Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. Koseki et al., “Field Measurement of the Magnet Prototypes for the VSX Project”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP167, pp. 3363-3365.
[n] J. A. Holmes and D.-O. Jeon, “Effects of Resonances on Halo Formation in High Intensity Rings”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6A06, pp. 1303-1305.
[n] S. Y. Noh, S. D. Chang, J. G. Hwang, G. Hahn, and T. K. Yang, “Development of a Scintillation Screen Monitor for Transverse Ion Beam Profile Measurment at the Khima Project”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 410-413. doi:10.18429/JACoW-IBIC2015-TUPB043
[n] R. M. Lill, G. Decker, J. E. Hoyt, and X. Sun, “Measurement, Simulation, and Suppression of APS Storage Ring Vacuum Chamber TE Modes Impacting Vertical BPM Readings”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM049, pp. 260-264.
[n] P. Duval, M. Lomperski, and J. Bobnar, “Control System Evolution and the Importance of Trial and Error”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 6-9. doi:10.18429/JACoW-PCAPAC2016-WECSPLCO02
[n] V. Sharma, S. Acharya, and K. C. Mittal, “Machine Throughput Improvement Achieved Using Innovative Control Technique”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD04, pp. 144-144.
[n] A. Chan, G. Crane, I. MacGregor, and S. Meyer, “Data Warehouse on the Web for Accelerator Fabrication and Maintenance”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5C005, pp. 2413-2415.
[n] P. J. Tallerico, “The LAMPF Klystron Repair Facility”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper P23, pp. 427-429.
[n] G. Marcus et al., “Regenerative Amplification for a Hard X-Ray Free-Electron Laser”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 118-121. doi:10.18429/JACoW-FEL2019-TUP032
[n] C. Bourat, B. Aune, M. Jablonka, and J. M. Joly, “A 600 MHz Chopper System for an Electron Linac”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 982-985.
[n] J. T. Seeman and J. C. Sheppard, “Special SLC Linac Developments”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE1-2, pp. 214-219.
[n] Y. J. Lin, W.-K. Lau, M.-C. Chou, and W.-Y. Chiang, “Dark current reduction for NSRRC photoinjector system by collimator”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2112-2115. doi:10.18429/JACoW-IPAC2024-WEPC63
[n] U. Wienands and R. V. Servranckx, “Towards a Slow Extraction System for the Triumf Kaon Factory Extender Ring with 0.1% Losses”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 269-272.
[n] S. Kozub et al., “Design and Tests of UNK Superconducting Correction Magnet Models”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2772-2775.
[n] C. S. Chen, C. K. Chan, K. H. Hsu, Y. T. Huang, Y.-H. Liu, and C. S. Yang, “The Installations of the In-vacuum Kicker System of the Booster Injection Section in TPS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1971-1973. doi:10.18429/JACoW-IPAC2014-WEPRO014
[n] K. Jensen, D. W. Feldman, N. A. Moody, P. G. O, and J. J. Petillo, “A Theoretical Photocathode Emittance Model Including Temperature and Field Effects”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS091, pp. 1377-1379.
[n] S. W. Jang et al., “The Development of Button Type BPM Electronics for RAON”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 362-364. doi:10.18429/JACoW-IPAC2017-MOPAB100
[n] J.-L. Pellegrin, “Transverse Oscillations Damping with Wide-Band Feedback on SPEAR II”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1500-1505.
[n] L. Grubert, N. Barov, B. Cluggish, S. Galkin, and J. S. Kim, “Graphical Front-End and Object-Oriented Design for IonEx, an Ion Extraction Modeling Code”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP053, pp. 3324-3326.
[n] Yu. K. Alekseev et al., “DIFFRACTION ACCELERATOR OF CHARGED PARTICLES”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THBP22, pp. XX-XX.
[n] P. K. Skowro et al., “Summary of the First Fully Operational Run of LINAC4 at CERN”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 58-61. doi:10.18429/JACoW-IPAC2022-MOPOST007
[n] H. Hanerfeld, W. B. Herrmannsfeldt, M. B. James, and R. H. Miller, “SLC Injector Modeling”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2510-2513.
[n] A. Warwick, D. Gough, D. Keefe, and H. Meuth, “Acceleration, Current Amplification and Emittance in MBE-4, an Experimental Multiple Beam Induction Linear Accelerator for Heavy Ions”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-06, pp. 51-53.
