Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Chao, P. Corredoura, T. Limberg, H. Schwarz, and P. Wilson, “A Feedback for Longitudinal Instabilities in the SLC Damping Rings”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1806-1809.
[n] R. Jameson, “Accelerator-Driven Transmutation Technology for Energy Production and Nuclear Waste Treatment”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 230-235.
[n] Y. Arimoto et al., “Three Dimensional Field Analysis for Final Focus Magnet System at SuperKEKB”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2690-2692. doi:10.18429/JACoW-IPAC2014-WEPRI086
[n] E. Ezura, M. Kondoh, K. Kudo, and S. Takeda, “Longitudinal Behavior of the Beam in KEK Booster”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3538-3541.
[n] H. Okuno et al., “Design Study of the Injection and Extraction Systems for the RIKEN Superconducting Ring Cyclotron”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7W034, pp. 1075-1077.
[n] K. Endo, H. Fukuma, and F. Q. Zhang, “Preliminary Orbit Measurement for Beam Based Alignment”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP049L, pp. 1657-1659.
[n] Y. T. Ding, P. Emma, Z. Huang, and V. Kumar, “Optical Klystron Enhancement to SASE X-Ray FELs”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOBAU04, pp. 29-32.
[n] W. Seidel et al., “A Far-Infrared FEL for the Radiation Source ELBE”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP031, pp. XX-XX.
[n] H. Kobayashi et al., “Construction of a BNCT Facility using an 8-MeV High Power Proton Linac in Tokai”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR048, pp. 4083-4085.
[n] G. Boicourt and J. Merson, “Calculations on Permanent-Magnet Quadrupoles with Nonrectangular Cross Section”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-33, pp. 391-393.
[n] S. Fujishima et al., “Design Study of Sector Magnet for the RIKEN Superconducting Ring Cyclotron I”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP107G, pp. 2302-2304.
[n] G. Ganetis et al., “Misalignment Evaluation of Superconducting Magnets in the Relativistic Heavy Ion Collider”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP007G, pp. 2222-2224.
[n] W. Kalbreier, G. Roy, and F. Ruggiero, “A Vertical Mid-arc Separation System for an 8ex8e-Bunch Operation of LEP2 with 90/circ/60/circ Phase Advance Optics”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 448-451.
[n] Y. Iwashita and H. Fujisawa, “Half End-Cell Geometry of RFQ”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-33, pp. 698-700.
[n] S. Ghosh et al., “Design of a Compact Light Source Accelerator Facility at IUAC, Delhi”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP095, pp. 596-599.
[n] F. Zimmermann and F. Ruggiero, “Refined Models of Intrabeam Scattering”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper WEBY04, pp. 265-267.
[n] A. R. Jana and V. Kumar, “Design Studies for Medium and High beta SCRF Cavities for Indian Spallation Neutron Source”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP119, pp. 699-701.
[n] J. N. Bai, S. Xiao, T. G. Xu, and L. Zeng, “The Development of Timing Control System for RFQ”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper SUPB037, pp. 89-91.
[n] T. S. Dixit, Y. Shimosaki, and K. Takayama, “Adiabatic Damping of the Bunch-length in the Induction Synchrotron”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA099, pp. 244-246.
[n] H. Okuno, S. Fujishima, T. Tominaka, A. Goto, and Y. Yano, “Design and Construction of the Superconducting Bending Magnet for the Injection System of the RIKEN SRC”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P1-04, pp. XX-XX.
[n] J. Whealton, R. Raridon, K. Rothe, T. Owens, and W. Becraft, “Nonlinear Beam Dynamics in a Funnel for Combining Two Intense Ion Beams”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-04, pp. 38-47.
[n] M. T. Ronan et al., “Timing and RF Synchronization for Filling PEP/SPEAR with the SLC Damping Rings”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1577-1580.
