Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. A. Pande, C. Christou, P. Gu, and G. Burt, “Modifications to the Pump Out Box to Lower the Qext of Diamond SCRF Cavities”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2251-2253. doi:10.18429/JACoW-IPAC2016-WEPMB060
[n] J. L. Tom, “Modular Accelerator Design”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 872-876.
[n] J. D. Fuerst, M. Kedzie, K. W. Shepard, Z. A. Conway, and M. Kelly, “Superconducting beta=0.15 Quarter-Wave Cavity for RIA”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP05, pp. 605-607.
[n] A. D. Cahill, A. Fukasawa, J. B. Rosenzweig, L. Faillace, B. Spataro, and A. Valloni, “Simulations for the High Gradient, Low Emittance Supergun RF Photoinjector”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP140, pp. 391-393.
[n] M. Acar, J. Boerez, A. Herty, H. Mainaud Durand, A. Marin, and J.-P. Quesnel, “Remote Alignment of Low Beta Quadrupoles with Micrometric Resolution”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD020, pp. 1470-1472.
[n] T. Y. T. Kuo, J. Conti, J. S. Laughlin, R. Lee, and M. Shufer, “The Use of Digital Techniques for Automatic RF Control of the CS-15 Compact Clyclotron”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1076-1079.
[n] R. Merl and T. Spickermann, “Use of a Reconfigurable VME Module To Measure Beam Energy at the Los Alamos Proton Storage Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT019, pp. 1658-1660.
[n] T. F. Günzel, “Transverse Instability Studies at the ALBA Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS065, pp. 751-753.
[n] T. Petersen et al., “Niobium-tin as a transformative technology for low-beta linacs”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2709-2712. doi:10.18429/JACoW-IPAC2024-WEPS09
[n] Y. B. Yan, G. H. Chen, L. W. Lai, Y. B. Leng, L. Y. Yu, and W. M. Zhou, “Application of Embedded Linux Boards in SSRF and SXFEL Control System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4098-4100. doi:10.18429/JACoW-IPAC2016-THPOY007
[n] P. Gu, C. Christou, P. J. Marten, S. A. Pande, A. F. Rankin, and D. Spink, “Operation of Diamond Superconducting RF Cavities”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 87-89. doi:10.18429/JACoW-SRF2017-MOPB016
[n] P. F. Tavares, T. F. Günzel, and R. Nagaoka, “Collective Effects in the MAX IV 3 GeV Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS066, pp. 754-756.
[n] P. Gu et al., “Reliability Improvements of the Diamond Superconducting Cavities”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO068, pp. 267-270.
[n] M. Petrarca et al., “Status of the Sparc Photoinjector”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP038, pp. 333-335.
[n] J. Steinmann et al., “Ultralow-Alpha Operation with three Families of Sextupoles at the KARA Ring”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP5018, unpublished.
[n] T. Y. T. Kuo and J. S. Laughlin, “Initial Experience in Ion Production Using an Ultra-high Power Density Method”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper E-12, pp. 381-385.
[n] M. T. Heron, Y. S. Chernousko, P. Hamadyk, S. C. Lay, and N. Rotolo, “The Diamond Machine Protection System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU003, pp. 1051-1054.
[n] T. F. G??nzel, “Evaluation of the Vertical Transverse Impedance of the ESRF-machine by Element-wise Wakefield Calculation”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI010, pp. 1499-1501.
[n] M. Prieto, J. J. Casas, C. Colldelram, and Y. Nikitin, “ALBA Synchrotron Light Source Liquefaction Helium Plant”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 102-104. doi:10.18429/JACoW-MEDSI2018-TUPH30
[n] G. O. Hendry, A. A. Fleischer, C. G. Smith, J. L. Tom, and D. K. Wells, “Design and Performance of a Compact Multi-particle Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69F05, pp. XX-XX.
[n] A. Fukasawa et al., “SW/TW Hybrid Photoinjector and its Application to the Coherent THz Radiation”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC021, pp. 1758-1760.
