Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F. Ullmann, V. P. Ovsyannikov, M. Schmidt, and G. Zschornack, “Electron Beam Ion Sources, Ion Optical Elements and Beam Diagnostics for Particle Accelerators”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD88, pp. 254-256.
[n] D. Rifuggiato, L. Calabretta, P. Gmaj, and G. Bellomo, “Analysis of the Final Magnetic Measurements of the L.N.S. Superconducting Cyclotron”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-19, pp. 241-244.
[n] E.-C. Huang, P. Anisimov, and L. Rybarcyk, “Benchmarking HPSim with the LANSCE Linac”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2480-2482. doi:10.18429/JACoW-IPAC2023-TUPM112
[n] J. A. Holmes, V. Danilov, J. D. Galambos, and K. Woody, “Longitudinal Impedance Simulations in ORBIT: Benchmarking and Application to the SNS Extracton Kicker”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH311, pp. 2057-2059.
[n] M. Dracos, E. Bouquerel, G. Fanourakis, G. Gokbulut, and A. Kayis Topaksu, “The European Spallation Source Neutrino Super Beam Design Study”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 582-585. doi:10.18429/JACoW-IPAC2019-MOPRB004
[n] E. Bouquerel, “Design Status of the Beam Switchyard for ESSnuSB”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3215-3217. doi:10.18429/JACoW-IPAC2018-THPAK006
[n] K. W. Shepard, “Status of RF Superconductivity at Argonne National Laboratory”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-1, pp. XX-XX.
[n] J. Ferm?®, “Invited Paper: Status Report on GANIL”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper A-04, pp. 1889-1895.
[n] J. E. Petersson, T. Bögershausen, N. Holmberg, M. Olsson, T. S. Richter, and F. Rojas, “Characterizing Motion Control Systems to Enable Accurate Continuous and Event-Based Scans”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1431-1434. doi:10.18429/JACoW-ICALEPCS2023-THPDP052
[n] G. Hochschild and E. Demmel, “RF Power Source Development for the High Current Linear Accelerator of the Spallation Neutron Source (SNQ)”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2836-2839.
[n] E. Bouquerel et al., “The ESSnuSB Target Station”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3831-3834. doi:10.18429/JACoW-IPAC2019-THPRB013
[n] M. Ball et al., “Phase Modulation Induced Particle Diffusion”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP11C, pp. 1256-1258.
[n] E. Acerbi, G. Bellomo, L. Rossi, S. Zhou, and P. Gmaj, “The Magnetic Field Measurements of the Milan Superconducting Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper G2-07, pp. 486-489.
[n] P. Ninin and L. Scibile, “The LHC Access Control System”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT031, pp. 1900-1902.
[n] Y. Shoji and K. Takeda, “Single Shot Bunch-by-Bunch Beam Emittance Measurement of the SPring-8 Linac”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB038, pp. 261-263.
[n] P. Duval et al., “The Babylonization of Control Systems Part II - The Rise of the Fallen Tower”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TH513, pp. XX-XX.
[n] B. Nguyen et al., “Design and characterization of adjustable-length pulse generator for beam kicker system”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3803-3805. doi:10.18429/JACoW-IPAC2024-THPS30
[n] R. Abbott et al., “Design, Commissioning and Operation of the Upgraded CEBAF Injector (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-30, pp. 777-779.
[n] D. C. Weisser, M. Malev, and J. S. Sokolowski, “The Stub to Plate Weld in Quarter Wave Resonators - An Investigation”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-10, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- F. Ullmann, V. P. Ovsyannikov, M. Schmidt, and G. Zschornack, “Electron Beam Ion Sources, Ion Optical Elements and Beam Diagnostics for Particle Accelerators”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD88, pp. 254-256.
- D. Rifuggiato, L. Calabretta, P. Gmaj, and G. Bellomo, “Analysis of the Final Magnetic Measurements of the L.N.S. Superconducting Cyclotron”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-19, pp. 241-244.
- E.-C. Huang, P. Anisimov, and L. Rybarcyk, “Benchmarking HPSim with the LANSCE Linac”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM112, pp. 2480-2482.
- J. A. Holmes, V. Danilov, J. D. Galambos, and K. Woody, “Longitudinal Impedance Simulations in ORBIT: Benchmarking and Application to the SNS Extracton Kicker”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH311, pp. 2057-2059.
- M. Dracos, E. Bouquerel, G. Fanourakis, G. Gokbulut, and A. Kayis Topaksu, “The European Spallation Source Neutrino Super Beam Design Study”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 582-585.
- E. Bouquerel, “Design Status of the Beam Switchyard for ESSnuSB”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3215-3217.
- K. W. Shepard, “Status of RF Superconductivity at Argonne National Laboratory”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-1, pp. XX-XX.
- J. Ferm?®, “Invited Paper: Status Report on GANIL”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper A-04, pp. 1889-1895.
- J. E. Petersson, T. Bögershausen, N. Holmberg, M. Olsson, T. S. Richter, and F. Rojas, “Characterizing Motion Control Systems to Enable Accurate Continuous and Event-Based Scans”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP052, pp. 1431-1434.
- G. Hochschild and E. Demmel, “RF Power Source Development for the High Current Linear Accelerator of the Spallation Neutron Source (SNQ)”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2836-2839.
- E. Bouquerel et al., “The ESSnuSB Target Station”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3831-3834.
- M. Ball et al., “Phase Modulation Induced Particle Diffusion”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP11C, pp. 1256-1258.
- E. Acerbi, G. Bellomo, L. Rossi, S. Zhou, and P. Gmaj, “The Magnetic Field Measurements of the Milan Superconducting Cyclotron”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper G2-07, pp. 486-489.
- P. Ninin and L. Scibile, “The LHC Access Control System”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT031, pp. 1900-1902.
- Y. Shoji and K. Takeda, “Single Shot Bunch-by-Bunch Beam Emittance Measurement of the SPring-8 Linac”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB038, pp. 261-263.
- P. Duval et al., “The Babylonization of Control Systems Part II - The Rise of the Fallen Tower”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper TH513, pp. XX-XX.
- B. Nguyen et al., “Design and characterization of adjustable-length pulse generator for beam kicker system”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS30, pp. 3803-3805.
- R. Abbott et al., “Design, Commissioning and Operation of the Upgraded CEBAF Injector (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-30, pp. 777-779.
- D. C. Weisser, M. Malev, and J. S. Sokolowski, “The Stub to Plate Weld in Quarter Wave Resonators - An Investigation”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-10, pp. XX-XX.
Back to search