[n] H. Okamoto, K. Fukushima, K. Ito, and T. Okano, “Recent Results from the S-POD Trap Systems on the Stability of Intense Hadron Beams”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper TUO2LR03, pp. 178-182.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Chao, P. Corredoura, T. Limberg, H. Schwarz, and P. Wilson, “A Feedback for Longitudinal Instabilities in the SLC Damping Rings”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1806-1809.
- R. Jameson, “Accelerator-Driven Transmutation Technology for Energy Production and Nuclear Waste Treatment”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 230-235.
- Y. Arimoto et al., “Three Dimensional Field Analysis for Final Focus Magnet System at SuperKEKB”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2690-2692.
- E. Ezura, M. Kondoh, K. Kudo, and S. Takeda, “Longitudinal Behavior of the Beam in KEK Booster”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3538-3541.
- H. Okuno et al., “Design Study of the Injection and Extraction Systems for the RIKEN Superconducting Ring Cyclotron”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7W034, pp. 1075-1077.
- K. Endo, H. Fukuma, and F. Q. Zhang, “Preliminary Orbit Measurement for Beam Based Alignment”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP049L, pp. 1657-1659.
- Y. T. Ding, P. Emma, Z. Huang, and V. Kumar, “Optical Klystron Enhancement to SASE X-Ray FELs”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper MOBAU04, pp. 29-32.
- W. Seidel et al., “A Far-Infrared FEL for the Radiation Source ELBE”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUPP031, pp. XX-XX.
- H. Kobayashi et al., “Construction of a BNCT Facility using an 8-MeV High Power Proton Linac in Tokai”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR048, pp. 4083-4085.
- G. Boicourt and J. Merson, “Calculations on Permanent-Magnet Quadrupoles with Nonrectangular Cross Section”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-33, pp. 391-393.
- S. Fujishima et al., “Design Study of Sector Magnet for the RIKEN Superconducting Ring Cyclotron I”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP107G, pp. 2302-2304.
- G. Ganetis et al., “Misalignment Evaluation of Superconducting Magnets in the Relativistic Heavy Ion Collider”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP007G, pp. 2222-2224.
- W. Kalbreier, G. Roy, and F. Ruggiero, “A Vertical Mid-arc Separation System for an 8ex8e-Bunch Operation of LEP2 with 90/circ/60/circ Phase Advance Optics”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 448-451.
- Y. Iwashita and H. Fujisawa, “Half End-Cell Geometry of RFQ”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-33, pp. 698-700.
- S. Ghosh et al., “Design of a Compact Light Source Accelerator Facility at IUAC, Delhi”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper TUP095, pp. 596-599.
- F. Zimmermann and F. Ruggiero, “Refined Models of Intrabeam Scattering”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper WEBY04, pp. 265-267.
- A. R. Jana and V. Kumar, “Design Studies for Medium and High beta SCRF Cavities for Indian Spallation Neutron Source”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP119, pp. 699-701.
- J. N. Bai, S. Xiao, T. G. Xu, and L. Zeng, “The Development of Timing Control System for RFQ”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper SUPB037, pp. 89-91.
- T. S. Dixit, Y. Shimosaki, and K. Takayama, “Adiabatic Damping of the Bunch-length in the Induction Synchrotron”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA099, pp. 244-246.
- H. Okuno, S. Fujishima, T. Tominaka, A. Goto, and Y. Yano, “Design and Construction of the Superconducting Bending Magnet for the Injection System of the RIKEN SRC”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P1-04, pp. XX-XX.
- J. Whealton, R. Raridon, K. Rothe, T. Owens, and W. Becraft, “Nonlinear Beam Dynamics in a Funnel for Combining Two Intense Ion Beams”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-04, pp. 38-47.
- M. T. Ronan et al., “Timing and RF Synchronization for Filling PEP/SPEAR with the SLC Damping Rings”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1577-1580.
- H. Okamoto, K. Fukushima, K. Ito, and T. Okano, “Recent Results from the S-POD Trap Systems on the Stability of Intense Hadron Beams”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper TUO2LR03, pp. 178-182.
Back to search