[n] M. Jensen et al., “First 18 Months Operation of the Diamond Storage Ring RF System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC025, pp. 2037-2039.
[n] J. Etter, K. Jenkins, and D. Nelson, “Computer Control for the Maryland Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 873-875.
[n] R. K. Mastyna, E. Blanco Vinuela, J. Casas, N. Trikoupis, and M. Felser, “PROFINET Communication Card for the CERN Cryogenics Crate Electronics Instrumentation”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 59-63. doi:10.18429/JACoW-ICALEPCS2017-MOCPL03
[n] J. Calvey et al., “Electron Cloud Mitigation Investigations at CesrTA”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper MIT01, pp. 41-45.
[n] C. Christou et al., “Progress With the Diamond Light Source RF Upgrade”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4358-4361. doi:10.18429/JACoW-IPAC2017-THPIK112
[n] C. Christou et al., “A Hybrid Superconducting/Normal Conducting RF System for the Diamond Light Source Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2950-2952. doi:10.18429/JACoW-IPAC2016-WEPOW047
[n] J. D. Fuerst, M. Kedzie, K. W. Shepard, and M. Kelly, “Cold Tests of a Superconducting Co-Axial Half-Wave Cavity for RIA”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP06, pp. 608-610.
[n] C. Christou et al., “Commissioning of the Hybrid Superconducting/Normal Conducting RF System in the Diamond Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4042-4045. doi:10.18429/JACoW-IPAC2018-THPMF007
[n] A. A. Fleischer, N. E. Jorgensen, R. F. Nissen, D. K. Wells, and F. C. Younger, “A 14 MeV Neutron Source Capable of Delivering a 1000 Rad Dose Uniformly Over a 6x6 - Foot Area”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 262-266.
[n] A. C. Araujo Martinez et al., “Fabrication of 1.3 GHz Nb cavities at RadiaBeam”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPR88, unpublished.
[n] A. Herty et al., “HL-LHC Full Remote Alignment Study”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3716-3719. doi:10.18429/JACoW-IPAC2019-THPGW057
[n] M. Jensen et al., “Operational Experience of Diamond`s Superconducting Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO019, pp. 228-230.
[n] A. Mostacci, D. Alesini, R. Da Re, L. Ficcadenti, L. Palumbo, and B. Spataro, “About Non Resonant Perturbation Field Measurement in Standing Wave Cavities”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP086, pp. 3407-3409.
[n] R. Kersevan and M. Ady, “Recent Developments of Monte-Carlo Codes Molflow+ and Synrad+”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1327-1330. doi:10.18429/JACoW-IPAC2019-TUPMP037
[n] G. Niehues et al., “Measurements of CSR radiation at KARA using novel thin-film lithium niobate electro-optical sensors”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6050, unpublished.
[n] T. F. Günzel, “Longitudinal Beam Stability and Related Effects at the ALBA Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS064, pp. 748-750.
[n] M. Kelly, “Status of superconducting spoke cavity development”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WE302, pp. XX-XX.
[n] M. Zampetakis, R. Calaga, B. E. Karlsen-Bæck, I. Karpov, and H. Timko, “Benchmarking the LHC impedance model through loss of Landau damping measurements and simulations”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 552-555. doi:10.18429/JACoW-IPAC2025-MOPM100
[n] M. Quispe, J. Casas, C. Colldelram, G. Peña Calurano, M. Sanchez Hidalgo, and B. de Abreu Francisco, “Improving helium sustainability: current performance and upgrade of the ALBA helium liquefaction facility”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7086, unpublished.
[n] G. O. Hendry and J. L. Tom, “A Magnetic Extraction Channel for a 30 - Inch AVF Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 500-504.
[n] J. P. Edelen, R. D. Berry, A. Diego, D. I. Gavryushkin, J. Krasna, and A. Yu. Smirnov, “C-Band Low Level RF System Using COTS Components”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 789-791. doi:10.18429/JACoW-LINAC2022-THPOPA22
[n] Y. S. Chernousko, P. Hamadyk, and M. T. Heron, “Review of the Diamond Light Source Timing System”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WECHB02, pp. 144-146.
