Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. Taggart, H. H. Fleischmann, H. Hopman, and M. R. Parker, “Successful Betatron Acceleration of Kiloampere Electron Rings in RECE-Christa”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3165-3168.
[n] J. Li, Y. Liu, X. Qi, and W. Q. Zhang, “Design of Digital Controller for Multi Module Series-parallel Accelerator Power Supply”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1288-1290. doi:10.18429/JACoW-IPAC2019-TUPMP023
[n] A. Y. Molodozhentsev and E. Forest, “Simulation of Resonances and Beam Loss for the J-PARC Main Ring”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA24, pp. 131-133.
[n] Z. Sun et al., “Electroplating of Sn Film on Nb Substrate for Generating Nb?Sn Thin Films and Post Laser Annealing”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 51-54. doi:10.18429/JACoW-SRF2019-MOP014
[n] K. K. Pant, B. Biswas, S. Krishnagopal, and S. Chouksey, “Fabrication and RF Studies on A Prototype PWT Linac Structure”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU402, pp. 302-304.
[n] B. W. Allardyce and K. Gase, “Use of a Secondary Emission Monitor in the Extraction Channel of the CERN Synchro-Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper E-05, pp. 355-357.
[n] T. W. Hardek et al., “Status of the Spallation Neutron Source Radio Frequency Systems”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP091, pp. 1045-1047.
[n] A. Kling and K. Balewski, “Frequency Maps at PETRA III”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA016, pp. 2511-2513.
[n] M. B?Âhnert, O. Hensler, D. Hoppe, and K. Zapfe, “Oil-free Pump Stations for Pumping of the Superconducting Cavities of the TESLA Test Facility”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT009, pp. XX-XX.
[n] P. Joshi, T. Matsumoto, S. Michizono, M. Omet, E. Kako, and Y. Yamamoto, “Waveguide system for an SRF cryomodule in KEK”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1495-1497. doi:10.18429/JACoW-IPAC2024-TUPR37
[n] K. Fujii et al., “Construction of a Test Magnet for JLC Final Focus”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU438, pp. 408-410.
[n] C. Boffo, D. Connolly, L. Elementi, and Y. Tereshkin, “Control System for the BCP Processing Facility at FNAL”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP04, pp. 278-281.
[n] J. Lee et al., “Bunch by Bunch Position Measurement and Analysis at PLS-II”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 232-234. doi:10.18429/JACoW-IPAC2016-MOPMR002
[n] Y. Tereshkin, C. Boffo, G. Davis, H. Edwards, and A. Rowe, “BCP Processing Facility”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP47, pp. 447-450.
[n] J.-F. Ostiguy and L. Michelotti, “CHEF: A Status Report”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN112, pp. 3486-3488.
[n] C. E. Reece, S. Castagnola, P. Denny, and A. L. A. Mitchell, “New Improved Horizontal Electropolishing System for SRF Cavities”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 237. doi:10.18429/JACoW-SRF2021-MOPTEV014
[n] A. Lumpkin, B. Yang, W. Gai, and W. Cieslik, “Initial Tests of the Dual-Sweep Streak Camera System Planned for APS Particle-Beam Diagnostics”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ11, pp. 2476-2478.
[n] A. H. Botha et al., “A New Multidisciplinary Separated-Sector Cyclotron Facility”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1118-1121.
[n] R. Byer, A. Mizrahi, L. Schaechter, and R. H. Siemann, “Dielectric Bragg Accelerator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FOAB009, pp. 728-730.
[n] M. Alsdorf, B. Dehning, M. Kwiatkowski, W. Vigano, and C. Zamantzas, “Implementation of an FPGA Based System Survey and Diagnostic Reader with the Aim to Increase the System Dependability”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA29, pp. 409-413.
[n] E. Tanabe, A. McEuen, M. Trail, G. Meddaugh, and S. Bandy, “Microwave Field Emission”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-74, pp. 525-527.
[n] N. P. Di Monte, “The P0 Feedback Control System Blurs the Line between IOC and FPGA”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN113, pp. 431-433.
[n] M. Farkhondeh, S. P. Holmberg, W. W. Sapp, and J. D. Zumbro, “Fiducialization of Magnets for the MIT-Bates SHR”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 634-637.
[n] R. Boni et al., “Status of the ARES R&D Program”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2973-2976.
[n] P. Letellier et al., “Commissioning of the 200 MeV Injector Linac for the Oxford Instr.-IBM Synchrotron Light Source”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1082-1085.
[n] Yu. P. Vakhrushin, Yu. A. Svistunov, M. F. Vorogushin, and D. V. Efremov, “The Problems of Ion Beams Modeling in Injectors and RFQ Linacs”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH429, pp. 665-667.
[n] A. Mochihashi, M. Katoh, M. Hosaka, K. Hayashi, and J. Yamazaki, “Ion-Related Phenomenon in UVSOR Electron Storage Ring”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP15022, pp. XX-XX.
