Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. Spickermann, M. J. Borden, C. S. Feigerle, R. J. Macek, R. W. Shaw, and I. Sugai, “Comparison of Graphite and Diamond Structured Carbon Stripper Foils under Operational Conditions at the Los Alamos PSR”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper TUAZ05, pp. 112-116.
[n] E. Lee et al., “Lessons learned from hardware failure during HL-LHC AUP cabling”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2891-2894. doi:10.18429/JACoW-IPAC2024-WEPS80
[n] J. Delayen, T. Allison, C. Hovater, J. Musson, and T. Plawski, “Development of a Digital Self-Excited Loop for Field Control in High-Q Superconducting Cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP45, pp. XX-XX.
[n] S. G. Tantawi and V. Dolgashev, “2D Simulation of High-Efficiency Cross-Field RF Power Sources”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THA06, pp. 748-750.
[n] M. Kay, A. Alexander, R. Thornton, C. Taylor, and J. Lewellen, “Monte Carlo estimation of emittance growth during injection into the LANSCE PSR”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3583-3586. doi:10.18429/JACoW-IPAC2024-THPR38
[n] M. Parise, J. Bernardini, and D. Passarelli, “Niobium to Titanium Electron Beam Welding for SRF Cavities”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 515-518. doi:10.18429/JACoW-LINAC2022-TUPOGE13
[n] L. Thiele et al., “Beam loading for counter-rotating high-intensity beams in the Muon collider”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 714-717. doi:10.18429/JACoW-IPAC2025-MOPS046
[n] O. Grimm, V. Balandin, H. Delsim-Hashemi, N. Golubeva, and J. Rossbach, “Transverse Electron Beam Size Effect on the Bunch Profile Determination with Coherent Radiation Diagnostics”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC030, pp. 1113-1115.
[n] J. K. Pozimski et al., “Beam Diagnostics at the RAL Front-End Test Stand -- First Results and New Ideas”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGF07, pp. 458-458.
[n] Y. Watanabe, “Suppression Scheme of COD Variation Caused by Switching Ripple in J-PARC 3GeV Dipole Magnet Power Supply”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD063, pp. 3242-3244.
[n] Y. Sun et al., “Influence of environmental parameters on calibration drift in superconducting RF cavities”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 331-334. doi:10.18429/JACoW-LINAC2024-TUPB005
[n] S. T. Boogert et al., “Pyg4ometry : A Tool to Create Geometries for Geant4, BDSIM, G4Beamline and FLUKA for Particle Loss and Energy Deposit Studies”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3244-3247. doi:10.18429/JACoW-IPAC2019-WEPTS054
[n] J. Niedziela and T. D, “Using Sequencing to Improve Operational Efficiency and Reliability”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper ROPB01, pp. 689-691.
[n] K. Seiya, R. Sharankova, D. Jones, and M. Mwaniki, “Study of beam evolution along the Fermilab 400 MeV linac”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL122, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- T. Spickermann, M. J. Borden, C. S. Feigerle, R. J. Macek, R. W. Shaw, and I. Sugai, “Comparison of Graphite and Diamond Structured Carbon Stripper Foils under Operational Conditions at the Los Alamos PSR”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper TUAZ05, pp. 112-116.
- E. Lee et al., “Lessons learned from hardware failure during HL-LHC AUP cabling”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS80, pp. 2891-2894.
- J. Delayen, T. Allison, C. Hovater, J. Musson, and T. Plawski, “Development of a Digital Self-Excited Loop for Field Control in High-Q Superconducting Cavities”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP45, pp. XX-XX.
- S. G. Tantawi and V. Dolgashev, “2D Simulation of High-Efficiency Cross-Field RF Power Sources”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THA06, pp. 748-750.
- M. Kay, A. Alexander, R. Thornton, C. Taylor, and J. Lewellen, “Monte Carlo estimation of emittance growth during injection into the LANSCE PSR”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR38, pp. 3583-3586.
- M. Parise, J. Bernardini, and D. Passarelli, “Niobium to Titanium Electron Beam Welding for SRF Cavities”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 515-518.
- L. Thiele et al., “Beam loading for counter-rotating high-intensity beams in the Muon collider”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS046, pp. 714-717.
- O. Grimm, V. Balandin, H. Delsim-Hashemi, N. Golubeva, and J. Rossbach, “Transverse Electron Beam Size Effect on the Bunch Profile Determination with Coherent Radiation Diagnostics”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC030, pp. 1113-1115.
- J. K. Pozimski et al., “Beam Diagnostics at the RAL Front-End Test Stand -- First Results and New Ideas”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGF07, pp. 458-458.
- Y. Watanabe, “Suppression Scheme of COD Variation Caused by Switching Ripple in J-PARC 3GeV Dipole Magnet Power Supply”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD063, pp. 3242-3244.
- Y. Sun et al., “Influence of environmental parameters on calibration drift in superconducting RF cavities”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 331-334.
- S. T. Boogert et al., “Pyg4ometry : A Tool to Create Geometries for Geant4, BDSIM, G4Beamline and FLUKA for Particle Loss and Energy Deposit Studies”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3244-3247.
- J. Niedziela and T. D, “Using Sequencing to Improve Operational Efficiency and Reliability”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper ROPB01, pp. 689-691.
- K. Seiya, R. Sharankova, D. Jones, and M. Mwaniki, “Study of beam evolution along the Fermilab 400 MeV linac”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL122, unpublished.
Back to search