[n] T. Y. T. Kuo and J. A. Nolen, “Deflector Development for the K1200 Cyclotron”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XC-08, pp. 596-601.
[n] F. Bosco et al., “Advanced studies for the dynamics of high brightness electron beams with the code MILES”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3574-3577. doi:10.18429/JACoW-IPAC2023-WEPL190
[n] G. Cojocaru et al., “Electron Beam Applications in Chemical Processing”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P101, pp. 3854-3856.
[n] F. Donoso et al., “Inovesalib: A Modular Vlasov-Fokker-Planck Solver Framework”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6163, unpublished.
[n] A. Borglund, F. Dos Santos Pedrosa, J.-P. Tock, and M. Bernardini, “PLAN analytics for enhanced understanding of RUN3 and LS3 activities at CERN”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3857-3860. doi:10.18429/JACoW-IPAC2024-THPS52
[n] P. Gu et al., “Management for the Long-Term Reliability of the Diamond Superconducting RF Cavities”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP059, pp. 255-258.
[n] F. Z. Chen et al., “SXFEL Linac BPM System Development and Performance Evaluation”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4794-4796. doi:10.18429/JACoW-IPAC2018-THPML067
[n] F. Zimmermann et al., “FCC-ee Overview”, in Proc. HF'14, Beijing, China, Oct. 2014, paper THP3H1, pp. 6-15.
[n] D. K. Wells, “A Small Cold-Cathode" High- Intensity Cyclotron Ion Source"”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 70-72.
[n] M. Kelly et al., “Installation and commissioning of the APS-U bunch lengthening system”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2713-2716. doi:10.18429/JACoW-IPAC2024-WEPS10
[n] R. Boni et al., “Status of the C-Band RF System for the SPARC-LAB High Brightness Photoinjector”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB080, pp. 360-362.
[n] F. Donoso et al., “Providing reproducibility and accessibility of research software development for accelerator physics at KARA”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6164, unpublished.
[n] F. P?®rez, T. F. G??nzel, and A. Olmos, “BPM Design for the ALBA Synchrotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH078, pp. 1190-1192.
[n] C. Christou et al., “Implications of Increased Beam Current for the Diamond Storage Ring RF System”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP003, pp. 73-76.
[n] J. Kemppinen, H. M. Durand, and A. Herty, “Improving High Precision Cam MoverÔÇÖs Stiffness”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3713-3715. doi:10.18429/JACoW-IPAC2019-THPGW055
[n] M. T. Heron et al., “Progress on the Implementation of the Diamond Control System”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_018.
[n] R. Boni et al., “Status of the C-Band RF System for the SPARC-LAB High Brightness Photoinjector”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPLB09, pp. 162-164.
[n] A. Fukasawa et al., “Beam Dynamics and RF Cavity Design of a Standing/Traveling-Wave Hybrid Photoinjector for High Brightness Beam Generation”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP056, pp. 4434-4436.
[n] I. Podadera et al., “Construction status of the IFMIF-DONES 5 MW linac”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper MOPB022, unpublished.
[n] D. Martin et al., “Status on Linacs Developed at Institute of Atomic Physics - Bucharest, Romania”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W006, pp. 1123-1125.
[n] K. Villafania, M. Kelly, P. Piot, S.-H. Kim, T. Xu, and T. Petersen, “X-ray measurements in a prototype superconducting radiofrequency electron gun for LCLS-II-HE project”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2717-2719. doi:10.18429/JACoW-IPAC2024-WEPS11
[n] S. R. Strangis, G. J. Maslat, and T. Y. T. Kuo, “The Cyclotron Radioisotopes Production Facility of the Argentinean Atomic Energy Commission (CNEA)”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P2-13, pp. XX-XX.
