Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Z. Zhou, “Conception design for high-resolution reconstruction of fault occurrence”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPL023, unpublished.
[n] S. Kurokawa, “Status of TRISTAN-II Project”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2004-2007.
[n] Peng Zhao-hua, “THERMAL CALCULATION AND DESIGN OF THE RFQ CAVITY”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THP082, pp. XX-XX.
[n] G. Knap, T. M. Cobb, Y. Moazzam, U. K. Pedersen, and C. J. Reynolds, “Kubernetes for EPICS IOCs”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 835-838. doi:10.18429/JACoW-ICALEPCS2021-THBL04
[n] Xiongwei Zhu, Kazuhisa Nakajima, “BEAM DYNAMICS SIMULATION OF W-BAND PHOTOINJECTOR”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP077, pp. XX-XX.
[n] N. Xie, Y. H. Guo, B. J. Wang, and R. Wang, “Design of Real-Time Alarm System for CAFe”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 867-870. doi:10.18429/JACoW-ICALEPCS2021-THPV006
[n] T. G. Primidis, V. Soloviev, S. G. Wells, and C. P. Welsch, “Design and Optimisation of a Stationary Chest Tomosynthesis System with Multiple Flat Panel Field Emitter Arrays: Monte Carlo Simulations and Computer Aided Designs”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 3034-3037. doi:10.18429/JACoW-IPAC2022-THPOMS033
[n] Min-joon Park, Han-sung Kim, Moon-sung Chun, Kie-hyung Chung, Hyeok-jung Kwon, Kang-ok Lee, “ERROR ANALYSIS AND FABRICATION OF THE PROTOTYPE BENDING MAGNET FOR THE FANTRON-I”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP057, pp. XX-XX.
[n] P. D. Hermes et al., “A Novel Tool for Beam Dynamics Studies with Hollow Electron Lenses”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 176-179. doi:10.18429/JACoW-IPAC2022-MOPOST045
[n] S. Di Mitri, “On the production of short X-ray pulses at diffraction-limited light sources, an update and recent developments”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOZN2, unpublished.
[n] L. Pranovi and M. Montis, “Integrating EPICS Control System in VR Environment: Proof of Concept”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 599-601. doi:10.18429/JACoW-ICALEPCS2023-TUPDP039
[n] K. Brown and S. Biedron, “Summary of the 3rd ICFA Beam Dynamics Mini-Workshop on Machine Learning Applications for Particle Accelerators”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4440-4443. doi:10.18429/JACoW-IPAC2023-THPL010
[n] S. Yates and C. Howell, “Measurement of the 80Se(γ,n) reaction with linearly polarized γ rays”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPM137, unpublished.
[n] A. H. Ninane, J. L. Martou, M. Nemry, and F. Somers, “A VMEbus General-Purpose Data Acquisition System”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 265-268. doi:10.18429/JACoW-ICALEPCS1991-S06SA05
[n] M. Lau et al., “Modular Solid-State Power Amplifiers for Particle Accelerator Facilities”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, paper TUPB13, pp. XX-XX.
[n] W. Smith, M. Arce, M. Bär, M. Gorgoi, C. E. Jimenez, and I. Rudolph, “Using ArUco Codes for Beam Spot Analysis with a Camera at an Unknown Position”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1264-1268. doi:10.18429/JACoW-ICALEPCS2023-THMBCMO30
[n] C.-Y. Tan and M. Balcewicz, “Fermilab Booster beam emittances from quadrupole modes measured by BPMs”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2307-2310. doi:10.18429/JACoW-IPAC2024-WEPG41
[n] S. L. Clark, P. S. Dyer, and S. Nemesure, “Standardizing a Python Development Environment for Large Controls Systems”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 277-280. doi:10.18429/JACoW-ICALEPCS2021-MOPV049
[n] E. Wu, “Study on the weighting determination of leveling control network adjustment and programming”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPA133, unpublished.
