Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K. V. Fedorov et al., “Application of Thermoelectric Oscillations in a Lithium Niobate Single Crystal for Particle Generation”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 620-623. doi:10.18429/JACoW-IBIC2019-WEPP036
[n] L. Giuliano et al., “Design and test of C-band linac prototypes for electron flash radiotherapy”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5056-5058. doi:10.18429/JACoW-IPAC2023-THPM070
[n] J. Fernandez Cortes, A. Antoine, B. Schofield, E. Blanco Vinuela, I. Romera, and M. Kalinowski, “Ensuring the fast response in the powering interlock controller (PIC) upgrade: a UNICOS-based approach”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1590-1595. doi:10.18429/JACoW-ICALEPCS2025-THPD013
[n] M. Eberhardt, F. Frommberger, W. Hillert, and A. Roth, “Measurement and Correction of the Longitudinal and Transversal Tunes during the Fast Energy Ramp at ELSA”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD085, pp. 897-899.
[n] J. Wieland and A. Romanov, “Injection simulations of space charge dominated proton beams in IOTA”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 995-998. doi:10.18429/JACoW-IPAC2025-TUPB020
[n] E. M. Donegani, “Proton-Induced SEY From Beam Interceptive Devices in the ESS Linac”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 117-119. doi:10.18429/JACoW-IBIC2020-WEPP10
[n] C. Richard et al., “Slice energy spread measurements of a 20 MeV electron beam at PITZ”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2240-2243. doi:10.18429/JACoW-IPAC2024-WEPG22
[n] K. Blasche, G. Moritz, B. Franczak, C. Riedel, and G. Langenbeck, “The Heavy Ion Synchrotron SIS - A Progress Report”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3736-3739.
[n] M. Mapes et al., “A Summary and Status of the SNS Ring Vacuum Systems”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE046, pp. 2929-2931.
[n] N. Cook et al., “Integrating community codes for accelerator design and optimization”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 3083-3085. doi:10.18429/JACoW-IPAC2025-THPS053
[n] D. Reitmann, “A Brief History of South Africa's Cyclotrons”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper BNQT-01, pp. 3-5.
[n] R. J. Macek, D. H. Fitzgerald, R. York, M. Hoehn, and R. Ryder, “Status of the PSR Improvement Program”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3739-3742.
[n] S. Schneider, A. H. Botha, J. C. Cornell, and P. G. Molteno, “The Beam Diagnostic System for the Transfer Beamline at the NAC”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J20, pp. 407-410.
[n] P. M. Cronje, “Orbit Studies for the NAC Separated-Sector Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper G-07, pp. 244-247.
[n] P. Kruyt, D. Gamba, and G. Franchetti, “Measurements and simulations of the e-cooling performance in ELENA”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 836-839. doi:10.18429/JACoW-IPAC2024-MOPS51
[n] L. R. Dalesio, A. J. Kozubal, and M. R. Kraimer, “EPICS Architecture”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 278-282. doi:10.18429/JACoW-ICALEPCS1991-S07IC03
[n] H. N. Jungwirth, L. D. Bruins, A. H. Botha, and J. L. Pabot, “Design of Magnets for an Open-Sector Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper C-14, pp. 193-196.
[n] J. Haimson and B. Mecklenburg, “Microwave and Beam Optics Design Features of a Preinjector Linac for a Synchrotron Radiation Source”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3183-3186.
[n] S. J. Burger et al., “The Electrolytic Tank Facility at the NAC”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B12, pp. 63-66.
[n] M. A. Jaworski, D. C. Moir, and S. Szustkowski, “Uncertainty Quantification of Beam Parameters in a Linear Induction Accelerator Inferred from Bayesian Analysis of Solenoid Scans”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 34-36. doi:10.18429/JACoW-NAPAC2022-MOZD4
[n] J. R. Harper, D. T. Akello-Egwel, D. E. Oram, T. S. Richter, and M. D. Jones, “Defining, Storing, and Visualising Instrument Geometry”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper WEPHA062, pp. XX-XX.
[n] M. Boutheon, F. Di Maio, and A. Pace, “General Man-Machine Interface Used in Accelerators Controls: Some Applications in CERN-PS Control Systems Rejuvenation”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 452-455. doi:10.18429/JACoW-ICALEPCS1991-S13MMI02
[n] X.-Y. Zhang, R. Li, P.-W. Huang, Y. Du, and C. Tang, “Simulations of simultaneous measurement of GHz bunches using a fast kicker”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2430-2433. doi:10.18429/JACoW-IPAC2024-WEPG89
[n] J.-G. Wang, D. LeBon, R. McBrien, and T. Hunter, “Characterization of a SNS Transfer Line Dipole”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO038, pp. 2388-2390.
[n] N. Kuklev, A. Romanov, A. Valishev, and J. Wieland, “New results of nonlinear quasi-integrable lattice studies”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPM115, unpublished.