[n] A. Saw et al., “Laser-plasma electron injector for the cSTART storage ring”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP3046, unpublished.
[n] N. Burger, Y.-C. Chen, C. Hall, T. Hodgetts, and J. Xu, “Force-neutral adjustable phase undulators”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS096, unpublished.
[n] S. Coleman et al., “Longitudinal bunch shaping and optimization of the FAST injector”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1393-1395. doi:10.18429/JACoW-IPAC2023-TUPA023
[n] G. O. Hendry, A. A. Fleischer, and D. K. Wells, “Design and Performance of an H- Injector Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69G08, pp. XX-XX.
[n] R. Boni et al., “The RF System of the Sparc Photo-Injector @ LNF”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP043, pp. 676-678.
[n] J. L. Tom, “The Use of Compact Cyclotrons for Producing Fast Neutrons for Therapy in a Rotatable Isocentric Gantry”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper E-19, pp. 2294-2298.
[n] G. Wolber, W. Konowalczyk, W. Weber, F. Helus, and F. Oberdorfer, “The DKFZ Cyclotron - Status Report”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper A-16, pp. 74-75.
[n] M. Kravchenko, L. Amoudry, N. Burger, S. Kutsaev, A. Murokh, and A. Pronikov, “Hybrid RF photoinjector beam characterization with FET detectors”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPG71, unpublished.
[n] M. Mu??oz, D. Einfeld, and T. F. G??nzel, “Closed Orbit Correction and Beam Dynamics Issues at ALBA”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS054, pp. 3404-3406.
[n] M. Reissig et al., “Simulations of an electro-optical in-vacuum bunch profile monitor and measurements at KARA for use in the FCC-ee”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2354-2357. doi:10.18429/JACoW-IPAC2024-WEPG56
[n] N. Burger et al., “Experimental Characterization of Gas Sheet Transverse Profile Diagnostic”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 907-909. doi:10.18429/JACoW-NAPAC2022-THZE4
[n] T. F. G??nzel and F. P?®rez, “Impedance and Instabilities for the ALBA Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP037, pp. 1622-1624.
[n] J. Kallestrup, M. Aiba, N. Carmignani, and T. P. Perron, “A Dispersive Quadrupole Scan Technique for Transverse Beam Characterization”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 107-110. doi:10.18429/JACoW-IPAC2021-MOPAB021
[n] G. Andonian et al., “Gas sheet ionization based monitor for electron beams”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPG93, unpublished.
[n] T. F. Günzel, “Coherent and Incoherent Tune Shifts Deduced from Impedance Modelling in the ESRF-Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT083, pp. 2047-2049.
[n] M. Rabasa et al., “CFD studies and experimental validation of the convective heat transfer coefficient in non-fully developed flows applied to conventional geometries used in particle accelerators”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4912-4915. doi:10.18429/JACoW-IPAC2023-THPM010
[n] F. Dos Santos Pedrosa, A. Uluwita, C. Bernard, G. Georgiev, and N. Mornand, “Injectors de-cabling project”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPS51, unpublished.
[n] Y.-C. Chen et al., “Fast-ramping alpha magnet for interleaved operation at ANL APS”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 856-859. doi:10.18429/JACoW-IPAC2024-MOPS59
[n] M. Loffredo et al., “Challenges of the Long Shutdown 3 for the LHC: from preparation to execution”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP1091, unpublished.
[n] B. Haerer et al., “Constraints on the FCC-ee Lattice from the Compatibility with the FCC Hadron Collider”, in Proc. HF'14, Beijing, China, Oct. 2014, paper FRT2A1, pp. 87-90.
[n] E. Blomley et al., “Resonant spin depolarization at the test facility KARA: overview of recent efforts”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2335-2338. doi:10.18429/JACoW-IPAC2024-WEPG51
[n] R. Alemany-Fernandez et al., “Oxygen and Neon Ion Beam Performance in the CERN Ion Injector Complex”, presented at the IPAC'26, Deauville, France, May 2026, paper THP4085, unpublished.
