli et al., “Design of the New PS Internal Dumps, in the Framework of the LHC Injector Upgrade (LIU) Project”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3521-3523.
- P. Korysko, P. Burrows, A. Faus-Golfe, K. Kubo, A. Latina, and T. Okugi, “Intensity Dependent Effects at ATF2, KEK”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 308-311.
- M. A. Allen and R. A. McConnell, “RF Systems for SLAC Storage Ring”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 253-255.
- A. Kanareykin et al., “Simulations and Measurements of Beam Breakup in Dielectric Wakefield Structures”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC081, pp. 1904-1906.
- S. Kondrashev and B. Sharkov, “Matching of the Intensive Laser Ion Source to the RFQ Accelerators”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP050L, pp. 1550-1552.
- F. J. Decker, D. Farkas, L. Rinolfi, and J. Truher, “Reducing Energy Spread for Long Bunch Train at SLAC”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP124G, pp. 828-830.
- A. Balabaev et al., “Laser Source of Highly-Charged Ions for ITEP TeraWatt Accumulator Facility”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP3A01, pp. 551-553.
- A. Altmark and A. Kanareykin, “Beam Dynamics Calculation of Electron Bunch Sequence Passing Through Dielectric”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 402-404.
- N. Baboi et al., “Beam Position Monitor Calibration at the FLASH Linac at DESY”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN017, pp. 3937-3939.
- H. L. Andrews et al., “Experimental Observation of the Evanescent Wave in a Smith-Purcell Free-Electron Laser”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper MOPPH047, pp. 83-86.
- M. Fedorov et al., “In-Place Technology Replacement of a 24x7 Operational Facility: Key Lessons Learned and Success Strategies From the NIF Control System Modernization”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 949.
- P. Korysko, P. Burrows, and A. Latina, “Intensity Dependent Effects in the ILC BDS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 305-307.
- R. G. Marathe, V. Bhatnagar, P. Fatnani, R. K. Gupta, G. Singh, and D. S. Thakur, “Radiation Safety System for INDUS Accelerator Complex”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA032, pp. 148-150.
- W. Herr, R. Lauckner, and G. Morpurgo, “The RTC - A Software Support System for the Control of the CERN SPS”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1678-1681.
- J.-P. Delahaye et al., “A Staged Muon Accelerator Facility for Neutrino and Collider Physics”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1872-1876.
- M. Reiser, D. Kehne, K. Low, J. McAdoo, and T. Shea, “Study of Misalignment Effects in Electron Beam Transport Through a Periodic Solenoid Channel”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1135-1138.
- J. F. Gournay, F. Garreau, A. Giraud, G. Gourcy, and J. Rouault, “The New Control System of the Saclay Linear Accelerator”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2026-2029.
- I. Lamas Garcia et al., “LHC Injection Protection Devices, Thermo-mechanical Studies through the Design Phase”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3698-3701.
- A. E. Vlieks et al., “High Power Window Tests at SLAC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH073, pp. 942-944.
- E. Bouquerel et al., “Design of a Beamline From a TR24 Cyclotron for Biological Tissues Irradiation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 564-566.
- P. J. Viccaro, D. W. Carnegie, and R. Savoy, “Magnetic Field Tolerances for Insertion Devices on Third Generation Sychrotron Light Sources”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1091-1096.
- S. Reimann, M. Droba, O. Meusel, and H. Podlech, “An Algorithm for Automated Lattice Design of Transfer Lines”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 127-130.
- J. J. Pon, K. S. Lee, M. Mouat, T. Planche, and P. J. Yogendran, “Stabilizing the Beam Current Split Ratio in TRIUMF's 500 MeV Cyclotron with High Level, Closed-Loop Feedback Software”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC136, pp. 1370-1372.
Back to search