Favourites
For Word
[n] T. Plettner and R. L. Byer, “Proposed Tabletop Laser-driven Coherent X-Ray Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS069, pp. 1332-1334.
[n] T. Plettner, R. L. Byer, and P. P. Lu, “Proposed Few-cycle Laser-particle Accelerator Structure”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS081, pp. 3175-3177.
[n] P. A. McIntosh et al., “VELA: A New Accelerator Technology Development Platform for Industry”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2471-2473. doi:10.18429/JACoW-IPAC2014-WEPME083
[n] J. F. Chen, M. Moretti, C. Pagani, and P. Pierini, “Improvements of Buildcavity Code”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB006, pp. 1070-1072.
[n] M. Giovannozzi, R. De Maria, and F. Lang, “Analysis of Possible Functional Forms of the Scaling Law for Dynamic Aperture as a Function of Time”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA050, pp. 2618-2620.
[n] R. Cubizolles et al., “CEA Preliminary Design of the Cryomodules for SARAF Phase II Superconducting Linac”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 951-953. doi:10.18429/JACoW-IPAC2017-MOPVA042
[n] L. Catani et al., “!CHAOS: the Control Server" Framework for Controls"”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC126, pp. 403-406.
[n] P. A. McIntosh et al., “A New Electron Beam Test Facility (EBTF) at Daresbury Laboratory for Industrial Accelerator System Development”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR044, pp. 4074-4076.
[n] B. J. A. Shepherd et al., “Design and Measurement of a Low-energy Tunable Permanent Magnet Quadrupole Prototype”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1316-1318. doi:10.18429/JACoW-IPAC2014-TUPRO113
[n] Y. K. Batygin, “Design Issues of Low Energy Beam Transport”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA065, pp. 1853-1855.
[n] J. D. Gilpatrick et al., “Wire Scanner Beam Profile Measurements: LANSCE Facility Beam Development”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR080, pp. 975-977.
[n] V. H. Hardion et al., “MAX IV Laboratory, Milestones and Lessons Learned”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 9-13. doi:10.18429/JACoW-ICALEPCS2015-MOB3O03
[n] S. Seletskiy et al., “Analysis of Possible Beam Losses in the NSLS II Storage Ring”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1956-1958. doi:10.18429/JACoW-IPAC2015-TUPMA055
[n] S. Wang, J. Guo, R. A. Rimmer, and H. Wang, “JLEIC SRF Cavity RF Design”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2522-2524. doi:10.18429/JACoW-IPAC2016-WEPMW039
[n] T. Shintake et al., “Results from Hardware R&D on C-Band RF-System for $eE-$ Linear Collider”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4020, pp. 94-96.
[n] A. Bartalesi and M. Modena, “3D FEA Computation of the CLIC Machine Detector Interface Magnets”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR052, pp. 1936-1938.
[n] E. Wooldridge, C. D. Beard, P. A. McIntosh, B. D. Muratori, and S. L. Smith, “BBU Limitations for ERLs”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC059, pp. 199-201.
[n] S. Fukuda et al., “Compensation of Initial Beam Loading for Electron Linacs”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP5A07, pp. 2462-2464.
[n] M. Kastriotou et al., “A Versatile Beam Loss Monitoring System for CLIC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 286-289. doi:10.18429/JACoW-IPAC2016-MOPMR024
[n] A. Streun et al., “Proposed Upgrade of the SLS Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2922-2925. doi:10.18429/JACoW-IPAC2016-WEPOW038
[n] C. Bisegni et al., “Development of an Innovative Storage Manager for a Distributed Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC011, pp. 570-573.
[n] Y. M. Saveliev, D. J. Holder, B. D. Muratori, and S. L. Smith, “Results from ALICE (ERLP) DC Photoinjector Gun Commissioning”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC062, pp. 208-210.
[n] C. P. Welsch, M. G. Ibison, Y. Wei, J. D. A. Smith, and G. X. Xia, “Optimization of Dielectric Laser-Driven Accelerators”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4737-4740. doi:10.18429/JACoW-IPAC2018-THPML043
[n] G. V. Stupakov, “Beam Echo Effect For Generation Of Short-Wavelength Radiation”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper MOOB01, pp. 15-22.
[n] T. Schietinger et al., “Progress Report on the SwissFEL Injector Test Facility”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP065, pp. 1747-1749.
