Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Qiang, R. D. Ryne, T. Sen, and M. Xiao, “Macroparticle Simulations of Antiproton Lifetime at 150 GeV in the Tevatron”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB057, pp. 3401-3403.
[n] A. Vergara-Fern?índez et al., “Software Applications for the Commissioning of the LHC Superconducting Circuits”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP018, pp. XX-XX.
[n] N. Barov, R. H. Miller, and D. J. Newsham, “Construction and Testing of the Dual Slot Resonance Linac”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPSM14, pp. 1415-1417.
[n] B. Sukhina et al., “Projects of an Electron Cooling Systems at an Energy of Electrons of 35 and 300 keV for IMP Lanzou, China”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP7A07, pp. 2480-2482.
[n] J. Y. Zou et al., “Application of Libera Brilliance Single Pass at NSRL Linac BPM System”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC115, pp. 1284-1286.
[n] P. Bertrand and R. Ferdinand, “SPIRAL2 Accelerator Construction Progress”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TH2A02, pp. 773-777.
[n] R. E. Laxdal et al., “Initial Operating Experience with the Auxiliary Accelerating Cavity for the TRIUMF Cyclotron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 810-813.
[n] A. Yamaguchi, “Development of C6+ Laser Ion Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS020, pp. 3460-3462.
[n] H. Padamsee, E. Frick, W. Hartung, R. Kahn, R. Noer, and C. Reece, “Field Emission Studies in Superconducting Cavities”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1824-1827.
[n] F. Koechlin and B. Bonin, “Parametrisation of the Niobium Thermal Conductivity in the Superconducting State”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F24, pp. 665-669.
[n] H. Fitze, M. Bopp, and H. Frei, “Development of a New High Power Cavity for the 590 MeV Ring Cyclotron at PSI”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP58, pp. 795-797.
[n] R. Ganter et al., “Status of Athos, the Soft X-Ray FEL Line of SwissFEL”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 753-756. doi:10.18429/JACoW-FEL2019-THP085
[n] M. Martino, A. Beloglazov, V. Nassisi, and V. Stagno, “Experimental Characterisations of the Electron Beams Induced by Excimer Lasers on A1 Targets”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1474-1477.
[n] R. Tikhoplav, A. Melissinos, N. Barov, and J. Santucci, “Laser Acceleration of Electrons”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI074, pp. 984-985.
[n] J. L. Bailey, T. W. Buffington, and B. X. Yang, “A Wire Scanner Design for Electron Beam Profile Measurement in the Linac Coherent Light Source Undulator”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT065, pp. 3667-3669.
[n] F. Zimmermann et al., “The Large Hadron-Electron Collider (LHeC) at the LHC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR1PBC05, pp. 4233-4235.
[n] P. Bricault, “Tank1 of the ISAC-DTL Linac”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA66, pp. 3540-3542.
[n] B. G. Oh et al., “Micro-mover Development and Test in the PAL-XFEL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 229-231. doi:10.18429/JACoW-IPAC2016-MOPMR001
[n] F. Lenkszus and R. Laird, “A Stable Phase Reference for the APS Short-Pulse X-Ray Project”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP086, pp. 4159-4161.
[n] L. Praestegaard et al., “The Booster for the Canadian Light Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH117, pp. 3951-3953.
[n] T. Satogata et al., “RHIC BPM System Modifications and Performance”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT028, pp. 2021-2023.
[n] V. D. Elvira, V. I. Balbekov, P. Lebrun, and P. Spentzouris, “GEANT4 Simulation and Theoretical Studies of a Helical Cooling Channel”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH083, pp. 3873-3875.
[n] V. D. Elvira, V. I. Balbekov, P. Lebrun, J-M. Rey, P. Spentzouris, and E. L. Black, “Double Field Flip Cooling Channel for the Neutrino Factory”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH082, pp. 3870-3872.