[n] J. Norem, L. Bandura, E. Black, M. A. C. Cummings, and D. Errede, “Measurements of Beam Driven Hydrodynamic Turbulence”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAE026, pp. 1999-2001.
[n] Y. Futami et al., “Medical Application of the Positron Emitter Beam at HIMAC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5A01, pp. 2554-2556.
[n] D. J. Adams et al., “Operational Experience and Future Plans at ISIS”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 333-337. doi:10.18429/JACoW-HB2016-TUPM3Y01
[n] S. M. Glenn et al., “High-Precision Timing of Gated X-Ray Imagers at the National Ignition Facility”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOCA03, pp. 1449-1452.
[n] Y. Futami et al., “Spot Scanning System with RI Beam at HIMAC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP1A17, pp. 2548-2550.
[n] T. Takayanagi et al., “New Injection Bump Power Supply of the J-PARC RCS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2908-2910. doi:10.18429/JACoW-IPAC2015-WEPMA058
[n] R. Stassen, F. J. Etzkorn, R. Maier, D. Prasuhn, H. Stockhorst, and L. Thorndahl, “COSY as Ideal Test Facility for HESR RF and Stochastic Cooling Hardware”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP022, pp. 861-863.
[n] Y. K. Lin et al., “Statistical Analysis Package for the Opearion Monitoring at the TLS”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4019-4021. doi:10.18429/JACoW-IPAC2016-THPOW035
[n] K. Cho, D. H. Han, Y. D. Oh, D. Son, and J. Lee, “A Test-bed of DCAF (DeCentralized Analysis Farm) in Korea”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP507, pp. XX-XX.
[n] X. He, B. Deng, J. Lei, C. Meng, and S. Pei, “Development of Flexible Waveguide for High Power High Vacuum Applications in S-band”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2909-2911. doi:10.18429/JACoW-IPAC2019-WEPRB046
[n] A. A. Melnikov and S. A. Gavrilov, “Modernization and Operation of Ionization-proportional Gas Counter at INR RAS Proton Linac”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 103-106. doi:10.18429/JACoW-IBIC2020-WEPP04
[n] V. Zubko et al., “HTS Current Lead Optimization”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE007, pp. 2454-2456.
[n] S. Singh, J. N. Karande, V. Nanal, R. G. Pillay, and P. Singh, “Control and Information System for BARC ÔÇô TIFR Superconducting LINAC Booster”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper PO05, pp. 62-64.
[n] N. I. Moseiko et al., “The Power Supply System for Electron Beam Orbit Correctors and Focusing Lenses of Kurchatov Synchrotron Radiation Source”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC049, pp. 1180-1182.
[n] F. J. Haasbroek, P. Andersen, J. H. Langenhoven, F. M. Nortier, T. Rossouw, and T. N. Van der Walt, “Production of Radionuclides at the NAC Cyclotron Facility”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper K-08, pp. 559-562.
[n] J. Borburgh, T. Fowler, A. Prost, T. Kramer, and T. Stadlbauer, “Design of Electrostatic Septa and Fast Deflector for MedAustron”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS048, pp. 3532-3534.
[n] W. G. Davies, “Semi-Automatic Procedures for Matching the Emittance of the Injected Beam to the Chalk River Superconducting Cyclotron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2757-2760.
[n] C. W. Potts and F. R. Brumwell, “The Zero Gradient Synchrotron Closed Orbit Position Monitoring System”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 918-920.
[n] B. D. Hartsell, K. Anderson, J. Hylen, V. I. Sidorov, and S. Tariq, “LBNF Hadron Absorber: Mechanical Design and Analysis for 2.4MW Operation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3318-3320. doi:10.18429/JACoW-IPAC2015-WEPTY025
[n] A. I. Drozhdin, O. E. Krivosheev, and N. V. Mokhov, “Beam Loss and Collimation in the Fermilab 16 GeV Proton Driver”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH054, pp. 2572-2574.
[n] C. W. Potts and D. F. Marcks, “Self-Optimizing Target Control System”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 642-648.
[n] C. Yao, B. Deriy, G. Feng, H. Shang, and J. Wang, “Upgrade of the APS Booster Synchrotron Magnet Ramp”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP190, pp. 1181-1183.
[n] Y. Iino et al., “Fabrication Technique of Drift Tube with Permanent Quadrupole Magnet for the Linac of the JHP”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO429, pp. 123-125.
[n] S. Krishnagopal and S. A. Samant, “Effect of mirror-tilt on the mode-structure in an oscillator FEL”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC085, pp. 3092-3094.
[n] Y. Kim, K. Floettmann, T. Limberg, and D. Son, “S2E Simulations on Jitter for European XFEL Project”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF016, pp. 336-338.