[n] Y. Yamaguchi, Y. Abe, F. Suzaki, and M. Wakasugi, “Commissioning of the Rare-RI Ring at RIKEN RI Beam Factory”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper FRYAUD01, pp. 182-186.
[n] H. Schlarb et al., “Bunch-to-Bunch Energy Stability Test of the Nb Prototypes of the TESLA Superstructure”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB005, pp. 2730-2732.
[n] F. Galluccio, Z. Guo, W. Scandale, F. Schmidt, and A. Verdier, “Long-term Stability Studies for the Large Hadron Collider”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1669-1672.
[n] D. Oumbarek Espinos, M. Masuzawa, M. Tawada, and A. Zhidkov, “Plasma based optics for electron beam fast micro-bunching”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPB025, unpublished.
[n] D. J. Wallace et al., “Improvements in Aladdin Bend Magnet Stability by Reduction of Leakage Currents”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAG017, pp. 2303-2305.
[n] U. Ellenberger et al., “The SwissFEL C-band RF Pulse Compressor: Manufacturing and Proof of Precision by RF Measurements”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP056, pp. 859-863.
[n] F. Armborst and J. Kallestrup, “Transverse Resonant Island Buckets at the SLS”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPM019, unpublished.
[n] B. Mustapha, A. Abogoda, A. Barcikowski, R. L. Fischer, and A. Nassiri, “Design of a High-Gradient S-Band Annular Coupled Structure”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 762-764. doi:10.18429/JACoW-NAPAC2019-WEPLM72
[n] E. Weihreter et al., “A Superconducting 7T Multipole Wiggler for the BESSY II Synchrotron Radiation Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH002, pp. 2450-2452.
[n] H. A. Duerr et al., “XPS Studies of Cs2Te Photocathodes”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper WEPPH048, pp. 457-460.
[n] T. Ota et al., “Measurement of an L-Band Three-Cell Superconducting Cavity Fabricated in TOSHIBA”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D004, pp. 80-82.
[n] F. Amman, “Electron Positron Storage Rings: Status and Present Limitations”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 1073-1082.
[n] S. Q. Tian, B. C. Jiang, M. Z. Zhang, and Z. T. Zhao, “Double-mini-beta Optics for the SSRF Storage Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO031, pp. 1943-1945.
[n] A. Babkin, G. Krainov, A. Ivanov, and V. Shirokov, “COMPACT 500 kV TANDEM ACCELERATOR ON THE BASE OF HIGH FREQENCY RECTIFIER AND GAS-FILLED FEEDTHROUGH INSULATOR”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUJP12, pp. XX-XX.
[n] H. Fujimori et al., “Online Analyzer System for the Development of the Long-lived Charge-Stripping Foil at the J-PARC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB058, pp. 1653-1655.
[n] J. Bengtsson, R. Bartolini, H. Ghasem, B. Singh, and A. Streun, “Control of the Nonlinear Dynamics for Medium Energy Synchrotron Light Sources”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4037-4041. doi:10.18429/JACoW-IPAC2018-THPMF006
[n] K. Jacobs et al., “Recent Developments at Aladdin”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE070, pp. 3813-3815.
[n] O. Marcouille et al., “Preliminary Design of the SOLEIL Insertion Devices”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE029, pp. 2625-2627.
[n] H. Geng, Z. Guo, Z. Li, C. Meng, S. Pei, and J. Y. Tang, “Error Analysis for C-ADS MEBT2”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO020, pp. 1925-1927.
[n] A. Caruso et al., “The Upgraded Control of the LNS Superconducting Cyclotron Radio-Frequency System”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-23, pp. 253-256.
[n] Y. Suetsugu, T. Kageyama, K. Shibata, and Y. Takeuchi, “Development of Winged HOM Damper for Movable Mask in KEKB”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPE028, pp. 803-805.
[n] B. L. Duelli, W. Joho, V. R, and B. L. White, “The Ion Source and Injection System (ISIS) for the TRIUMF Central Region Model (CRM)”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 216-226.
[n] M. W. Guetg, Y. Ding, Z. Huang, and A. A. Lutman, “Generation of High Power, High Intensity, Ultra Short X-Ray FEL Pulses”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4384-4386. doi:10.18429/JACoW-IPAC2018-THPMK045
[n] W. H. Backer et al., “An X-Ray Synchrotron Source for Europe, Members of the Machine Sub-Group of the ESF ad hoc Commiittee for Synchrotron Radiation”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3809-3812.
[n] L. Ma, P. Shi, K. Xue, J. Cao, and L. Wang, “The Tune Measurements in the BEPC Storage Ring”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D053, pp. 522-524.
