Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Hanaki et al., “Injector System for X-ray FEL at SPring-8”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC010, pp. 85-87.
[n] S.-K. Lee, B. H. Choi, K. R. Kim, HR. Lee, and B.-S. Park, “Characteristic Experimentations of Degrader and Scatterer at MC-50 Cyclotron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAP013, pp. 1356-1358.
[n] Yu. Maltseva and I. A. Morozov, “Model?¡-Dependent Accelerator Lattice Fit Based on BPM Data and Generating Functions”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3311-3313. doi:10.18429/JACoW-IPAC2016-THPMB036
[n] P. G. Barnes et al., “A Micro-Channel Plate Based Gas Ionization Profile Monitor with Shaping Field Electrodes for the ISIS H- Injector”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC147, pp. 1371-1373.
[n] S. Aumon, H. Damerau, and S. S. Gilardoni, “Optimization of the Position of the Radial Loop Pickups in the CERN PS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB042, pp. 2782-2784.
[n] R. Merl, F. Gallegos, C. Pillai, B. J. Sanchez, F. Shelley, and A. Steck, “A Multiwire Proportional Chamber System for Monitoring Low Momentum Beam in Accelerators”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB047, pp. 2515-2517.
[n] C. Hughes, N. Dover, Z. Najmudin, and P. A. Posocco, “Characterisation of Nitrogen Clusters and Gas Jet Targets Under Varied Nozzle Geometries”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPSM13, pp. 1412-1414.
[n] M. N. Polyanskiy, I. Ben-Zvi, I. Pogorelsky, V. Yakimenko, and Z. Najmudin, “Prospects for Proton Accelerators Driven by the Radiation Pressure from a Sub-PW CO2 Laser”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP154, pp. 379-381.
[n] R. J. Mathieson, D. Bayley, N. E. Farthing, I. S. K. Gardner, and A. Seville, “Improvements to ISIS RF Cavity Tuning”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC025, pp. 3332-3334.
[n] G. S. Eom, I. S. Hong, and Y. S. Hwang, “Development of DC Accelerator Ion Sources using Helicon Plasmas”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D061, pp. 825-827.
[n] A. Navitski, A. Prudnikava, and Y. Tamashevich, “Progress of R&D on SRF Cavities at DESY towards the ILC Performance Goal”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2499-2501. doi:10.18429/JACoW-IPAC2014-WEPRI011
[n] V. Yu. Zaslavsky et al., “Development of Powerful Long-Pulse Terahertz Band FELs Based on Linear Induction Accelerators”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 91-93. doi:10.18429/JACoW-FEL2019-TUP021
[n] S. Mishra, “Status of the Fermilab Recycler Ring”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE035, pp. 1091-1093.
[n] A. D. Palczewski, G. V. Eremeev, R. L. Geng, and C. E. Reece, “Quench Studies of Six High Temperature Nitrogen Doped 9 Cell Cavities for Use in the LCLS-II Baseline Prototype Cryo-module at Jefferson Laboratory”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3528-3531. doi:10.18429/JACoW-IPAC2015-WEPWI019
[n] M. R. W. North and A. H. Kershaw, “Real-Time Beam Loss Monitor Display Using FPGA Technology”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAP046, pp. 2914-2916.
[n] Yu. Maltseva, F. A. Emanov, A. V. Petrenko, and V. G. Prisekin, “Distributed Beam Loss Monitor Based on the Cherenkov Effect in Optical Fiber”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1004-1006. doi:10.18429/JACoW-IPAC2015-MOPTY034
[n] P. Savage, M. Aslaninejad, P. A. Posocco, J. K. Pozimski, A. P. Letchford, and S. Mishra, “Thermal Design of the FETS Chopper Beam Dump”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPMA05, pp. 303-305.
[n] C. E. Chen et al., “Experimental Studies on the Acceleration of Positive & Negative Ions with a Heavy Ion ISR RFQ”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP047L, pp. 2702-2705.
[n] A. D. Palczewski, R. L. Geng, and H. Tian, “Optimizing Centrifugal Barrel Polishing for Mirror Finish SRFCavity and Rf Tests at Jefferson Lab”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC094, pp. 2435-2437.