[n] P. H?ñffner et al., “A Novel Automatic Focusing System for the Production of Radioisotopes for Theranostics”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2480-2482. doi:10.18429/JACoW-IPAC2021-TUPAB408
[n] M. Arnold et al., “Construction and Status of the Thrice Recirculating S-DALINAC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1384-1387. doi:10.18429/JACoW-IPAC2017-TUPAB030
[n] S. Braccini, P. Casolaro, G. Dellepiane, A. Gottstein, I. Mateu, and P. Scampoli, “Accelerator and Detector Developments for the Production of Theranostic Radioisotopes with Solid Targets at the Bern Medical Cyclotron”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper WEBO06, pp. 196-199. doi:10.18429/JACoW-CYCLOTRONS2022-WEBO06
[n] A. S. Plastun, P. N. Ostroumov, A. C. C. Villari, and Q. Zhao, “Redesign of ReA3 4-Rod RFQ”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 807-809. doi:10.18429/JACoW-NAPAC2019-WEPLH03
For LaTeX
Use Complete Form
For BibTeX
References
- K. V. Fedorov et al., “Application of Thermoelectric Oscillations in a Lithium Niobate Single Crystal for Particle Generation”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 620-623.
- L. Giuliano et al., “Design and test of C-band linac prototypes for electron flash radiotherapy”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM070, pp. 5056-5058.
- J. Fernandez Cortes, A. Antoine, B. Schofield, E. Blanco Vinuela, I. Romera, and M. Kalinowski, “Ensuring the fast response in the powering interlock controller (PIC) upgrade: a UNICOS-based approach”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1590-1595.
- M. Eberhardt, F. Frommberger, W. Hillert, and A. Roth, “Measurement and Correction of the Longitudinal and Transversal Tunes during the Fast Energy Ramp at ELSA”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD085, pp. 897-899.
- J. Wieland and A. Romanov, “Injection simulations of space charge dominated proton beams in IOTA”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB020, pp. 995-998.
- E. M. Donegani, “Proton-Induced SEY From Beam Interceptive Devices in the ESS Linac”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 117-119.
- C. Richard et al., “Slice energy spread measurements of a 20 MeV electron beam at PITZ”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG22, pp. 2240-2243.
- K. Blasche, G. Moritz, B. Franczak, C. Riedel, and G. Langenbeck, “The Heavy Ion Synchrotron SIS - A Progress Report”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3736-3739.
- M. Mapes et al., “A Summary and Status of the SNS Ring Vacuum Systems”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPE046, pp. 2929-2931.
- N. Cook et al., “Integrating community codes for accelerator design and optimization”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS053, pp. 3083-3085.
- D. Reitmann, “A Brief History of South Africa's Cyclotrons”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper BNQT-01, pp. 3-5.
- R. J. Macek, D. H. Fitzgerald, R. York, M. Hoehn, and R. Ryder, “Status of the PSR Improvement Program”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3739-3742.
- S. Schneider, A. H. Botha, J. C. Cornell, and P. G. Molteno, “The Beam Diagnostic System for the Transfer Beamline at the NAC”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J20, pp. 407-410.
- P. M. Cronje, “Orbit Studies for the NAC Separated-Sector Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper G-07, pp. 244-247.
- P. Kruyt, D. Gamba, and G. Franchetti, “Measurements and simulations of the e-cooling performance in ELENA”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS51, pp. 836-839.
- L. R. Dalesio, A. J. Kozubal, and M. R. Kraimer, “EPICS Architecture”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S07IC03, pp. 278-282.
- H. N. Jungwirth, L. D. Bruins, A. H. Botha, and J. L. Pabot, “Design of Magnets for an Open-Sector Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper C-14, pp. 193-196.
- J. Haimson and B. Mecklenburg, “Microwave and Beam Optics Design Features of a Preinjector Linac for a Synchrotron Radiation Source”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3183-3186.
- S. J. Burger et al., “The Electrolytic Tank Facility at the NAC”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B12, pp. 63-66.
- M. A. Jaworski, D. C. Moir, and S. Szustkowski, “Uncertainty Quantification of Beam Parameters in a Linear Induction Accelerator Inferred from Bayesian Analysis of Solenoid Scans”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 34-36.
- J. R. Harper, D. T. Akello-Egwel, D. E. Oram, T. S. Richter, and M. D. Jones, “Defining, Storing, and Visualising Instrument Geometry”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper WEPHA062, pp. XX-XX.
- M. Boutheon, F. Di Maio, and A. Pace, “General Man-Machine Interface Used in Accelerators Controls: Some Applications in CERN-PS Control Systems Rejuvenation”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S13MMI02, pp. 452-455.
- X.-Y. Zhang, R. Li, P.-W. Huang, Y. Du, and C. Tang, “Simulations of simultaneous measurement of GHz bunches using a fast kicker”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG89, pp. 2430-2433.
- J.-G. Wang, D. LeBon, R. McBrien, and T. Hunter, “Characterization of a SNS Transfer Line Dipole”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO038, pp. 2388-2390.
- N. Kuklev, A. Romanov, A. Valishev, and J. Wieland, “New results of nonlinear quasi-integrable lattice studies”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPM115, unpublished.
- P. H?ñffner et al., “A Novel Automatic Focusing System for the Production of Radioisotopes for Theranostics”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2480-2482.
- M. Arnold et al., “Construction and Status of the Thrice Recirculating S-DALINAC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1384-1387.
- S. Braccini, P. Casolaro, G. Dellepiane, A. Gottstein, I. Mateu, and P. Scampoli, “Accelerator and Detector Developments for the Production of Theranostic Radioisotopes with Solid Targets at the Bern Medical Cyclotron”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper WEBO06, pp. 196-199.
- A. S. Plastun, P. N. Ostroumov, A. C. C. Villari, and Q. Zhao, “Redesign of ReA3 4-Rod RFQ”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 807-809.
Back to search