[n] G. Sch??nemann et al., “An FPGA Based Data Acquisition System for a Fast Orbit Feedback at DELTA”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD08, pp. 303-305.
[n] J. Grillenberger, M. Humbel, J. Y. Raguin And P, and A. Schmelzbach, “Commissioning And Tuning Of The New Buncher System In The 870 Kev Injection Beamline”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 464-466.
[n] S. Y. Noh, S. D. Chang, J. G. Hwang, G. Hahn, and T. K. Yang, “The Development of Scintillating Screen Detector for Beam Monitoring at the KHIMA Project”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 244-247. doi:10.18429/JACoW-IPAC2016-MOPMR010
[n] N. A. Stilin et al., “Design of a 1.3 GHz High-Power RF Coupler for Conduction-Cooled Systems”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 342-346. doi:10.18429/JACoW-SRF2023-MOPMB094
[n] S.-Y. Teng et al., “Design study of a THz SASE FEL at NSRRC”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM034, unpublished.
[n] M. Fujisawa et al., “Reduction In Resistive-Wall Impedance of Insertion-Device Vacuum Chamber By Copper Coating”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP10H, pp. 984-986.
[n] I. Ito, R. K. Kasahara, S. Nakamura, N. Nakamura, K. Torizuka, and D. Yoshitomi, “Recent Progress of an Yb-doped Fiber Laser System for an ERL-based Light Source”, in Proc. ERL'11, Tsukuba, Japan, Oct. 2011, paper PSP020, pp. 137-139.
[n] I. Blumenfeld et al., “Correlation of Beam Parameters to Decelerating Gradient in the E-167 Plasma Wakefield Acceleration Experiment”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS040, pp. 3091-3093.
[n] T. Koseki et al., “Designs and Measurements of Prototype Magnets for the High-Brilliance Synchrotron Light Source at the University of Tokyo”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH303, pp. 3609-3611.
[n] K. R. Kim et al., “Proton Beam Energy Measurement Using Semiconductor Detectors at the 45MeV Test Beam Line of PEFP”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN055, pp. 4126-4128.
[n] R. Nagaoka, L. Cassinari, M. D. Diop, M.-P. Level, C. Mariette, and R. Sreedharan, “Fast Beam-ion Instability Studies at SOLEIL”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD028, pp. 1985-1987.
[n] S. Kim et al., “Start-to-end simulation of second hard X-ray beamline at the PAL-XFEL and plans of R&D activities on high-brightness XFEL generation”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 384-387. doi:10.18429/JACoW-IPAC2024-MOPG40
For LaTeX
Use Complete Form
For BibTeX
References
- T. Koseki et al., “Field Measurement of the Magnet Prototypes for the VSX Project”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP167, pp. 3363-3365.
- J. A. Holmes and D.-O. Jeon, “Effects of Resonances on Halo Formation in High Intensity Rings”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP6A06, pp. 1303-1305.
- S. Y. Noh, S. D. Chang, J. G. Hwang, G. Hahn, and T. K. Yang, “Development of a Scintillation Screen Monitor for Transverse Ion Beam Profile Measurment at the Khima Project”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 410-413.
- R. M. Lill, G. Decker, J. E. Hoyt, and X. Sun, “Measurement, Simulation, and Suppression of APS Storage Ring Vacuum Chamber TE Modes Impacting Vertical BPM Readings”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM049, pp. 260-264.
- P. Duval, M. Lomperski, and J. Bobnar, “Control System Evolution and the Importance of Trial and Error”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 6-9.
- V. Sharma, S. Acharya, and K. C. Mittal, “Machine Throughput Improvement Achieved Using Innovative Control Technique”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THPD04, pp. 144-144.
- A. Chan, G. Crane, I. MacGregor, and S. Meyer, “Data Warehouse on the Web for Accelerator Fabrication and Maintenance”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5C005, pp. 2413-2415.
- P. J. Tallerico, “The LAMPF Klystron Repair Facility”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper P23, pp. 427-429.
- G. Marcus et al., “Regenerative Amplification for a Hard X-Ray Free-Electron Laser”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 118-121.
- C. Bourat, B. Aune, M. Jablonka, and J. M. Joly, “A 600 MHz Chopper System for an Electron Linac”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 982-985.
- J. T. Seeman and J. C. Sheppard, “Special SLC Linac Developments”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE1-2, pp. 214-219.