[n] R. Galan Muñoz, J. Casas, C. Colldelram, and M. Quispe, “CFD thermal studies of the air inside the storage ring tunnel of the ALBA synchrotron light source for the 3rd and 4th generation designs”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2576-2579. doi:10.18429/JACoW-IPAC2025-THPB030
[n] T. Schmelzer, M. Brosi, E. Bruendermann, and A.-S. Mueller, “Modification of the transverse electron bunch profile with spatial light modulator at FLUTE”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6144, unpublished.
[n] O. Manzhura et al., “Terahertz Sampling Rates with Photonic Time-Stretch for Electron Beam Diagnostics”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 263-266. doi:10.18429/JACoW-IPAC2022-MOPOPT017
[n] Y.-C. Chen et al., “Design, manufacturing and validation of fast-ramping alpha magnet for interleaving operation at ANL APS”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2298-2301. doi:10.18429/JACoW-IPAC2025-WEPS025
For LaTeX
Use Complete Form
For BibTeX
References
- S. A. Pande, C. Christou, P. Gu, and G. Burt, “Modifications to the Pump Out Box to Lower the Qext of Diamond SCRF Cavities”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2251-2253.
- J. L. Tom, “Modular Accelerator Design”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 872-876.
- J. D. Fuerst, M. Kedzie, K. W. Shepard, Z. A. Conway, and M. Kelly, “Superconducting beta=0.15 Quarter-Wave Cavity for RIA”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP05, pp. 605-607.
- A. D. Cahill, A. Fukasawa, J. B. Rosenzweig, L. Faillace, B. Spataro, and A. Valloni, “Simulations for the High Gradient, Low Emittance Supergun RF Photoinjector”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP140, pp. 391-393.
- M. Acar, J. Boerez, A. Herty, H. Mainaud Durand, A. Marin, and J.-P. Quesnel, “Remote Alignment of Low Beta Quadrupoles with Micrometric Resolution”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPD020, pp. 1470-1472.
- T. Y. T. Kuo, J. Conti, J. S. Laughlin, R. Lee, and M. Shufer, “The Use of Digital Techniques for Automatic RF Control of the CS-15 Compact Clyclotron”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1076-1079.
- R. Merl and T. Spickermann, “Use of a Reconfigurable VME Module To Measure Beam Energy at the Los Alamos Proton Storage Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT019, pp. 1658-1660.
- T. F. Günzel, “Transverse Instability Studies at the ALBA Storage Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS065, pp. 751-753.
- T. Petersen et al., “Niobium-tin as a transformative technology for low-beta linacs”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS09, pp. 2709-2712.
- Y. B. Yan, G. H. Chen, L. W. Lai, Y. B. Leng, L. Y. Yu, and W. M. Zhou, “Application of Embedded Linux Boards in SSRF and SXFEL Control System”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4098-4100.
- P. Gu, C. Christou, P. J. Marten, S. A. Pande, A. F. Rankin, and D. Spink, “Operation of Diamond Superconducting RF Cavities”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 87-89.
- P. F. Tavares, T. F. Günzel, and R. Nagaoka, “Collective Effects in the MAX IV 3 GeV Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS066, pp. 754-756.
- P. Gu et al., “Reliability Improvements of the Diamond Superconducting Cavities”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO068, pp. 267-270.
- M. Petrarca et al., “Status of the Sparc Photoinjector”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TUP038, pp. 333-335.
- J. Steinmann et al., “Ultralow-Alpha Operation with three Families of Sextupoles at the KARA Ring”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP5018, this conference.
- T. Y. T. Kuo and J. S. Laughlin, “Initial Experience in Ion Production Using an Ultra-high Power Density Method”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper E-12, pp. 381-385.
- M. T. Heron, Y. S. Chernousko, P. Hamadyk, S. C. Lay, and N. Rotolo, “The Diamond Machine Protection System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU003, pp. 1051-1054.