[n] H. Maesaka et al., “Performance of the RF Cavity BPM at XFEL/SPring-8 ``SACLA''”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THPA29, pp. 539-542.
[n] T. Suzuki, “Hamiltonian Formulation for Synchrobetatron Resonance Driven by Dispersion in RF Cavities”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2273-2276.
[n] M. Blaskiewicz et al., “Longitudinal Solitons in RHIC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB008, pp. 3029-3031.
[n] D. Sertore et al., “Experience on Design, Fabrication and Testing of a Large Grain ESS Medium Beta Prototype Cavity”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1027-1030. doi:10.18429/JACoW-IPAC2017-MOPVA068
[n] R. K. Kushwaha, “Ion-beam-induced astrochemistry: a new application of the Atomki-ECRIS”, presented at the ECRIS'22, Ahmedabad, India, Oct. 2022, paper FRT7AUCO22, unpublished.
[n] S. H. Kim et al., “Development and Management of the Modulator System for PLS-II 3.0 GeV Electron Linac”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD073, pp. 3683-3685.
[n] X. Sun and Y. Lin, “The Nonlinear Transverse RF Field Effects on the Beam Dynamics”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4033, pp. 842-844.
[n] P. Desire Valdor, A. Gerbershagen, and A. Latina, “Intrabeam scattering simulation with a novel hybrid-kinetic Monte Carlo method for linear accelerators”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 659-662. doi:10.18429/JACoW-LINAC2024-THPB014
[n] N. I. Her et al., “Design of The Superconducting Magnet Supporting Post for KSTAR Tokamak”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH476, pp. 773-775.
[n] P. Naisson et al., “State of the Art of Niobium Machining for SRF Applications”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 210-213. doi:10.18429/JACoW-SRF2019-MOP061
[n] A. M. Kozodaev et al., “Development and Construction of Experimental ADS at ITEP”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI110, pp. 2777-2779.
[n] P. Sjöblom, A. Milan-Otero, and A. G. Persson, “Multiplexer for the Em# Electrometer”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1548-1551. doi:10.18429/JACoW-ICALEPCS2017-THPHA070
[n] K. H. Gil, H. J. Choi, and J.-H. Lim, “Automatic Microbeam Focusing for X-Ray Microbeam Experiments at the 4B Beamline of Pohang Light Source-II”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 220-222. doi:10.18429/JACoW-IPAC2016-MOPMB057
[n] D. W. Posthuma de Boer and A. Pertica, “Thermal Simulations of Wire Profile Monitors in ISIS Extracted Proton Beamline 1”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 785-787. doi:10.18429/JACoW-IBIC2016-WEPG59
[n] M. Clausen, R. MacKenzie, R. Sass, H. Shoaee, G. White, and L. Yasukawa, “COSMIC - The SLAC Control System Migration Challenge”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAI001, pp. XX-XX.
[n] S. I. Inoue et al., “Beam Monitor System Controller for XFEL/SPring-8”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP069, pp. 534-536.
[n] A. Navitski, S. Lagotzky, G. Mueller, D. Reschke, and X. Singer, “Surface Roughness and Correlated Enhanced Field Emission Investigations of Electropolished Niobium Samples”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO045, pp. 316-320.
[n] C. C. Wilcox, B. Jones, A. Pertica, and R. E. Williamson, “An Investigation into the Behaviour of Residual Gas Ionisation Profile Monitors in the ISIS Extracted Beamline”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 807-810. doi:10.18429/JACoW-IBIC2016-WEPG68
[n] S. Heo, T. Hashimoto, J. H. Lee, Y. H. Park, K. Yoo, and C. Lim, “Beam Study of RFQ Cooler Buncher for EBIS Charge Breeder at RAON”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper WE2WH03, unpublished.
[n] J. Holma and M. J. Barnes, “Evaluation of Components for the High Precision Inductive Adder for the CLIC Damping Rings”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD076, pp. 3692-3694.
[n] A. Sery, “Ground Motion Studies with respect to Linac Performance”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TH205, pp. 621-625.
