Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Simpson, R. Konecny, S. L. Kramer, and D. Suddeth, “Test Facility for Relativistic Beam Pickups”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3648-3651.
[n] K. Umemori et al., “Experimental Study of Positron Production from Monocrystalline Targets at the KEKB Injector Linac”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP091, pp. 797-799.
[n] Y. Jiang, M. Gai, J. Hirshfield, M. Palmer, and S. Shchelkunov, “Novel deuteron accelerator for nuclear waste transmutation”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1564-1566. doi:10.18429/JACoW-IPAC2025-TUPS059
[n] S. V. Kuzikov et al., “A 2.45 GHz Photoinjector Gun for an FEL Driven by Laser Wakefield Accelerated Beam”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 444-446. doi:10.18429/JACoW-FEL2017-WEP012
[n] M. Camarda et al., “Towards Full Silicon 4H-SiC Based X-Ray Beam Monitoring”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 665-668. doi:10.18429/JACoW-IBIC2019-THAO02
[n] B. Ledroit and K. Aulenbacher, “Collimation of Target Induced Halo Following MAGIX at MESA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3839-3842. doi:10.18429/JACoW-IPAC2019-THPRB019
[n] W. Sulaiman Khail and P. Schnizer, “Development of a flexible digital twin framework for accelerators using design patterns”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 3080-3082. doi:10.18429/JACoW-IPAC2025-THPS050
[n] B. Ledroit and K. Aulenbacher, “Collimation of Target Induced Halo Following MAGIX at MESA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3839-3842. doi:10.18429/JACoW-IPAC2019-THPRB019
[n] G. Skripka, P. Dijkstal, G. Iadarola, L. Mether, G. Rumolo, and E. G. T. Wulff, “Comparison of Electron Cloud Build-Up Simulations Against Heat Load Measurements for the LHC Arcs With Different Beam Configurations”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3232-3235. doi:10.18429/JACoW-IPAC2019-WEPTS051
[n] B. Simons, J. Eldred, N. Banerjee, and V. Shiltsev, “IOTA experiment for proton pulse compression at extreme space-charge”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 486-490. doi:10.18429/JACoW-NAPAC2025-TUP055
[n] V. A. Dolgashev and T. O. Raubenheimer, “Simulation of RF Breakdown Effects on NLC Beam”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP56, pp. 396-398.
[n] G. Ha and N. Majernik, “Generation of sawtooth correlation for bunching factor enhancement”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 380-383. doi:10.18429/JACoW-IPAC2024-MOPG38
[n] P. Sprangle, C. M. Tang, and L. Vlahos, “A Cyclotron Resonance Laser Accelerator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3177-3180.
[n] T. T. Nakamura et al., “The Upgrade Status of the SuperKEKB Magnet Control System”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper WEPHA106, pp. XX-XX.
[n] J. Q. Shao et al., “Preparation of Titanum-Zirconium-Vanadium Films by Quantitative Deposition”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4210-4212. doi:10.18429/JACoW-IPAC2019-THPTS045
[n] A. Strinning, S. R. A. Adam, P. Baumann, V. Gandel, D. C. Kiselev, and Y. Lee, “Visual Inspection of a Copper Collimator Irradiated by 590 MeV Protons at PSI”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD64, pp. 245-249.
[n] P. J. Neyman, J. Blau, K. R, W. B. Colson, S. C. Gottschalk, and A. M. M. Todd, “Free Electron Lasers in 2017”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 204-209. doi:10.18429/JACoW-FEL2017-MOP066
For LaTeX
Use Complete Form
For BibTeX
References
- J. Simpson, R. Konecny, S. L. Kramer, and D. Suddeth, “Test Facility for Relativistic Beam Pickups”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3648-3651.
- K. Umemori et al., “Experimental Study of Positron Production from Monocrystalline Targets at the KEKB Injector Linac”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper THP091, pp. 797-799.
- Y. Jiang, M. Gai, J. Hirshfield, M. Palmer, and S. Shchelkunov, “Novel deuteron accelerator for nuclear waste transmutation”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS059, pp. 1564-1566.
- S. V. Kuzikov et al., “A 2.45 GHz Photoinjector Gun for an FEL Driven by Laser Wakefield Accelerated Beam”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 444-446.
- M. Camarda et al., “Towards Full Silicon 4H-SiC Based X-Ray Beam Monitoring”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 665-668.
- B. Ledroit and K. Aulenbacher, “Collimation of Target Induced Halo Following MAGIX at MESA”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3839-3842.
- W. Sulaiman Khail and P. Schnizer, “Development of a flexible digital twin framework for accelerators using design patterns”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS050, pp. 3080-3082.
- B. Ledroit and K. Aulenbacher, “Collimation of Target Induced Halo Following MAGIX at MESA”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3839-3842.
- G. Skripka, P. Dijkstal, G. Iadarola, L. Mether, G. Rumolo, and E. G. T. Wulff, “Comparison of Electron Cloud Build-Up Simulations Against Heat Load Measurements for the LHC Arcs With Different Beam Configurations”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3232-3235.
- B. Simons, J. Eldred, N. Banerjee, and V. Shiltsev, “IOTA experiment for proton pulse compression at extreme space-charge”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 486-490.
- V. A. Dolgashev and T. O. Raubenheimer, “Simulation of RF Breakdown Effects on NLC Beam”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper TUP56, pp. 396-398.
- G. Ha and N. Majernik, “Generation of sawtooth correlation for bunching factor enhancement”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG38, pp. 380-383.
- P. Sprangle, C. M. Tang, and L. Vlahos, “A Cyclotron Resonance Laser Accelerator”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3177-3180.
- T. T. Nakamura et al., “The Upgrade Status of the SuperKEKB Magnet Control System”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper WEPHA106, pp. XX-XX.
- J. Q. Shao et al., “Preparation of Titanum-Zirconium-Vanadium Films by Quantitative Deposition”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4210-4212.
- A. Strinning, S. R. A. Adam, P. Baumann, V. Gandel, D. C. Kiselev, and Y. Lee, “Visual Inspection of a Copper Collimator Irradiated by 590 MeV Protons at PSI”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD64, pp. 245-249.
- P. J. Neyman, J. Blau, K. R, W. B. Colson, S. C. Gottschalk, and A. M. M. Todd, “Free Electron Lasers in 2017”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 204-209.
Back to search