- T. F. G??nzel, “Evaluation of the Vertical Transverse Impedance of the ESRF-machine by Element-wise Wakefield Calculation”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI010, pp. 1499-1501.
- M. Prieto, J. J. Casas, C. Colldelram, and Y. Nikitin, “ALBA Synchrotron Light Source Liquefaction Helium Plant”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 102-104.
- G. O. Hendry, A. A. Fleischer, C. G. Smith, J. L. Tom, and D. K. Wells, “Design and Performance of a Compact Multi-particle Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69F05, pp. XX-XX.
- A. Fukasawa et al., “SW/TW Hybrid Photoinjector and its Application to the Coherent THz Radiation”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC021, pp. 1758-1760.
- M. Jensen et al., “First 18 Months Operation of the Diamond Storage Ring RF System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC025, pp. 2037-2039.
- J. Etter, K. Jenkins, and D. Nelson, “Computer Control for the Maryland Cyclotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 873-875.
- R. K. Mastyna, E. Blanco Vinuela, J. Casas, N. Trikoupis, and M. Felser, “PROFINET Communication Card for the CERN Cryogenics Crate Electronics Instrumentation”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 59-63.
- J. Calvey et al., “Electron Cloud Mitigation Investigations at CesrTA”, in Proc. 49th ICFA Advanced Beam Dynamics Workshop on Electron Cloud Physics (ECLOUD'10), Ithaca, NY, USA, Oct. 2010, paper MIT01, pp. 41-45.
- C. Christou et al., “Progress With the Diamond Light Source RF Upgrade”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4358-4361.
- C. Christou et al., “A Hybrid Superconducting/Normal Conducting RF System for the Diamond Light Source Storage Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2950-2952.
- J. D. Fuerst, M. Kedzie, K. W. Shepard, and M. Kelly, “Cold Tests of a Superconducting Co-Axial Half-Wave Cavity for RIA”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP06, pp. 608-610.
- C. Christou et al., “Commissioning of the Hybrid Superconducting/Normal Conducting RF System in the Diamond Storage Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4042-4045.
- A. A. Fleischer, N. E. Jorgensen, R. F. Nissen, D. K. Wells, and F. C. Younger, “A 14 MeV Neutron Source Capable of Delivering a 1000 Rad Dose Uniformly Over a 6x6 - Foot Area”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 262-266.
- A. C. Araujo Martinez et al., “Fabrication of 1.3 GHz Nb cavities at RadiaBeam”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR88, unpublished.
- A. Herty et al., “HL-LHC Full Remote Alignment Study”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3716-3719.
- M. Jensen et al., “Operational Experience of Diamond`s Superconducting Cavities”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO019, pp. 228-230.
- A. Mostacci, D. Alesini, R. Da Re, L. Ficcadenti, L. Palumbo, and B. Spataro, “About Non Resonant Perturbation Field Measurement in Standing Wave Cavities”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP086, pp. 3407-3409.
- R. Kersevan and M. Ady, “Recent Developments of Monte-Carlo Codes Molflow+ and Synrad+”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1327-1330.
- G. Niehues et al., “Measurements of CSR radiation at KARA using novel thin-film lithium niobate electro-optical sensors”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP6050, this conference.
- T. F. Günzel, “Longitudinal Beam Stability and Related Effects at the ALBA Storage Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS064, pp. 748-750.
- M. Kelly, “Status of superconducting spoke cavity development”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WE302, pp. XX-XX.
- M. Zampetakis, R. Calaga, B. E. Karlsen-Bæck, I. Karpov, and H. Timko, “Benchmarking the LHC impedance model through loss of Landau damping measurements and simulations”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPM100, pp. 552-555.
- M. Quispe, J. Casas, C. Colldelram, G. Peña Calurano, M. Sanchez Hidalgo, and B. de Abreu Francisco, “Improving helium sustainability: current performance and upgrade of the ALBA helium liquefaction facility”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP7086, this conference.