[n] H. J. Choi, M. S. Chae, J. H. Hong, H.-S. Kang, and S. J. Park, “Results Produced after Measuring PAL-ITF Beam Diagnostic Instruments”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2903-2905. doi:10.18429/JACoW-IPAC2014-THPRO021
[n] M. Bassetti and W. Scandale, “Limiting Effects of the Parasitic Sextupole Component in the CERN Large Hadron Collider”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2228-2231.
[n] S. A. Whitehead, P. G. Barnes, G. M. Cross, S. J. Payne, and A. Pertica, “Multi-Channeltron Based Profile Monitor at the ISIS Proton Synchrotron”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM007, pp. 106-110.
[n] A. J. Moss et al., “Commissioning of the MICE RF System”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2297-2299. doi:10.18429/JACoW-IPAC2014-WEPME020
[n] D. J. Adams, A. I. Borden, A. H. Kershaw, C. M. Warsop, and D. M. Wright, “Development of the ISIS Synchrotron Diagnostics”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP24C, pp. 1629-1631.
[n] V. P. Yakovlev, I. G. Gonin, T. N. Khabiboulline, and N. Solyak, “SC Crab Cavity with Reduced Transverse Size for the LHC Upgrade”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP064, pp. 975-977.
[n] H. Kashima, N. Araki, M. Ishizuka, T. Masuoka, H. Mukai, and O. Miyakawa, “Digital Control System of High Extensibility for KAGRA”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC090, pp. 794-797.
[n] J. Bisognano, J. R. Delayen, and L. Merminga, “Energy Stability in Recirculating, Energy-Recovering Linacs in the Presence of an FEL”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP012G, pp. 1012-1014.
[n] A. Pertica and S. J. Payne, “A Micro-Channel Plate Based RFA Electron Cloud Monitor for the ISIS Proton Synchrotron”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD88, pp. 512-514.
[n] D. M. Harryman and A. Pertica, “Online Total Ionisation Dosimeter (TID) Monitoring Using Semiconductor Based Radiation Sensors in the ISIS Proton Synchrotron”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 379-382. doi:10.18429/JACoW-IBIC2016-TUPG24
[n] J. K. Pozimski, M. Aslaninejad, N. Dover, Z. Najmudin, R. M. Nichols, and P. A. Posocco, “A Ready-to-use Application of Laser-Plasma Accelerators using Gabor Lenses”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPSM12, pp. 1409-1411.
[n] M. Boussoukaya, H. Bergeret, R. Chehab, B. Leblond, and J. Leduff, “High Emissivity Photocathodes”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 994-997.
[n] Y. Lin, “Low Energy Electron Linacs and Their Applications in China”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 7C002, pp. 890-893.
[n] M. Guijarro et al., “BLISS - Experiments Control for ESRF EBS Beamlines”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1060-1066. doi:10.18429/JACoW-ICALEPCS2017-WEBPL05
[n] M. Boussoukaya, M. Bergeret, R. Chehab, M. Franco, and B. Leblond, “Photoemission in Nanosecond and Picosecond Regimes Obtained from Macro and Micro Cathodes”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 325-328.
[n] N. M. Cook et al., “Spectral Broadening of Ions Accelerated by a Radiation Pressure Driven Shock”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC34, pp. 144-146.
[n] J. K. Sekutowicz and P. Kneisel, “Cryogenic Test of a Coaxial Coupling Scheme for Fundamental and Higher Order Modes in Superconducting Cavities”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP053, pp. 945-946.
[n] O. O. Andreassen, L. Arnaudon, I. T. Matasaho, and A. Rijllart, “Low Cost FFT Scope using LabVIEW cRIO and FPGA”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC095, pp. 801-804.
[n] V. D. Shemelin and M. Liepe, “Superconducting Multicell Cavity Design for the Energy Recovery Linac at Cornell”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP051, pp. 939-941.
[n] I. Hofmann and K. Beckert, “Resonance Crossing in the Presence of Space Charge”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2264-2267.