[n] P. Puzo, J. Buon, J. Jeanjean, F. Le Diberder, and V. Lepeltier, “First Results of the Orsay Beam Size Monitor for the Final Focus Test Beam”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 31-34.
[n] K. Halbach, E. Hoyer, S. Marks, D. Plate, and D. Shuman, “CSEM-Steel Hybrid Wiggler/Undulator Magnetic Field Studies”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3640-3643.
[n] E. L. Wright et al., “Modeling and Design of High-Power Inductive Output Tubes”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU4RAC03, pp. 767-769.
[n] M. S. de Jong, “Producing Medical Isotopes using X-rays”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THXA01, pp. 3177-3179.
[n] Z. A. Conway et al., “Reduced-beta Cavities for High-intensity Compact Accelerators”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPLB07, pp. 458-460.
[n] Y. W. An and S. Wang, “Application of Orbit Response Matrix Method at CSNS/RCS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS011, pp. 2505-2507.
[n] G. M. Arbique, B. G. Chidley, M. S. de Jong, G. E. McMichael, and J. Y. Sheikh, “Beam Performance and Measurements on the RFQ1 Accelerator”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH433, pp. 677-679.
[n] S. O. Schriber and V. Andreev, “Design of a 10 MHz Heavy Ion RFQ for a RIA Post Accelerator”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH149, pp. 1370-1372.
[n] R. M. Silzer, R. Berg, J. C. Bergstrom, L. Dallin, X. Shen, and J. M. Vogt, “Injection System for the Canadian Light Source”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF008, pp. 2272-2274.
[n] L. Zeng et al., “The Beam-Based Alignment Simulation and Preliminary Experiment at SXFEL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1804-1807. doi:10.18429/JACoW-IPAC2019-TUPRB054
[n] I. Miura et al., “A High Energy Version of the RCNP Ring Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper N04, pp. 579-582.
[n] X. Wu et al., “The Design of the Isochronous and Achromatic Charge-Stripping Sections for the Rare Isotope Accelerator (RIA)”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE093, pp. 1211-1213.
[n] Q. Zhao, V. Andreev, F. Marti, S. O. Schriber, X. Wu, and R. C. York, “Design Studies of the Reaccelerator RFQ at NSCL”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS054, pp. 1772-1774.
[n] S. Kwiatkowski et al., “HOM Dampers for ALS Storage Ring RF Cavities”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB023, pp. 1240-1242.
[n] J. E. Spencer, “Some Uses of REPMM's in Storage Rings and Colliders”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3666-3669.
[n] D. E. Johnson and M. Xiao, “The Concept Design of a New Transfer Line from Booster to Recycler for the Fermilab Proton Plan Phase 2 Campaign”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS038, pp. 1727-1729.
[n] W. Booth, E. B. Blanco Vinuela, B. Bradu, L. Gomez Palacin, M. Quilichini, and D. Willeman, “Re-Engineering Control Systems using Automatic Generation Tools and Process Simulation: the LHC Water Cooling Case”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC076, pp. 1242-1245.
[n] A. Jansson, P. Lebrun, and J. T. Volk, “Beta Function Measurement in the Tevatron Using Quadrupole Gradient Modulation”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT033, pp. 2272-2274.
[n] J. Corbett, R. Hettel, D. Keeley, I. Linscott, and J. Sebek, “Algorithms for Orbit Control on SPEAR”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1583-1586.
[n] A. S. Raja Rao, “Status of SRS INDUS-2”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6A003, pp. 641-644.
[n] M. Therasse et al., “First HIE-ISOLDE Cryo-module Assembly at CERN”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB106, pp. 874-878.
[n] S. D. Holmes, “Project X: A Multi-MW Proton Source at Fermilab”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUYRA01, pp. 1299-1303.