- G. O. Hendry and J. L. Tom, “A Magnetic Extraction Channel for a 30 - Inch AVF Cyclotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 500-504.
- J. P. Edelen, R. D. Berry, A. Diego, D. I. Gavryushkin, J. Krasna, and A. Yu. Smirnov, “C-Band Low Level RF System Using COTS Components”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 789-791.
- Y. S. Chernousko, P. Hamadyk, and M. T. Heron, “Review of the Diamond Light Source Timing System”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper WECHB02, pp. 144-146.
- T. Y. T. Kuo and J. A. Nolen, “Deflector Development for the K1200 Cyclotron”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XC-08, pp. 596-601.
- F. Bosco et al., “Advanced studies for the dynamics of high brightness electron beams with the code MILES”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL190, pp. 3574-3577.
- G. Cojocaru et al., “Electron Beam Applications in Chemical Processing”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P101, pp. 3854-3856.
- F. Donoso et al., “Inovesalib: A Modular Vlasov-Fokker-Planck Solver Framework”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP6163, this conference.
- A. Borglund, F. Dos Santos Pedrosa, J.-P. Tock, and M. Bernardini, “PLAN analytics for enhanced understanding of RUN3 and LS3 activities at CERN”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS52, pp. 3857-3860.
- P. Gu et al., “Management for the Long-Term Reliability of the Diamond Superconducting RF Cavities”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP059, pp. 255-258.
- F. Z. Chen et al., “SXFEL Linac BPM System Development and Performance Evaluation”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4794-4796.
- F. Zimmermann et al., “FCC-ee Overview”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper THP3H1, pp. 6-15.
- D. K. Wells, “A Small Cold-Cathode" High- Intensity Cyclotron Ion Source"”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 70-72.
- M. Kelly et al., “Installation and commissioning of the APS-U bunch lengthening system”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS10, pp. 2713-2716.
- R. Boni et al., “Status of the C-Band RF System for the SPARC-LAB High Brightness Photoinjector”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB080, pp. 360-362.
- F. Donoso et al., “Providing reproducibility and accessibility of research software development for accelerator physics at KARA”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP6164, this conference.
- F. P?®rez, T. F. G??nzel, and A. Olmos, “BPM Design for the ALBA Synchrotron”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH078, pp. 1190-1192.
- C. Christou et al., “Implications of Increased Beam Current for the Diamond Storage Ring RF System”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP003, pp. 73-76.
- J. Kemppinen, H. M. Durand, and A. Herty, “Improving High Precision Cam MoverÔÇÖs Stiffness”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3713-3715.
- M. T. Heron et al., “Progress on the Implementation of the Diamond Control System”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_018.
- R. Boni et al., “Status of the C-Band RF System for the SPARC-LAB High Brightness Photoinjector”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPLB09, pp. 162-164.
- A. Fukasawa et al., “Beam Dynamics and RF Cavity Design of a Standing/Traveling-Wave Hybrid Photoinjector for High Brightness Beam Generation”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP056, pp. 4434-4436.
- I. Podadera et al., “Construction status of the IFMIF-DONES 5 MW linac”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper MOPB022, unpublished.
- D. Martin et al., “Status on Linacs Developed at Institute of Atomic Physics - Bucharest, Romania”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5W006, pp. 1123-1125.
- K. Villafania, M. Kelly, P. Piot, S.-H. Kim, T. Xu, and T. Petersen, “X-ray measurements in a prototype superconducting radiofrequency electron gun for LCLS-II-HE project”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS11, pp. 2717-2719.
- S. R. Strangis, G. J. Maslat, and T. Y. T. Kuo, “The Cyclotron Radioisotopes Production Facility of the Argentinean Atomic Energy Commission (CNEA)”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P2-13, pp. XX-XX.
- A. Saw et al., “Laser-plasma electron injector for the cSTART storage ring”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP3046, this conference.
- N. Burger, Y.-C. Chen, C. Hall, T. Hodgetts, and J. Xu, “Force-neutral adjustable phase undulators”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS096, unpublished.