- Y. J. Lin, W.-K. Lau, M.-C. Chou, and W.-Y. Chiang, “Dark current reduction for NSRRC photoinjector system by collimator”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC63, pp. 2112-2115.
- U. Wienands and R. V. Servranckx, “Towards a Slow Extraction System for the Triumf Kaon Factory Extender Ring with 0.1% Losses”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 269-272.
- S. Kozub et al., “Design and Tests of UNK Superconducting Correction Magnet Models”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2772-2775.
- C. S. Chen, C. K. Chan, K. H. Hsu, Y. T. Huang, Y.-H. Liu, and C. S. Yang, “The Installations of the In-vacuum Kicker System of the Booster Injection Section in TPS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1971-1973.
- K. Jensen, D. W. Feldman, N. A. Moody, P. G. O, and J. J. Petillo, “A Theoretical Photocathode Emittance Model Including Temperature and Field Effects”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMS091, pp. 1377-1379.
- S. W. Jang et al., “The Development of Button Type BPM Electronics for RAON”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 362-364.
- J.-L. Pellegrin, “Transverse Oscillations Damping with Wide-Band Feedback on SPEAR II”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1500-1505.
- L. Grubert, N. Barov, B. Cluggish, S. Galkin, and J. S. Kim, “Graphical Front-End and Object-Oriented Design for IonEx, an Ion Extraction Modeling Code”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP053, pp. 3324-3326.
- Yu. K. Alekseev et al., “DIFFRACTION ACCELERATOR OF CHARGED PARTICLES”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THBP22, pp. XX-XX.
- P. K. Skowro et al., “Summary of the First Fully Operational Run of LINAC4 at CERN”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 58-61.
- H. Hanerfeld, W. B. Herrmannsfeldt, M. B. James, and R. H. Miller, “SLC Injector Modeling”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2510-2513.
- A. Warwick, D. Gough, D. Keefe, and H. Meuth, “Acceleration, Current Amplification and Emittance in MBE-4, an Experimental Multiple Beam Induction Linear Accelerator for Heavy Ions”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-06, pp. 51-53.
- Y. Yamaguchi, Y. Abe, F. Suzaki, and M. Wakasugi, “Commissioning of the Rare-RI Ring at RIKEN RI Beam Factory”, in Proc. 10th Workshop on Beam Cooling and Related Topics (COOL'15), Newport News, VA, USA, Sep.-Oct. 2015, paper FRYAUD01, pp. 182-186.
- H. Schlarb et al., “Bunch-to-Bunch Energy Stability Test of the Nb Prototypes of the TESLA Superstructure”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB005, pp. 2730-2732.
- F. Galluccio, Z. Guo, W. Scandale, F. Schmidt, and A. Verdier, “Long-term Stability Studies for the Large Hadron Collider”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1669-1672.
- D. Oumbarek Espinos, M. Masuzawa, M. Tawada, and A. Zhidkov, “Plasma based optics for electron beam fast micro-bunching”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB025, this conference.
- D. J. Wallace et al., “Improvements in Aladdin Bend Magnet Stability by Reduction of Leakage Currents”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAG017, pp. 2303-2305.
- U. Ellenberger et al., “The SwissFEL C-band RF Pulse Compressor: Manufacturing and Proof of Precision by RF Measurements”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP056, pp. 859-863.
- F. Armborst and J. Kallestrup, “Transverse Resonant Island Buckets at the SLS”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM019, unpublished.
- B. Mustapha, A. Abogoda, A. Barcikowski, R. L. Fischer, and A. Nassiri, “Design of a High-Gradient S-Band Annular Coupled Structure”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 762-764.
- E. Weihreter et al., “A Superconducting 7T Multipole Wiggler for the BESSY II Synchrotron Radiation Source”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH002, pp. 2450-2452.
- H. A. Duerr et al., “XPS Studies of Cs2Te Photocathodes”, in Proc. 29th Int. Free Electron Laser Conf. (FEL'07), Novosibirsk, Russia, Aug. 2007, paper WEPPH048, pp. 457-460.
- T. Ota et al., “Measurement of an L-Band Three-Cell Superconducting Cavity Fabricated in TOSHIBA”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D004, pp. 80-82.
- F. Amman, “Electron Positron Storage Rings: Status and Present Limitations”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 1073-1082.
- S. Q. Tian, B. C. Jiang, M. Z. Zhang, and Z. T. Zhao, “Double-mini-beta Optics for the SSRF Storage Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO031, pp. 1943-1945.