[n] K. N. Sjobak, R. Bruce, H. Burkhardt, A. Macpherson, A. Santamar?¡a Garc?¡a, and R. Kwee-Hinzmann, “Time Scale of Crab Cavity Failures Relevant for High Luminosity LHC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4196-4199. doi:10.18429/JACoW-IPAC2016-THPOY043
[n] Y. Tsuzuki et al., “Polarimetry of Hard X-Rays from Highly Charged Ions Using a Si/CdTe Compton Camera”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper FR3WH01, unpublished.
[n] E. Meier, S. Biedron, G. LeBlanc, M. J. Morgan, and J. Wu, “Electron Beam Stabilisation Test Results Using a Neural Network Hybrid Controller at the Australian Synchotron and LINAC Coherent Light Source Projects”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper FROA02, pp. 766-771.
[n] O. A. Shevchenko and N. Vinokurov, “Statistical Theory of the SASE FEL Based on the Two-particle Correlation Function Equation”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper MOOA02, pp. 8-14.
[n] R. J. Barlow, T. R. Edgecock, C. Johnstone, H. L. Owen, and S. L. Sheehy, “PIP: A Low Energy Recycling Non-scaling FFAG for Security and Medicine”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWA037, pp. 3711-3713.
[n] L. Ma, P. A. Corlett, and A. J. Moss, “LLRF Characterisation of the Daresbury International Cryomodule”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME052, pp. 3046-3048.
[n] P. A. Corlett, L. Ma, and A. J. Moss, “Digital Low Level RF Development at Daresbury Laboratory”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC165, pp. 469-471.
[n] M. Boscolo et al., “Generation of a Multipulse Comb Beam and a Relative Twin Pulse FEL”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN035, pp. 989-991.
[n] F. Ciocci, G. Dattoli, L. Giannessi, and A. Torre, “Design of Hybrid Magnet Undulators with Non-Constant Parameters for High Gain, High Efficiency Free Electron Laser”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1027-1030.
[n] B. D. Muratori et al., “New Results from the EMMA Experiment”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEOAB01, pp. 2134-2136.
[n] J.-C. Chang, Y.-H. Liu, and Z.-D. Tsai, “Air Temperature Analysis and Control Improvement for the Injection Area at TLS”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA091, pp. 773-775.
[n] K. M. Hock, D. J. Holder, M. G. Ibison, B. D. Muratori, and A. Wolski, “Phase Space Tomography Research at Daresbury”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THOAB103, pp. 3096-3098.
For LaTeX
Use Complete Form
For BibTeX
References
- T. Plettner and R. L. Byer, “Proposed Tabletop Laser-driven Coherent X-Ray Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMS069, pp. 1332-1334.
- T. Plettner, R. L. Byer, and P. P. Lu, “Proposed Few-cycle Laser-particle Accelerator Structure”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS081, pp. 3175-3177.
- P. A. McIntosh et al., “VELA: A New Accelerator Technology Development Platform for Industry”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2471-2473.
- J. F. Chen, M. Moretti, C. Pagani, and P. Pierini, “Improvements of Buildcavity Code”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB006, pp. 1070-1072.
- M. Giovannozzi, R. De Maria, and F. Lang, “Analysis of Possible Functional Forms of the Scaling Law for Dynamic Aperture as a Function of Time”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA050, pp. 2618-2620.
- R. Cubizolles et al., “CEA Preliminary Design of the Cryomodules for SARAF Phase II Superconducting Linac”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 951-953.
- L. Catani et al., “!CHAOS: the Control Server" Framework for Controls"”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC126, pp. 403-406.
- P. A. McIntosh et al., “A New Electron Beam Test Facility (EBTF) at Daresbury Laboratory for Industrial Accelerator System Development”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR044, pp. 4074-4076.
- B. J. A. Shepherd et al., “Design and Measurement of a Low-energy Tunable Permanent Magnet Quadrupole Prototype”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1316-1318.
- Y. K. Batygin, “Design Issues of Low Energy Beam Transport”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWA065, pp. 1853-1855.
- J. D. Gilpatrick et al., “Wire Scanner Beam Profile Measurements: LANSCE Facility Beam Development”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR080, pp. 975-977.
- V. H. Hardion et al., “MAX IV Laboratory, Milestones and Lessons Learned”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 9-13.
