Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Doleans et al., “Status Report on the NSCL RF Fragment Separator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS039, pp. 3585-3587.
[n] W. Andreazza et al., “The Design, Construction and Operation of the Beam Instrumentation for the High Intensity and Energy Upgrade of ISOLDE at CERN”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 101-104. doi:10.18429/JACoW-IBIC2016-MOPG27
[n] R. Enparantza, F. J. Bermejo, J. Lucas, and L. Uriarte, “Baseline Design of the ESS Bilbao Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP080, pp. 2704-2706.
[n] M. Zach et al., “Status of the H Extraction Program at TRIUMF”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F6-11, pp. 368-371.
[n] H. J. Qian, M. Gross, M. Krasilnikov, A. Oppelt, and F. Stephan, “Investigation of High Repetition Rate Femtosecond Electron Diffraction at PITZ”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3727-3729. doi:10.18429/JACoW-IPAC2017-THPAB017
[n] A. Grassellino, L. D. Cooley, C. M. Ginsburg, A. Romanenko, A. M. Rowe, and V. P. Yakovlev, “High Q0 in Superconducting Niobium Cavities: Progress at FNAL and Future Plans”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC115, pp. 2492-2494.
[n] R. T. Avery, G. R. Lamertson, and C. D. Pike, “Printed-Circuit Steering Coils”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 885-887.
[n] D. Barni, C. Gesmundo, C. Pagani, and G. Varisco, “Beta Tunable 700 MHz Insert with Natural Convection Precooling”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP014, pp. 422-426.
[n] R. Li, “Applications of the Cancellation Effect in the CSR Studies”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAC009, pp. 208-210.
[n] L. Sanchez et al., “Design, Fabrication and Tests of the Second Prototype of the Double-Length CLIC PETS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3887-3889. doi:10.18429/JACoW-IPAC2014-THPRI052
[n] R. A. Bosch, J. J. Bisognano, and K. J. Kleman, “Robinson Modes at Aladdin”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB062, pp. 3147-3149.
[n] T. Miyajima et al., “Present Status of Photon Factory Advanced Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB015, pp. 860-862.
[n] M. A. Clarke-Gayther, “Slow-Wave Electrode Structures for the ESS 2.5 MeV Fast Chopper”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG022, pp. 1473-1475.
[n] S. A. Antipov, K. Carlson, A. Valishev, S. J. Wesseln, and R. Castellotti, “Design of Octupole Channel for Integrable Optics Test Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1731-1733. doi:10.18429/JACoW-IPAC2016-TUPOR030
[n] J. Ferm?®, G. Gendreau, and P. Yvon, “Injection and Ejection Systems for the GANIL SSC”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-10, pp. 260-263.
[n] S. C. Joshi et al., “R&D Activities on High Intensity Superconducting Proton Linac at RRCAT”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPLB05, pp. 819-821.
[n] Y. K. Lin et al., “Statistical Analysis Package for the Opearion Monitoring at the TLS”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4019-4021. doi:10.18429/JACoW-IPAC2016-THPOW035
[n] J. B. Yu, He. He, L. Kang, H. Qu, and Y. Q. Zou, “Development of Beam Collimators for the 1.6 GeV Rapid Cycling Synchrotron of CSNS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI031, pp. 3364-3366.
[n] M. Aiba et al., “Exploring the Potential of the Swiss Light Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1554-1556. doi:10.18429/JACoW-IPAC2019-TUPGW066
[n] F. Obier, W. Decking, M. H??ning, and J. Wortmann, “Fast Kicker System for European XFEL Beam Distribution”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 353-356. doi:10.18429/JACoW-FEL2019-WEP013
[n] V. V. Danilov et al., “Accumulation of High Intensity Beam and First Observations of Instabilities in the SNS Accumulator Ring”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper TUAX01, pp. 59-63.
[n] J. Norem, L. Bandura, E. Black, M. A. C. Cummings, and D. Errede, “Measurements of Beam Driven Hydrodynamic Turbulence”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAE026, pp. 1999-2001.
[n] R. Li, C. L. Bohn, and J. J. Bisognano, “Shielding Transient Self-Interaction of a Bunch Entering a Circle from a Straight Path”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2V023, pp. 1641-1643.
[n] O. Chubenko and A. Afanasev, “Modeling of Photoemission and Electron Spin Polarization from NEA GaAs Photocathodes”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1556-1559. doi:10.18429/JACoW-IPAC2015-TUPWA059
[n] G. L. Orlandi et al., “First Experimental Results of the Commissioning of the SwissFEL Wire-Scanners”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 388-392. doi:10.18429/JACoW-IBIC2017-WEPCC16
[n] S. Henderson et al., “Beam Dump Window Design for the Spallation Neutron Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG020, pp. 1467-1469.