- A. Babkin, G. Krainov, A. Ivanov, and V. Shirokov, “COMPACT 500 kV TANDEM ACCELERATOR ON THE BASE OF HIGH FREQENCY RECTIFIER AND GAS-FILLED FEEDTHROUGH INSULATOR”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper TUJP12, pp. XX-XX.
- H. Fujimori et al., “Online Analyzer System for the Development of the Long-lived Charge-Stripping Foil at the J-PARC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB058, pp. 1653-1655.
- J. Bengtsson, R. Bartolini, H. Ghasem, B. Singh, and A. Streun, “Control of the Nonlinear Dynamics for Medium Energy Synchrotron Light Sources”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4037-4041.
- K. Jacobs et al., “Recent Developments at Aladdin”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAE070, pp. 3813-3815.
- O. Marcouille et al., “Preliminary Design of the SOLEIL Insertion Devices”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE029, pp. 2625-2627.
- H. Geng, Z. Guo, Z. Li, C. Meng, S. Pei, and J. Y. Tang, “Error Analysis for C-ADS MEBT2”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO020, pp. 1925-1927.
- A. Caruso et al., “The Upgraded Control of the LNS Superconducting Cyclotron Radio-Frequency System”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-23, pp. 253-256.
- Y. Suetsugu, T. Kageyama, K. Shibata, and Y. Takeuchi, “Development of Winged HOM Damper for Movable Mask in KEKB”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPE028, pp. 803-805.
- B. L. Duelli, W. Joho, V. R, and B. L. White, “The Ion Source and Injection System (ISIS) for the TRIUMF Central Region Model (CRM)”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 216-226.
- M. W. Guetg, Y. Ding, Z. Huang, and A. A. Lutman, “Generation of High Power, High Intensity, Ultra Short X-Ray FEL Pulses”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4384-4386.
- W. H. Backer et al., “An X-Ray Synchrotron Source for Europe, Members of the Machine Sub-Group of the ESF ad hoc Commiittee for Synchrotron Radiation”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3809-3812.
- L. Ma, P. Shi, K. Xue, J. Cao, and L. Wang, “The Tune Measurements in the BEPC Storage Ring”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D053, pp. 522-524.
- G. Sch??nemann et al., “An FPGA Based Data Acquisition System for a Fast Orbit Feedback at DELTA”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPD08, pp. 303-305.
- J. Grillenberger, M. Humbel, J. Y. Raguin And P, and A. Schmelzbach, “Commissioning And Tuning Of The New Buncher System In The 870 Kev Injection Beamline”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 464-466.
- S. Y. Noh, S. D. Chang, J. G. Hwang, G. Hahn, and T. K. Yang, “The Development of Scintillating Screen Detector for Beam Monitoring at the KHIMA Project”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 244-247.
- N. A. Stilin et al., “Design of a 1.3 GHz High-Power RF Coupler for Conduction-Cooled Systems”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOPMB094, pp. 342-346.
- S.-Y. Teng et al., “Design study of a THz SASE FEL at NSRRC”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM034, this conference.
- M. Fujisawa et al., “Reduction In Resistive-Wall Impedance of Insertion-Device Vacuum Chamber By Copper Coating”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP10H, pp. 984-986.
- I. Ito, R. K. Kasahara, S. Nakamura, N. Nakamura, K. Torizuka, and D. Yoshitomi, “Recent Progress of an Yb-doped Fiber Laser System for an ERL-based Light Source”, in Proc. 50th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'11), Tsukuba, Japan, Oct. 2011, paper PSP020, pp. 137-139.
- I. Blumenfeld et al., “Correlation of Beam Parameters to Decelerating Gradient in the E-167 Plasma Wakefield Acceleration Experiment”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS040, pp. 3091-3093.
- T. Koseki et al., “Designs and Measurements of Prototype Magnets for the High-Brilliance Synchrotron Light Source at the University of Tokyo”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH303, pp. 3609-3611.
- K. R. Kim et al., “Proton Beam Energy Measurement Using Semiconductor Detectors at the 45MeV Test Beam Line of PEFP”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN055, pp. 4126-4128.
- R. Nagaoka, L. Cassinari, M. D. Diop, M.-P. Level, C. Mariette, and R. Sreedharan, “Fast Beam-ion Instability Studies at SOLEIL”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD028, pp. 1985-1987.
- S. Kim et al., “Start-to-end simulation of second hard X-ray beamline at the PAL-XFEL and plans of R&D activities on high-brightness XFEL generation”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG40, pp. 384-387.
Back to search