[n] P. Desire Valdor, S. Di Mitri, A. Gerbershagen, and A. Latina, “Benchmarking Intrabeam Scattering with RF-Track”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2333-2336. doi:10.18429/JACoW-IPAC2025-WEPS042
[n] P. Michelato et al., “An X-Ray Fluorescence Probe for Defect Detection in Superconducting 1.3 GHz Cavities”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP110, pp. 736-738.
[n] S. Ohnuma and R. L. Gluckstern, “Width of Nonlinear Difference Resonances”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2261-2264.
[n] G. M. Wang, M. A. Davidsaver, A. A. Derbenev, R. P. Fliller, Y. Hu, and T. V. Shaftan, “Top-off Tests and Controls Optimization”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2982-2984. doi:10.18429/JACoW-IPAC2016-WEPOW058
[n] W. J. Hoffert, G. Donica, H. Herman, and H. J. Varga, “The Radio Frequency System for the Indiana University Isochronous Separated Sector Cyclotron”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1265-1269.
[n] V. P. Yakovlev et al., “Improved Input and Output Couplers for SC Acceleration Structure”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP061, pp. 966-968.
[n] A. Gresele, M. Giaretta, A. Visentin, A. A. Sulimov, and J. H. Thie, “The Statistics of Industrial XFEL Cavities Fabrication at E.ZANON”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP034, pp. 180-182.
[n] Z. A. Conway et al., “Multi-Cell Reentrant Cavity Development and Testing At Cornell”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP047, pp. 930-932.
[n] A. Seville et al., “Progress on the ISIS Synchrotron Low Power RF System Upgrade”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI063, pp. 2839-2841.
[n] A. Navitski et al., “ILC-HiGrade Cavities as a Tool of Quality Control for European XFEL”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP043, pp. 212-215.
[n] M. Ishizuka, N. Araki, H. Kashima, and H. Mukai, “Developing of the Pulse Motor Controller Electronics for Running under Weak Radiation Environment”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC055, pp. 695-698.
[n] A. Latina, G. Rumolo, D. Schulte, and R. Tomas, “Feedback Studies”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN059, pp. 2841-2843.
[n] J. Gutekunst, F. Klumb, G. Kautzmann, H. M. Durand, and M. Sosin, “Continuous position estimation for the full remote alignment system of the High Luminosity LHC upgrade”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3337-3340. doi:10.18429/JACoW-IPAC2024-THPG36
[n] P. Trubacova et al., “Production and validation of the RF cooling damper for the LHC injection kickers”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1092-1095. doi:10.18429/JACoW-IPAC2024-TUPC39
[n] D. Meidlinger, E. P. Chojnacki, and H. Padamsee, “Vertical Test Results for Vertically Electropolished 1.3GHz 5-Cell Superconducting Cavities”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP049, pp. 936-938.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Hanaki et al., “Injector System for X-ray FEL at SPring-8”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC010, pp. 85-87.
- S.-K. Lee, B. H. Choi, K. R. Kim, HR. Lee, and B.-S. Park, “Characteristic Experimentations of Degrader and Scatterer at MC-50 Cyclotron”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAP013, pp. 1356-1358.
- Yu. Maltseva and I. A. Morozov, “Model?¡-Dependent Accelerator Lattice Fit Based on BPM Data and Generating Functions”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3311-3313.
- P. G. Barnes et al., “A Micro-Channel Plate Based Gas Ionization Profile Monitor with Shaping Field Electrodes for the ISIS H- Injector”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC147, pp. 1371-1373.
- S. Aumon, H. Damerau, and S. S. Gilardoni, “Optimization of the Position of the Radial Loop Pickups in the CERN PS”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB042, pp. 2782-2784.
- R. Merl, F. Gallegos, C. Pillai, B. J. Sanchez, F. Shelley, and A. Steck, “A Multiwire Proportional Chamber System for Monitoring Low Momentum Beam in Accelerators”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB047, pp. 2515-2517.
- C. Hughes, N. Dover, Z. Najmudin, and P. A. Posocco, “Characterisation of Nitrogen Clusters and Gas Jet Targets Under Varied Nozzle Geometries”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPSM13, pp. 1412-1414.
