Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Marongiu, G. Kube, M. Lantschner, A. I. Novokshonov, and K. Wittenburg, “Emittance Diagnostics at PETRA IV”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 430-433. doi:10.18429/JACoW-IBIC2022-WEP20
[n] A. Arzenton et al., “The SPES-ISOLPHARM beamline for the production of medical radionuclides at INFN-LNL”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 315-318. doi:10.18429/JACoW-HIAT2025-FRA04
[n] G. R. Mascali et al., “Characterization of the ECR ion source LEGIS extraction system and its low energy beam transport line at Legnaro National Laboratories”, in Proc. ECRIS'24, Darmstadt, Germany, Sep. 2024, pp. 22-26. doi:10.18429/JACoW-ECRIS2024-MOD2
[n] A. Moutardier et al., “Loss Maps Along the ThomX Transfer Line and the Ring First Turn”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2874-2877. doi:10.18429/JACoW-IPAC2021-WEPAB118
[n] Y. Lee, C. Kim, E.-S. Kim, H.-S. Lee, C. S. Park, and H. S. Shin, “Beam Dynamics Studies on the 50 MeV Electron Linear Accelerator for Ultra-High Dose Rates”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 489-491. doi:10.18429/JACoW-IPAC2022-MOPOTK023
[n] C. Dickerson et al., “nuCARIBU commissioning and initial operation”, presented at the HIAT'25, East Lansing, MI, USA, Jun. 2025, paper MOZ01, unpublished.
[n] G. Lilli, R. Oboe, A. Andrighetto, A. Monetti, L. Centofante, and M. Manzolaro, “The SPES target ion source automated storage system”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4089-4092. doi:10.18429/JACoW-IPAC2023-THPA058
[n] S. Krave, V. Marinozzi, and R. Jayathilaka, “Bi-filar coil winding for fast quench protection”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper SUP059, unpublished.
[n] G. Cirrone et al., “Ion acceleration by laser-matter interaction: status and perspective with the upcoming I-LUCE facility at INFN-LNS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4386-4388. doi:10.18429/JACoW-IPAC2023-THPA179
[n] I. Drebot et al., “Brixsino high-flux dual X-ray and THz radiation source based on energy recovery linacs”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2123-2126. doi:10.18429/JACoW-IPAC2023-TUPL162
[n] B. Sinha, R. K. Bhandari, and A. Chakrabarti, “SC Cyclotron and RIB Facilities in Kolkata”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOPD001, pp. 89-93.
[n] J. H. Park et al., “Measurements of Transverse Emittance for RF Photocathode Gun at the PAL”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAP022, pp. 1760-1762.
[n] S. L. Andrianov, M. F. Moisio, and C. R. Roncolato, “The First Design of Medium Resolution Mass Spectrometer (MRMS) High Voltage Platform in a SPES Project”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper TUPSA27, pp. 94-96.
[n] M. P. Laverty, S. F. Fang, and K. Fong, “TRIUMF ISAC II RF Control System Design and Testing”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF002, pp. 953-955.
[n] N. Biancacci et al., “Advancements in injection efficiency modelling for the Low Energy Ion Ring (LEIR) at CERN”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 539-542. doi:10.18429/JACoW-IPAC2023-MOPL016
[n] J.-S. Oh and H. Matsumoto, “R&D of the Long-Life Thyratron Tube”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP025, pp. 622-624.
[n] T. Kobayashi et al., “Plasma Lens and Plasma Wakefield Acceleration Experiments Using Twin Linacs”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3552-3555.
[n] M. Ballan et al., “Additively manufactured tantalum cathode for FEBIAD type ion sources: production, geometric measurements, and high temperature test”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4950-4952. doi:10.18429/JACoW-IPAC2023-THPM026
[n] V. S. Morozov et al., “Acceleration of Polarized Protons and Deuterons in the Ion Collider Ring of JLEIC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3014-3017. doi:10.18429/JACoW-IPAC2017-WEPIK038
[n] A. D. Pai, “Streamlining Hardware Design, Cable Fabrication, and Installation of Beckhoff Hardware in Field”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper MOPHA108, pp. XX-XX.