[n] L. Li, J. Luo, and Z. Ni, “Fast Creation of Control and Monitor Graphical User Interface for PEPC of Laser Fusion Facility Based on ICSFF”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 871-874. doi:10.18429/JACoW-ICALEPCS2021-THPV007
[n] O. J. Kuiken, A. Gerbershagen, P. Schakel, J. Schwab, and J. K. van Abbema, “Upgrade of the AGOR Cyclotron Control System at UMCG-PARTREC”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 391-394. doi:10.18429/JACoW-ICALEPCS2023-TUMBCMO18
For LaTeX
Use Complete Form
For BibTeX
References
- Z. Zhou, “Conception design for high-resolution reconstruction of fault occurrence”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL023, unpublished.
- S. Kurokawa, “Status of TRISTAN-II Project”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2004-2007.
- Peng Zhao-hua, “THERMAL CALCULATION AND DESIGN OF THE RFQ CAVITY”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper THP082, pp. XX-XX.
- G. Knap, T. M. Cobb, Y. Moazzam, U. K. Pedersen, and C. J. Reynolds, “Kubernetes for EPICS IOCs”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 835-838.
- Xiongwei Zhu, Kazuhisa Nakajima, “BEAM DYNAMICS SIMULATION OF W-BAND PHOTOINJECTOR”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEP077, pp. XX-XX.
- N. Xie, Y. H. Guo, B. J. Wang, and R. Wang, “Design of Real-Time Alarm System for CAFe”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 867-870.
- T. G. Primidis, V. Soloviev, S. G. Wells, and C. P. Welsch, “Design and Optimisation of a Stationary Chest Tomosynthesis System with Multiple Flat Panel Field Emitter Arrays: Monte Carlo Simulations and Computer Aided Designs”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 3034-3037.
- Min-joon Park, Han-sung Kim, Moon-sung Chun, Kie-hyung Chung, Hyeok-jung Kwon, Kang-ok Lee, “ERROR ANALYSIS AND FABRICATION OF THE PROTOTYPE BENDING MAGNET FOR THE FANTRON-I”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEP057, pp. XX-XX.
- P. D. Hermes et al., “A Novel Tool for Beam Dynamics Studies with Hollow Electron Lenses”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 176-179.
- S. Di Mitri, “On the production of short X-ray pulses at diffraction-limited light sources, an update and recent developments”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOZN2, unpublished.
- L. Pranovi and M. Montis, “Integrating EPICS Control System in VR Environment: Proof of Concept”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP039, pp. 599-601.
- K. Brown and S. Biedron, “Summary of the 3rd ICFA Beam Dynamics Mini-Workshop on Machine Learning Applications for Particle Accelerators”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL010, pp. 4440-4443.
- S. Yates and C. Howell, “Measurement of the 80Se(γ,n) reaction with linearly polarized γ rays”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM137, unpublished.
- A. H. Ninane, J. L. Martou, M. Nemry, and F. Somers, “A VMEbus General-Purpose Data Acquisition System”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S06SA05, pp. 265-268.
- M. Lau et al., “Modular Solid-State Power Amplifiers for Particle Accelerator Facilities”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, paper TUPB13, pp. XX-XX.
- W. Smith, M. Arce, M. Bär, M. Gorgoi, C. E. Jimenez, and I. Rudolph, “Using ArUco Codes for Beam Spot Analysis with a Camera at an Unknown Position”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THMBCMO30, pp. 1264-1268.
- C.-Y. Tan and M. Balcewicz, “Fermilab Booster beam emittances from quadrupole modes measured by BPMs”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG41, pp. 2307-2310.
- S. L. Clark, P. S. Dyer, and S. Nemesure, “Standardizing a Python Development Environment for Large Controls Systems”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 277-280.
- E. Wu, “Study on the weighting determination of leveling control network adjustment and programming”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA133, unpublished.
- L. Li, J. Luo, and Z. Ni, “Fast Creation of Control and Monitor Graphical User Interface for PEPC of Laser Fusion Facility Based on ICSFF”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 871-874.
- O. J. Kuiken, A. Gerbershagen, P. Schakel, J. Schwab, and J. K. van Abbema, “Upgrade of the AGOR Cyclotron Control System at UMCG-PARTREC”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUMBCMO18, pp. 391-394.
Back to search