- M. N. Polyanskiy, I. Ben-Zvi, I. Pogorelsky, V. Yakimenko, and Z. Najmudin, “Prospects for Proton Accelerators Driven by the Radiation Pressure from a Sub-PW CO2 Laser”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP154, pp. 379-381.
- R. J. Mathieson, D. Bayley, N. E. Farthing, I. S. K. Gardner, and A. Seville, “Improvements to ISIS RF Cavity Tuning”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC025, pp. 3332-3334.
- G. S. Eom, I. S. Hong, and Y. S. Hwang, “Development of DC Accelerator Ion Sources using Helicon Plasmas”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D061, pp. 825-827.
- A. Navitski, A. Prudnikava, and Y. Tamashevich, “Progress of R&D on SRF Cavities at DESY towards the ILC Performance Goal”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2499-2501.
- V. Yu. Zaslavsky et al., “Development of Powerful Long-Pulse Terahertz Band FELs Based on Linear Induction Accelerators”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 91-93.
- S. Mishra, “Status of the Fermilab Recycler Ring”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE035, pp. 1091-1093.
- A. D. Palczewski, G. V. Eremeev, R. L. Geng, and C. E. Reece, “Quench Studies of Six High Temperature Nitrogen Doped 9 Cell Cavities for Use in the LCLS-II Baseline Prototype Cryo-module at Jefferson Laboratory”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3528-3531.
- M. R. W. North and A. H. Kershaw, “Real-Time Beam Loss Monitor Display Using FPGA Technology”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAP046, pp. 2914-2916.
- Yu. Maltseva, F. A. Emanov, A. V. Petrenko, and V. G. Prisekin, “Distributed Beam Loss Monitor Based on the Cherenkov Effect in Optical Fiber”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1004-1006.
- P. Savage, M. Aslaninejad, P. A. Posocco, J. K. Pozimski, A. P. Letchford, and S. Mishra, “Thermal Design of the FETS Chopper Beam Dump”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPMA05, pp. 303-305.
- C. E. Chen et al., “Experimental Studies on the Acceleration of Positive & Negative Ions with a Heavy Ion ISR RFQ”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP047L, pp. 2702-2705.
- A. D. Palczewski, R. L. Geng, and H. Tian, “Optimizing Centrifugal Barrel Polishing for Mirror Finish SRFCavity and Rf Tests at Jefferson Lab”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC094, pp. 2435-2437.
- H. Maesaka et al., “Performance of the RF Cavity BPM at XFEL/SPring-8 ``SACLA''”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper THPA29, pp. 539-542.
- T. Suzuki, “Hamiltonian Formulation for Synchrobetatron Resonance Driven by Dispersion in RF Cavities”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2273-2276.
- M. Blaskiewicz et al., “Longitudinal Solitons in RHIC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB008, pp. 3029-3031.
- D. Sertore et al., “Experience on Design, Fabrication and Testing of a Large Grain ESS Medium Beta Prototype Cavity”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1027-1030.
- R. K. Kushwaha, “Ion-beam-induced astrochemistry: a new application of the Atomki-ECRIS”, presented at the 25th International Workshop on ECR Ion Sources (ECRIS'22), Ahmedabad, India, Oct. 2022, paper FRT7AUCO22, unpublished.
- S. H. Kim et al., “Development and Management of the Modulator System for PLS-II 3.0 GeV Electron Linac”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD073, pp. 3683-3685.
- X. Sun and Y. Lin, “The Nonlinear Transverse RF Field Effects on the Beam Dynamics”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4033, pp. 842-844.
- P. Desire Valdor, A. Gerbershagen, and A. Latina, “Intrabeam scattering simulation with a novel hybrid-kinetic Monte Carlo method for linear accelerators”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 659-662.
- N. I. Her et al., “Design of The Superconducting Magnet Supporting Post for KSTAR Tokamak”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH476, pp. 773-775.
- P. Naisson et al., “State of the Art of Niobium Machining for SRF Applications”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 210-213.
- A. M. Kozodaev et al., “Development and Construction of Experimental ADS at ITEP”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI110, pp. 2777-2779.