[n] U. Schryber et al., “Upgrading the PSI Accelerator Facility for High Intensity Operation”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 173-176.
[n] G. Caryotakis, E. Jongewaard, C. Pearson, R. M. Phillips, D. Sprehn, and A. Vlieks, “The Next Linear Collider Klystron Development Program”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3A06, pp. 2063-2065.
[n] V. Serriere and J. Jacob, “Non-Linear Longitudinal Beam Dynamics with Harmonic RF Systems for Bunch Lengthening”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG008, pp. 3192-3194.
[n] P. Gmaj, G. Bellomo, L. Calabretta, and D. Rifuggiato, “Final Mapping of the LNS Superconducting Cyclotron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2301-2304.
[n] M. Eguiraun et al., “MAX IV BioMAX Beamline Control System: From Commissioning Into User Operation”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 318-322. doi:10.18429/JACoW-ICALEPCS2017-TUMPL08
[n] F. Chautard et al., “GANIL Operation Status and Upgrade of SPIRAL1”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper PO02, pp. 51-53.
[n] S. Adam, “The Isochronism in the SIN 590-MeV Ring Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-16, pp. 283-286.
[n] H. J. Qian et al., “Alkali Cathode Testing for LCLS-II at APEX”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 280-284. doi:10.18429/JACoW-FEL2015-MOD03
[n] E. Wright et al., “Development of a 10-MW, L-Band, Multiple-Beam Klystron for TESLA”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE029, pp. 1144-1146.
[n] N. Cheng et al., “Design and Tests of an Accelerator Module for Linear Induction Accelerator (LIA)”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1783-1785.
[n] S.-H. Wang, J. Corlett, S. M. Lidia, J. Staples, and A. Zholents, “Flat Beam Production in Low Energy Injectors”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG011, pp. 3198-3200.
[n] M. Korostelev, A. F. Grant, J. Lucas, O. B. Malyshev, and A. Wolski, “Beam Coupling Impedance in the ILC Damping Rings”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP056, pp. 670-672.
[n] H. Gaus, B. Nguyen, B. Comiskey, E. Loftin, and J. Bradley III, “Review of known extraction kickers”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3587-3590. doi:10.18429/JACoW-IPAC2024-THPR39
[n] D. K. Olsen et al., “Recent Developments at the Holifield Heavy Ion Research Facility”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 452-455.
[n] G. Jackson, “Alternative Bunch Formation for the Tevatron Collider”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB069, pp. 3159-3161.
[n] J. C. Chang, J. R. Chen, and C. Y. Liu, “Air Temperature Control Improvement for the Storage Ring Tunnel”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG025, pp. 1482-1484.
[n] R. Benaroya, T. K. Khoe, and W. J. Ramler, “Superconducting Plates as Magnetic Shields”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper B-010, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Doleans et al., “Status Report on the NSCL RF Fragment Separator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS039, pp. 3585-3587.
- W. Andreazza et al., “The Design, Construction and Operation of the Beam Instrumentation for the High Intensity and Energy Upgrade of ISOLDE at CERN”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 101-104.
- R. Enparantza, F. J. Bermejo, J. Lucas, and L. Uriarte, “Baseline Design of the ESS Bilbao Linac”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP080, pp. 2704-2706.
- M. Zach et al., “Status of the H Extraction Program at TRIUMF”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F6-11, pp. 368-371.
- H. J. Qian, M. Gross, M. Krasilnikov, A. Oppelt, and F. Stephan, “Investigation of High Repetition Rate Femtosecond Electron Diffraction at PITZ”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3727-3729.
- A. Grassellino, L. D. Cooley, C. M. Ginsburg, A. Romanenko, A. M. Rowe, and V. P. Yakovlev, “High Q0 in Superconducting Niobium Cavities: Progress at FNAL and Future Plans”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC115, pp. 2492-2494.
- R. T. Avery, G. R. Lamertson, and C. D. Pike, “Printed-Circuit Steering Coils”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 885-887.
- D. Barni, C. Gesmundo, C. Pagani, and G. Varisco, “Beta Tunable 700 MHz Insert with Natural Convection Precooling”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper WEP014, pp. 422-426.
- R. Li, “Applications of the Cancellation Effect in the CSR Studies”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOAC009, pp. 208-210.
- L. Sanchez et al., “Design, Fabrication and Tests of the Second Prototype of the Double-Length CLIC PETS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3887-3889.
- R. A. Bosch, J. J. Bisognano, and K. J. Kleman, “Robinson Modes at Aladdin”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB062, pp. 3147-3149.
- T. Miyajima et al., “Present Status of Photon Factory Advanced Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB015, pp. 860-862.