- S. Seletskiy et al., “Analysis of Possible Beam Losses in the NSLS II Storage Ring”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1956-1958.
- S. Wang, J. Guo, R. A. Rimmer, and H. Wang, “JLEIC SRF Cavity RF Design”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2522-2524.
- T. Shintake et al., “Results from Hardware R&D on C-Band RF-System for $eE-$ Linear Collider”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4020, pp. 94-96.
- A. Bartalesi and M. Modena, “3D FEA Computation of the CLIC Machine Detector Interface Magnets”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR052, pp. 1936-1938.
- E. Wooldridge, C. D. Beard, P. A. McIntosh, B. D. Muratori, and S. L. Smith, “BBU Limitations for ERLs”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC059, pp. 199-201.
- S. Fukuda et al., “Compensation of Initial Beam Loading for Electron Linacs”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP5A07, pp. 2462-2464.
- M. Kastriotou et al., “A Versatile Beam Loss Monitoring System for CLIC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 286-289.
- A. Streun et al., “Proposed Upgrade of the SLS Storage Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2922-2925.
- C. Bisegni et al., “Development of an Innovative Storage Manager for a Distributed Control System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC011, pp. 570-573.
- Y. M. Saveliev, D. J. Holder, B. D. Muratori, and S. L. Smith, “Results from ALICE (ERLP) DC Photoinjector Gun Commissioning”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC062, pp. 208-210.
- C. P. Welsch, M. G. Ibison, Y. Wei, J. D. A. Smith, and G. X. Xia, “Optimization of Dielectric Laser-Driven Accelerators”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4737-4740.
- G. V. Stupakov, “Beam Echo Effect For Generation Of Short-Wavelength Radiation”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper MOOB01, pp. 15-22.
- T. Schietinger et al., “Progress Report on the SwissFEL Injector Test Facility”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP065, pp. 1747-1749.
- K. N. Sjobak, R. Bruce, H. Burkhardt, A. Macpherson, A. Santamar?¡a Garc?¡a, and R. Kwee-Hinzmann, “Time Scale of Crab Cavity Failures Relevant for High Luminosity LHC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4196-4199.
- Y. Tsuzuki et al., “Polarimetry of Hard X-Rays from Highly Charged Ions Using a Si/CdTe Compton Camera”, presented at the 14th International Symposium of EBIS/T (EBIST2022), Whistler, BC, Canada, Jun. 2022, paper FR3WH01, unpublished.
- E. Meier, S. Biedron, G. LeBlanc, M. J. Morgan, and J. Wu, “Electron Beam Stabilisation Test Results Using a Neural Network Hybrid Controller at the Australian Synchotron and LINAC Coherent Light Source Projects”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper FROA02, pp. 766-771.
- O. A. Shevchenko and N. Vinokurov, “Statistical Theory of the SASE FEL Based on the Two-particle Correlation Function Equation”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper MOOA02, pp. 8-14.
- R. J. Barlow, T. R. Edgecock, C. Johnstone, H. L. Owen, and S. L. Sheehy, “PIP: A Low Energy Recycling Non-scaling FFAG for Security and Medicine”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWA037, pp. 3711-3713.
- L. Ma, P. A. Corlett, and A. J. Moss, “LLRF Characterisation of the Daresbury International Cryomodule”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME052, pp. 3046-3048.
- P. A. Corlett, L. Ma, and A. J. Moss, “Digital Low Level RF Development at Daresbury Laboratory”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC165, pp. 469-471.
- M. Boscolo et al., “Generation of a Multipulse Comb Beam and a Relative Twin Pulse FEL”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN035, pp. 989-991.
- F. Ciocci, G. Dattoli, L. Giannessi, and A. Torre, “Design of Hybrid Magnet Undulators with Non-Constant Parameters for High Gain, High Efficiency Free Electron Laser”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1027-1030.
- B. D. Muratori et al., “New Results from the EMMA Experiment”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEOAB01, pp. 2134-2136.
- J.-C. Chang, Y.-H. Liu, and Z.-D. Tsai, “Air Temperature Analysis and Control Improvement for the Injection Area at TLS”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA091, pp. 773-775.
- K. M. Hock, D. J. Holder, M. G. Ibison, B. D. Muratori, and A. Wolski, “Phase Space Tomography Research at Daresbury”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THOAB103, pp. 3096-3098.
Back to search