- P. Sjöblom, A. Milan-Otero, and A. G. Persson, “Multiplexer for the Em# Electrometer”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1548-1551.
- K. H. Gil, H. J. Choi, and J.-H. Lim, “Automatic Microbeam Focusing for X-Ray Microbeam Experiments at the 4B Beamline of Pohang Light Source-II”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 220-222.
- D. W. Posthuma de Boer and A. Pertica, “Thermal Simulations of Wire Profile Monitors in ISIS Extracted Proton Beamline 1”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 785-787.
- M. Clausen, R. MacKenzie, R. Sass, H. Shoaee, G. White, and L. Yasukawa, “COSMIC - The SLAC Control System Migration Challenge”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAI001, pp. XX-XX.
- S. I. Inoue et al., “Beam Monitor System Controller for XFEL/SPring-8”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP069, pp. 534-536.
- A. Navitski, S. Lagotzky, G. Mueller, D. Reschke, and X. Singer, “Surface Roughness and Correlated Enhanced Field Emission Investigations of Electropolished Niobium Samples”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO045, pp. 316-320.
- C. C. Wilcox, B. Jones, A. Pertica, and R. E. Williamson, “An Investigation into the Behaviour of Residual Gas Ionisation Profile Monitors in the ISIS Extracted Beamline”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 807-810.
- S. Heo, T. Hashimoto, J. H. Lee, Y. H. Park, K. Yoo, and C. Lim, “Beam Study of RFQ Cooler Buncher for EBIS Charge Breeder at RAON”, presented at the 14th International Symposium of EBIS/T (EBIST2022), Whistler, BC, Canada, Jun. 2022, paper WE2WH03, unpublished.
- J. Holma and M. J. Barnes, “Evaluation of Components for the High Precision Inductive Adder for the CLIC Damping Rings”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD076, pp. 3692-3694.
- A. Sery, “Ground Motion Studies with respect to Linac Performance”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TH205, pp. 621-625.
- H. J. Choi, M. S. Chae, J. H. Hong, H.-S. Kang, and S. J. Park, “Results Produced after Measuring PAL-ITF Beam Diagnostic Instruments”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2903-2905.
- M. Bassetti and W. Scandale, “Limiting Effects of the Parasitic Sextupole Component in the CERN Large Hadron Collider”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2228-2231.
- S. A. Whitehead, P. G. Barnes, G. M. Cross, S. J. Payne, and A. Pertica, “Multi-Channeltron Based Profile Monitor at the ISIS Proton Synchrotron”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM007, pp. 106-110.
- A. J. Moss et al., “Commissioning of the MICE RF System”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2297-2299.
- D. J. Adams, A. I. Borden, A. H. Kershaw, C. M. Warsop, and D. M. Wright, “Development of the ISIS Synchrotron Diagnostics”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP24C, pp. 1629-1631.
- V. P. Yakovlev, I. G. Gonin, T. N. Khabiboulline, and N. Solyak, “SC Crab Cavity with Reduced Transverse Size for the LHC Upgrade”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP064, pp. 975-977.
- H. Kashima, N. Araki, M. Ishizuka, T. Masuoka, H. Mukai, and O. Miyakawa, “Digital Control System of High Extensibility for KAGRA”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC090, pp. 794-797.
- J. Bisognano, J. R. Delayen, and L. Merminga, “Energy Stability in Recirculating, Energy-Recovering Linacs in the Presence of an FEL”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP012G, pp. 1012-1014.
- A. Pertica and S. J. Payne, “A Micro-Channel Plate Based RFA Electron Cloud Monitor for the ISIS Proton Synchrotron”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD88, pp. 512-514.
- D. M. Harryman and A. Pertica, “Online Total Ionisation Dosimeter (TID) Monitoring Using Semiconductor Based Radiation Sensors in the ISIS Proton Synchrotron”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 379-382.
- J. K. Pozimski, M. Aslaninejad, N. Dover, Z. Najmudin, R. M. Nichols, and P. A. Posocco, “A Ready-to-use Application of Laser-Plasma Accelerators using Gabor Lenses”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPSM12, pp. 1409-1411.
