Favourites
For Word
[n] Z. Sorrell, P. Cerniglia, R. L. Hulsart, K. Mernick, and R. J. Michnoff, “Beam Position Monitors for LEReC”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 47-50. doi:10.18429/JACoW-IBIC2016-MOPG08
[n] M. J. Barnes et al., “Operational Experience of a Prototype LHC Injection Kicker Magnet with a Low SEY Coating and Redistributed Power Deposition”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3974-3977. doi:10.18429/JACoW-IPAC2019-THPRB072
[n] E. Naselli et al., “Impact of the Two Close Frequency Heating on ECRIS Plasmas Stability”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 214-218. doi:10.18429/JACoW-ECRIS2018-FRB2
[n] Y. H. Wu and J. Ellsworth, “Summary of Beam Operation Capability at FXR LIA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3316-3319. doi:10.18429/JACoW-IPAC2018-THPAK045
[n] Y. L. Zhang and G. Lei, “WPF Based EPICS Server and its Application in CSNS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA011, pp. 3170-3172.
[n] D. Longuevergne et al., “HOM Excitation in Spoke Resonator for SRF Studies”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 435. doi:10.18429/JACoW-SRF2021-TUPCAV002
[n] M. Comunian et al., “The Project SPES at Legnaro National Laboratories”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper TUA2C02, pp. 156-159.
[n] B. Quinn et al., “Design and Testing of a Fast Beam Position Monitor”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB073, pp. 2571-2573.
[n] K. Rathsman et al., “The RF Power Source for the High Beta Elliptical Cavities of the ESS Linac”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC136, pp. 397-399.
[n] A. Calanna et al., “Proposal to Increase the Extracted Beam Power from the LNS-INFN Superconducting Cyclotron”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOA1C03, pp. 23-26.
[n] D. Ilia et al., “Gradient-based laser control for end-to-end photoinjector emittance optimization at EuXFEL”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6006, unpublished.
[n] M. J. Barnes et al., “Reduction of Surface Flashover of the Beam Screen of the LHC Injection Kickers”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA032, pp. 735-737.
[n] Q. Y. Kong, S. LIU, A. Li, H. Liu, and Y. Yang, “Preliminary Design of an RF-focused Interdigital Drift Tube Linac”, presented at the IPAC'26, Deauville, France, May 2026, paper THP3613, unpublished.
[n] S. Y. Zhao, M. Li, P. Li, J. Wang, D. Wu, and X. Yang, “Theoretical Analysis and Experimental Design of Terahertz Single-Pulse Picking based on Plasma Mirror”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2613-2615. doi:10.18429/JACoW-IPAC2019-WEPGW060
[n] L. Celona et al., “Design Issues of the Proton Source for the ESS Facility”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB076, pp. 1008-1010.
For LaTeX
Use Complete Form
For BibTeX
References
- Z. Sorrell, P. Cerniglia, R. L. Hulsart, K. Mernick, and R. J. Michnoff, “Beam Position Monitors for LEReC”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 47-50.
- M. J. Barnes et al., “Operational Experience of a Prototype LHC Injection Kicker Magnet with a Low SEY Coating and Redistributed Power Deposition”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3974-3977.
- E. Naselli et al., “Impact of the Two Close Frequency Heating on ECRIS Plasmas Stability”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 214-218.
- Y. H. Wu and J. Ellsworth, “Summary of Beam Operation Capability at FXR LIA”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3316-3319.
- Y. L. Zhang and G. Lei, “WPF Based EPICS Server and its Application in CSNS”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPEA011, pp. 3170-3172.
- D. Longuevergne et al., “HOM Excitation in Spoke Resonator for SRF Studies”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 435.
- M. Comunian et al., “The Project SPES at Legnaro National Laboratories”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper TUA2C02, pp. 156-159.
- B. Quinn et al., “Design and Testing of a Fast Beam Position Monitor”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB073, pp. 2571-2573.
- K. Rathsman et al., “The RF Power Source for the High Beta Elliptical Cavities of the ESS Linac”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC136, pp. 397-399.
- A. Calanna et al., “Proposal to Increase the Extracted Beam Power from the LNS-INFN Superconducting Cyclotron”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper MOA1C03, pp. 23-26.
- D. Ilia et al., “Gradient-based laser control for end-to-end photoinjector emittance optimization at EuXFEL”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP6006, this conference.
- M. J. Barnes et al., “Reduction of Surface Flashover of the Beam Screen of the LHC Injection Kickers”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA032, pp. 735-737.
- Q. Y. Kong, S. LIU, A. Li, H. Liu, and Y. Yang, “Preliminary Design of an RF-focused Interdigital Drift Tube Linac”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP3613, this conference.
- S. Y. Zhao, M. Li, P. Li, J. Wang, D. Wu, and X. Yang, “Theoretical Analysis and Experimental Design of Terahertz Single-Pulse Picking based on Plasma Mirror”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2613-2615.
- L. Celona et al., “Design Issues of the Proton Source for the ESS Facility”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB076, pp. 1008-1010.
Back to search