- M. A. Clarke-Gayther, “Slow-Wave Electrode Structures for the ESS 2.5 MeV Fast Chopper”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG022, pp. 1473-1475.
- S. A. Antipov, K. Carlson, A. Valishev, S. J. Wesseln, and R. Castellotti, “Design of Octupole Channel for Integrable Optics Test Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1731-1733.
- J. Ferm?®, G. Gendreau, and P. Yvon, “Injection and Ejection Systems for the GANIL SSC”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-10, pp. 260-263.
- S. C. Joshi et al., “R&D Activities on High Intensity Superconducting Proton Linac at RRCAT”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPLB05, pp. 819-821.
- Y. K. Lin et al., “Statistical Analysis Package for the Opearion Monitoring at the TLS”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4019-4021.
- J. B. Yu, He. He, L. Kang, H. Qu, and Y. Q. Zou, “Development of Beam Collimators for the 1.6 GeV Rapid Cycling Synchrotron of CSNS”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI031, pp. 3364-3366.
- M. Aiba et al., “Exploring the Potential of the Swiss Light Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1554-1556.
- F. Obier, W. Decking, M. H??ning, and J. Wortmann, “Fast Kicker System for European XFEL Beam Distribution”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 353-356.
- V. V. Danilov et al., “Accumulation of High Intensity Beam and First Observations of Instabilities in the SNS Accumulator Ring”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper TUAX01, pp. 59-63.
- J. Norem, L. Bandura, E. Black, M. A. C. Cummings, and D. Errede, “Measurements of Beam Driven Hydrodynamic Turbulence”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAE026, pp. 1999-2001.
- R. Li, C. L. Bohn, and J. J. Bisognano, “Shielding Transient Self-Interaction of a Bunch Entering a Circle from a Straight Path”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2V023, pp. 1641-1643.
- O. Chubenko and A. Afanasev, “Modeling of Photoemission and Electron Spin Polarization from NEA GaAs Photocathodes”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1556-1559.
- G. L. Orlandi et al., “First Experimental Results of the Commissioning of the SwissFEL Wire-Scanners”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 388-392.
- S. Henderson et al., “Beam Dump Window Design for the Spallation Neutron Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG020, pp. 1467-1469.
- U. Schryber et al., “Upgrading the PSI Accelerator Facility for High Intensity Operation”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 173-176.
- G. Caryotakis, E. Jongewaard, C. Pearson, R. M. Phillips, D. Sprehn, and A. Vlieks, “The Next Linear Collider Klystron Development Program”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP3A06, pp. 2063-2065.
- V. Serriere and J. Jacob, “Non-Linear Longitudinal Beam Dynamics with Harmonic RF Systems for Bunch Lengthening”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPG008, pp. 3192-3194.
- P. Gmaj, G. Bellomo, L. Calabretta, and D. Rifuggiato, “Final Mapping of the LNS Superconducting Cyclotron”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2301-2304.
- M. Eguiraun et al., “MAX IV BioMAX Beamline Control System: From Commissioning Into User Operation”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 318-322.
- F. Chautard et al., “GANIL Operation Status and Upgrade of SPIRAL1”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper PO02, pp. 51-53.
- S. Adam, “The Isochronism in the SIN 590-MeV Ring Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-16, pp. 283-286.
- H. J. Qian et al., “Alkali Cathode Testing for LCLS-II at APEX”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 280-284.
- E. Wright et al., “Development of a 10-MW, L-Band, Multiple-Beam Klystron for TESLA”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAE029, pp. 1144-1146.
- N. Cheng et al., “Design and Tests of an Accelerator Module for Linear Induction Accelerator (LIA)”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1783-1785.
- S.-H. Wang, J. Corlett, S. M. Lidia, J. Staples, and A. Zholents, “Flat Beam Production in Low Energy Injectors”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPG011, pp. 3198-3200.
- M. Korostelev, A. F. Grant, J. Lucas, O. B. Malyshev, and A. Wolski, “Beam Coupling Impedance in the ILC Damping Rings”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP056, pp. 670-672.
- H. Gaus, B. Nguyen, B. Comiskey, E. Loftin, and J. Bradley III, “Review of known extraction kickers”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR39, pp. 3587-3590.
- D. K. Olsen et al., “Recent Developments at the Holifield Heavy Ion Research Facility”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 452-455.
- G. Jackson, “Alternative Bunch Formation for the Tevatron Collider”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB069, pp. 3159-3161.
- J. C. Chang, J. R. Chen, and C. Y. Liu, “Air Temperature Control Improvement for the Storage Ring Tunnel”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG025, pp. 1482-1484.
- R. Benaroya, T. K. Khoe, and W. J. Ramler, “Superconducting Plates as Magnetic Shields”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper B-010, pp. XX-XX.
Back to search