[n] H. Do, Y. H. Kim, and M. J. Park, “Development of EPICS for RF Fundamental Power Coupler Experimental Test Bench”, presented at the ICALEPCS'23, Cape Town, South Africa, Oct. 2023, paper TUPDP062, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Marongiu, G. Kube, M. Lantschner, A. I. Novokshonov, and K. Wittenburg, “Emittance Diagnostics at PETRA IV”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 430-433.
- A. Arzenton et al., “The SPES-ISOLPHARM beamline for the production of medical radionuclides at INFN-LNL”, in Proc. 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper FRA04, pp. 315-318.
- G. R. Mascali et al., “Characterization of the ECR ion source LEGIS extraction system and its low energy beam transport line at Legnaro National Laboratories”, in Proc. 26th International Workshop on ECR Ion Sources (ECRIS'24), Darmstadt, Germany, Sep. 2024, pp. 22-26.
- A. Moutardier et al., “Loss Maps Along the ThomX Transfer Line and the Ring First Turn”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2874-2877.
- Y. Lee, C. Kim, E.-S. Kim, H.-S. Lee, C. S. Park, and H. S. Shin, “Beam Dynamics Studies on the 50 MeV Electron Linear Accelerator for Ultra-High Dose Rates”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 489-491.
- C. Dickerson et al., “nuCARIBU commissioning and initial operation”, presented at the 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper MOZ01, unpublished.
- G. Lilli, R. Oboe, A. Andrighetto, A. Monetti, L. Centofante, and M. Manzolaro, “The SPES target ion source automated storage system”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA058, pp. 4089-4092.
- S. Krave, V. Marinozzi, and R. Jayathilaka, “Bi-filar coil winding for fast quench protection”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper SUP059, unpublished.
- G. Cirrone et al., “Ion acceleration by laser-matter interaction: status and perspective with the upcoming I-LUCE facility at INFN-LNS”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA179, pp. 4386-4388.
- I. Drebot et al., “Brixsino high-flux dual X-ray and THz radiation source based on energy recovery linacs”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL162, pp. 2123-2126.
- B. Sinha, R. K. Bhandari, and A. Chakrabarti, “SC Cyclotron and RIB Facilities in Kolkata”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TOPD001, pp. 89-93.
- J. H. Park et al., “Measurements of Transverse Emittance for RF Photocathode Gun at the PAL”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAP022, pp. 1760-1762.
- S. L. Andrianov, M. F. Moisio, and C. R. Roncolato, “The First Design of Medium Resolution Mass Spectrometer (MRMS) High Voltage Platform in a SPES Project”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper TUPSA27, pp. 94-96.
- M. P. Laverty, S. F. Fang, and K. Fong, “TRIUMF ISAC II RF Control System Design and Testing”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF002, pp. 953-955.
- N. Biancacci et al., “Advancements in injection efficiency modelling for the Low Energy Ion Ring (LEIR) at CERN”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL016, pp. 539-542.
- J.-S. Oh and H. Matsumoto, “R&D of the Long-Life Thyratron Tube”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper THP025, pp. 622-624.
- T. Kobayashi et al., “Plasma Lens and Plasma Wakefield Acceleration Experiments Using Twin Linacs”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3552-3555.
- M. Ballan et al., “Additively manufactured tantalum cathode for FEBIAD type ion sources: production, geometric measurements, and high temperature test”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM026, pp. 4950-4952.
- V. S. Morozov et al., “Acceleration of Polarized Protons and Deuterons in the Ion Collider Ring of JLEIC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3014-3017.
- A. D. Pai, “Streamlining Hardware Design, Cable Fabrication, and Installation of Beckhoff Hardware in Field”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper MOPHA108, pp. XX-XX.
- H. Do, Y. H. Kim, and M. J. Park, “Development of EPICS for RF Fundamental Power Coupler Experimental Test Bench”, presented at the 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP062, unpublished.
Back to search