[n] S. C. Mun et al., “Study of Geant4 Simulation for Cyclotron Radioisotope Production in Various Target Size”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 105-107. doi:10.18429/JACoW-Cyclotrons2016-MOP20
[n] J. Hu, C.-K. Min, H. Heo, and Y. J. Park, “Extension of reference tracking method to reduce RF amplitude drift in particle accelerators”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 736-738. doi:10.18429/JACoW-LINAC2024-THPB050
For LaTeX
Use Complete Form
For BibTeX
References
- J. Qiang, R. D. Ryne, T. Sen, and M. Xiao, “Macroparticle Simulations of Antiproton Lifetime at 150 GeV in the Tevatron”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB057, pp. 3401-3403.
- A. Vergara-Fern?índez et al., “Software Applications for the Commissioning of the LHC Superconducting Circuits”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP018, pp. XX-XX.
- N. Barov, R. H. Miller, and D. J. Newsham, “Construction and Testing of the Dual Slot Resonance Linac”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPSM14, pp. 1415-1417.
- B. Sukhina et al., “Projects of an Electron Cooling Systems at an Energy of Electrons of 35 and 300 keV for IMP Lanzou, China”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP7A07, pp. 2480-2482.
- J. Y. Zou et al., “Application of Libera Brilliance Single Pass at NSRL Linac BPM System”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC115, pp. 1284-1286.
- P. Bertrand and R. Ferdinand, “SPIRAL2 Accelerator Construction Progress”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TH2A02, pp. 773-777.
- R. E. Laxdal et al., “Initial Operating Experience with the Auxiliary Accelerating Cavity for the TRIUMF Cyclotron”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 810-813.
- A. Yamaguchi, “Development of C6+ Laser Ion Source”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS020, pp. 3460-3462.
- H. Padamsee, E. Frick, W. Hartung, R. Kahn, R. Noer, and C. Reece, “Field Emission Studies in Superconducting Cavities”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1824-1827.
- F. Koechlin and B. Bonin, “Parametrisation of the Niobium Thermal Conductivity in the Superconducting State”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95F24, pp. 665-669.
- H. Fitze, M. Bopp, and H. Frei, “Development of a New High Power Cavity for the 590 MeV Ring Cyclotron at PSI”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP58, pp. 795-797.
- R. Ganter et al., “Status of Athos, the Soft X-Ray FEL Line of SwissFEL”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 753-756.
- M. Martino, A. Beloglazov, V. Nassisi, and V. Stagno, “Experimental Characterisations of the Electron Beams Induced by Excimer Lasers on A1 Targets”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1474-1477.
- R. Tikhoplav, A. Melissinos, N. Barov, and J. Santucci, “Laser Acceleration of Electrons”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI074, pp. 984-985.
- J. L. Bailey, T. W. Buffington, and B. X. Yang, “A Wire Scanner Design for Electron Beam Profile Measurement in the Linac Coherent Light Source Undulator”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT065, pp. 3667-3669.
- F. Zimmermann et al., “The Large Hadron-Electron Collider (LHeC) at the LHC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR1PBC05, pp. 4233-4235.
- P. Bricault, “Tank1 of the ISAC-DTL Linac”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA66, pp. 3540-3542.
- B. G. Oh et al., “Micro-mover Development and Test in the PAL-XFEL”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 229-231.
- F. Lenkszus and R. Laird, “A Stable Phase Reference for the APS Short-Pulse X-Ray Project”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP086, pp. 4159-4161.
- L. Praestegaard et al., “The Booster for the Canadian Light Source”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH117, pp. 3951-3953.
- T. Satogata et al., “RHIC BPM System Modifications and Performance”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT028, pp. 2021-2023.
- V. D. Elvira, V. I. Balbekov, P. Lebrun, and P. Spentzouris, “GEANT4 Simulation and Theoretical Studies of a Helical Cooling Channel”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH083, pp. 3873-3875.
- V. D. Elvira, V. I. Balbekov, P. Lebrun, J-M. Rey, P. Spentzouris, and E. L. Black, “Double Field Flip Cooling Channel for the Neutrino Factory”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH082, pp. 3870-3872.