- S. Coleman et al., “Longitudinal bunch shaping and optimization of the FAST injector”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA023, pp. 1393-1395.
- G. O. Hendry, A. A. Fleischer, and D. K. Wells, “Design and Performance of an H- Injector Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69G08, pp. XX-XX.
- R. Boni et al., “The RF System of the Sparc Photo-Injector @ LNF”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper THP043, pp. 676-678.
- J. L. Tom, “The Use of Compact Cyclotrons for Producing Fast Neutrons for Therapy in a Rotatable Isocentric Gantry”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper E-19, pp. 2294-2298.
- G. Wolber, W. Konowalczyk, W. Weber, F. Helus, and F. Oberdorfer, “The DKFZ Cyclotron - Status Report”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper A-16, pp. 74-75.
- M. Kravchenko, L. Amoudry, N. Burger, S. Kutsaev, A. Murokh, and A. Pronikov, “Hybrid RF photoinjector beam characterization with FET detectors”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG71, unpublished.
- M. Mu??oz, D. Einfeld, and T. F. G??nzel, “Closed Orbit Correction and Beam Dynamics Issues at ALBA”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS054, pp. 3404-3406.
- M. Reissig et al., “Simulations of an electro-optical in-vacuum bunch profile monitor and measurements at KARA for use in the FCC-ee”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG56, pp. 2354-2357.
- N. Burger et al., “Experimental Characterization of Gas Sheet Transverse Profile Diagnostic”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 907-909.
- T. F. G??nzel and F. P?®rez, “Impedance and Instabilities for the ALBA Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP037, pp. 1622-1624.
- J. Kallestrup, M. Aiba, N. Carmignani, and T. P. Perron, “A Dispersive Quadrupole Scan Technique for Transverse Beam Characterization”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 107-110.
- G. Andonian et al., “Gas sheet ionization based monitor for electron beams”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG93, unpublished.
- T. F. Günzel, “Coherent and Incoherent Tune Shifts Deduced from Impedance Modelling in the ESRF-Ring”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT083, pp. 2047-2049.
- M. Rabasa et al., “CFD studies and experimental validation of the convective heat transfer coefficient in non-fully developed flows applied to conventional geometries used in particle accelerators”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM010, pp. 4912-4915.
- F. Dos Santos Pedrosa, A. Uluwita, C. Bernard, G. Georgiev, and N. Mornand, “Injectors de-cabling project”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS51, unpublished.
- Y.-C. Chen et al., “Fast-ramping alpha magnet for interleaved operation at ANL APS”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS59, pp. 856-859.
- M. Loffredo et al., “Challenges of the Long Shutdown 3 for the LHC: from preparation to execution”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP1091, this conference.
- B. Haerer et al., “Constraints on the FCC-ee Lattice from the Compatibility with the FCC Hadron Collider”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper FRT2A1, pp. 87-90.
- E. Blomley et al., “Resonant spin depolarization at the test facility KARA: overview of recent efforts”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG51, pp. 2335-2338.
- R. Alemany-Fernandez et al., “Oxygen and Neon Ion Beam Performance in the CERN Ion Injector Complex”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP4085, this conference.
- R. Galan Muñoz, J. Casas, C. Colldelram, and M. Quispe, “CFD thermal studies of the air inside the storage ring tunnel of the ALBA synchrotron light source for the 3rd and 4th generation designs”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB030, pp. 2576-2579.
- T. Schmelzer, M. Brosi, E. Bruendermann, and A.-S. Mueller, “Modification of the transverse electron bunch profile with spatial light modulator at FLUTE”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP6144, this conference.
- O. Manzhura et al., “Terahertz Sampling Rates with Photonic Time-Stretch for Electron Beam Diagnostics”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 263-266.
- Y.-C. Chen et al., “Design, manufacturing and validation of fast-ramping alpha magnet for interleaving operation at ANL APS”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS025, pp. 2298-2301.
Back to search