- M. Boussoukaya, H. Bergeret, R. Chehab, B. Leblond, and J. Leduff, “High Emissivity Photocathodes”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 994-997.
- Y. Lin, “Low Energy Electron Linacs and Their Applications in China”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 7C002, pp. 890-893.
- M. Guijarro et al., “BLISS - Experiments Control for ESRF EBS Beamlines”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1060-1066.
- M. Boussoukaya, M. Bergeret, R. Chehab, M. Franco, and B. Leblond, “Photoemission in Nanosecond and Picosecond Regimes Obtained from Macro and Micro Cathodes”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 325-328.
- N. M. Cook et al., “Spectral Broadening of Ions Accelerated by a Radiation Pressure Driven Shock”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC34, pp. 144-146.
- J. K. Sekutowicz and P. Kneisel, “Cryogenic Test of a Coaxial Coupling Scheme for Fundamental and Higher Order Modes in Superconducting Cavities”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP053, pp. 945-946.
- O. O. Andreassen, L. Arnaudon, I. T. Matasaho, and A. Rijllart, “Low Cost FFT Scope using LabVIEW cRIO and FPGA”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC095, pp. 801-804.
- V. D. Shemelin and M. Liepe, “Superconducting Multicell Cavity Design for the Energy Recovery Linac at Cornell”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP051, pp. 939-941.
- I. Hofmann and K. Beckert, “Resonance Crossing in the Presence of Space Charge”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2264-2267.
- P. Desire Valdor, S. Di Mitri, A. Gerbershagen, and A. Latina, “Benchmarking Intrabeam Scattering with RF-Track”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS042, pp. 2333-2336.
- P. Michelato et al., “An X-Ray Fluorescence Probe for Defect Detection in Superconducting 1.3 GHz Cavities”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP110, pp. 736-738.
- S. Ohnuma and R. L. Gluckstern, “Width of Nonlinear Difference Resonances”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2261-2264.
- G. M. Wang, M. A. Davidsaver, A. A. Derbenev, R. P. Fliller, Y. Hu, and T. V. Shaftan, “Top-off Tests and Controls Optimization”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2982-2984.
- W. J. Hoffert, G. Donica, H. Herman, and H. J. Varga, “The Radio Frequency System for the Indiana University Isochronous Separated Sector Cyclotron”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1265-1269.
- V. P. Yakovlev et al., “Improved Input and Output Couplers for SC Acceleration Structure”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP061, pp. 966-968.
- A. Gresele, M. Giaretta, A. Visentin, A. A. Sulimov, and J. H. Thie, “The Statistics of Industrial XFEL Cavities Fabrication at E.ZANON”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP034, pp. 180-182.
- Z. A. Conway et al., “Multi-Cell Reentrant Cavity Development and Testing At Cornell”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP047, pp. 930-932.
- A. Seville et al., “Progress on the ISIS Synchrotron Low Power RF System Upgrade”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI063, pp. 2839-2841.
- A. Navitski et al., “ILC-HiGrade Cavities as a Tool of Quality Control for European XFEL”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP043, pp. 212-215.
- M. Ishizuka, N. Araki, H. Kashima, and H. Mukai, “Developing of the Pulse Motor Controller Electronics for Running under Weak Radiation Environment”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC055, pp. 695-698.
- A. Latina, G. Rumolo, D. Schulte, and R. Tomas, “Feedback Studies”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN059, pp. 2841-2843.
- J. Gutekunst, F. Klumb, G. Kautzmann, H. M. Durand, and M. Sosin, “Continuous position estimation for the full remote alignment system of the High Luminosity LHC upgrade”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG36, pp. 3337-3340.
- P. Trubacova et al., “Production and validation of the RF cooling damper for the LHC injection kickers”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC39, pp. 1092-1095.
- D. Meidlinger, E. P. Chojnacki, and H. Padamsee, “Vertical Test Results for Vertically Electropolished 1.3GHz 5-Cell Superconducting Cavities”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP049, pp. 936-938.
Back to search