- P. Puzo, J. Buon, J. Jeanjean, F. Le Diberder, and V. Lepeltier, “First Results of the Orsay Beam Size Monitor for the Final Focus Test Beam”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 31-34.
- K. Halbach, E. Hoyer, S. Marks, D. Plate, and D. Shuman, “CSEM-Steel Hybrid Wiggler/Undulator Magnetic Field Studies”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3640-3643.
- E. L. Wright et al., “Modeling and Design of High-Power Inductive Output Tubes”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU4RAC03, pp. 767-769.
- M. S. de Jong, “Producing Medical Isotopes using X-rays”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THXA01, pp. 3177-3179.
- Z. A. Conway et al., “Reduced-beta Cavities for High-intensity Compact Accelerators”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPLB07, pp. 458-460.
- Y. W. An and S. Wang, “Application of Orbit Response Matrix Method at CSNS/RCS”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS011, pp. 2505-2507.
- G. M. Arbique, B. G. Chidley, M. S. de Jong, G. E. McMichael, and J. Y. Sheikh, “Beam Performance and Measurements on the RFQ1 Accelerator”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH433, pp. 677-679.
- S. O. Schriber and V. Andreev, “Design of a 10 MHz Heavy Ion RFQ for a RIA Post Accelerator”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH149, pp. 1370-1372.
- R. M. Silzer, R. Berg, J. C. Bergstrom, L. Dallin, X. Shen, and J. M. Vogt, “Injection System for the Canadian Light Source”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF008, pp. 2272-2274.
- L. Zeng et al., “The Beam-Based Alignment Simulation and Preliminary Experiment at SXFEL”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1804-1807.
- I. Miura et al., “A High Energy Version of the RCNP Ring Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper N04, pp. 579-582.
- X. Wu et al., “The Design of the Isochronous and Achromatic Charge-Stripping Sections for the Rare Isotope Accelerator (RIA)”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE093, pp. 1211-1213.
- Q. Zhao, V. Andreev, F. Marti, S. O. Schriber, X. Wu, and R. C. York, “Design Studies of the Reaccelerator RFQ at NSCL”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS054, pp. 1772-1774.
- S. Kwiatkowski et al., “HOM Dampers for ALS Storage Ring RF Cavities”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB023, pp. 1240-1242.
- J. E. Spencer, “Some Uses of REPMM's in Storage Rings and Colliders”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3666-3669.
- D. E. Johnson and M. Xiao, “The Concept Design of a New Transfer Line from Booster to Recycler for the Fermilab Proton Plan Phase 2 Campaign”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS038, pp. 1727-1729.
- W. Booth, E. B. Blanco Vinuela, B. Bradu, L. Gomez Palacin, M. Quilichini, and D. Willeman, “Re-Engineering Control Systems using Automatic Generation Tools and Process Simulation: the LHC Water Cooling Case”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC076, pp. 1242-1245.
- A. Jansson, P. Lebrun, and J. T. Volk, “Beta Function Measurement in the Tevatron Using Quadrupole Gradient Modulation”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT033, pp. 2272-2274.
- J. Corbett, R. Hettel, D. Keeley, I. Linscott, and J. Sebek, “Algorithms for Orbit Control on SPEAR”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1583-1586.
- A. S. Raja Rao, “Status of SRS INDUS-2”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6A003, pp. 641-644.
- M. Therasse et al., “First HIE-ISOLDE Cryo-module Assembly at CERN”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB106, pp. 874-878.
- S. D. Holmes, “Project X: A Multi-MW Proton Source at Fermilab”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUYRA01, pp. 1299-1303.
- S. C. Mun et al., “Study of Geant4 Simulation for Cyclotron Radioisotope Production in Various Target Size”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 105-107.
- J. Hu, C.-K. Min, H. Heo, and Y. J. Park, “Extension of reference tracking method to reduce RF amplitude drift in particle accelerators”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 736-738.
Back to search