[n] K. P. Harrig, V. P. Nagaslaev, E. Prebys, and S. J. Werkema, “Simulation of Bunch Formation for the Mu2e Experiment”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2180-2182. doi:10.18429/JACoW-IPAC2022-WEPOTK053
[n] T. Toyama et al., “Measurement of Transverse Multipole Moments of the Proton Beam in the J-PARC MR”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 274-276. doi:10.18429/JACoW-IPAC2017-MOPAB069
[n] G. Rakowsky, J. J. Aspenleiter, W. S. Graves, L. Solomon, and P. M. Stefan, “Magnetic Measurements on an In-Vacuum Undulator for the NSLS X-Ray Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P021, pp. 3497-3499.
[n] A. A. Asseev, M. Yu. Gorin, and P. T. Pashkov, “The Efficiency Analysis of the Proton Beam Extraction from the IHEP Accelerator by a Bent Silicon Crystal”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP054G, pp. 2412-2414.
[n] P. Roussel and J. M. De Coster, “An Achromatic Beam Transfer System with a Strongly Negative Equivalent Length”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-38, pp. 521-523.
[n] F. Li et al., “Design and Programming of a Multifunctional Device for Accelerator Beam Profile Measurement and Beam Stop”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 413-416. doi:10.18429/JACoW-IBIC2025-TUPCO24
[n] I. D. Valova, “Intuitionistic Fuzzy (IF) Evaluations of Multidimensional Model”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS012, pp. 805-807.
For LaTeX
Use Complete Form
For BibTeX
References
- D. Taggart, H. H. Fleischmann, H. Hopman, and M. R. Parker, “Successful Betatron Acceleration of Kiloampere Electron Rings in RECE-Christa”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3165-3168.
- J. Li, Y. Liu, X. Qi, and W. Q. Zhang, “Design of Digital Controller for Multi Module Series-parallel Accelerator Power Supply”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1288-1290.
- A. Y. Molodozhentsev and E. Forest, “Simulation of Resonances and Beam Loss for the J-PARC Main Ring”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGA24, pp. 131-133.
- Z. Sun et al., “Electroplating of Sn Film on Nb Substrate for Generating Nb?Sn Thin Films and Post Laser Annealing”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 51-54.
- K. K. Pant, B. Biswas, S. Krishnagopal, and S. Chouksey, “Fabrication and RF Studies on A Prototype PWT Linac Structure”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU402, pp. 302-304.
- B. W. Allardyce and K. Gase, “Use of a Secondary Emission Monitor in the Extraction Channel of the CERN Synchro-Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper E-05, pp. 355-357.
- T. W. Hardek et al., “Status of the Spallation Neutron Source Radio Frequency Systems”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP091, pp. 1045-1047.
- A. Kling and K. Balewski, “Frequency Maps at PETRA III”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA016, pp. 2511-2513.
- M. B?Âhnert, O. Hensler, D. Hoppe, and K. Zapfe, “Oil-free Pump Stations for Pumping of the Superconducting Cavities of the TESLA Test Facility”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PT009, pp. XX-XX.
- P. Joshi, T. Matsumoto, S. Michizono, M. Omet, E. Kako, and Y. Yamamoto, “Waveguide system for an SRF cryomodule in KEK”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR37, pp. 1495-1497.
- K. Fujii et al., “Construction of a Test Magnet for JLC Final Focus”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU438, pp. 408-410.
- C. Boffo, D. Connolly, L. Elementi, and Y. Tereshkin, “Control System for the BCP Processing Facility at FNAL”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP04, pp. 278-281.
- J. Lee et al., “Bunch by Bunch Position Measurement and Analysis at PLS-II”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 232-234.
- Y. Tereshkin, C. Boffo, G. Davis, H. Edwards, and A. Rowe, “BCP Processing Facility”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP47, pp. 447-450.
- J.-F. Ostiguy and L. Michelotti, “CHEF: A Status Report”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN112, pp. 3486-3488.
- C. E. Reece, S. Castagnola, P. Denny, and A. L. A. Mitchell, “New Improved Horizontal Electropolishing System for SRF Cavities”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 237.
- A. Lumpkin, B. Yang, W. Gai, and W. Cieslik, “Initial Tests of the Dual-Sweep Streak Camera System Planned for APS Particle-Beam Diagnostics”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ11, pp. 2476-2478.
- A. H. Botha et al., “A New Multidisciplinary Separated-Sector Cyclotron Facility”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1118-1121.
- R. Byer, A. Mizrahi, L. Schaechter, and R. H. Siemann, “Dielectric Bragg Accelerator”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FOAB009, pp. 728-730.
- M. Alsdorf, B. Dehning, M. Kwiatkowski, W. Vigano, and C. Zamantzas, “Implementation of an FPGA Based System Survey and Diagnostic Reader with the Aim to Increase the System Dependability”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPA29, pp. 409-413.
- E. Tanabe, A. McEuen, M. Trail, G. Meddaugh, and S. Bandy, “Microwave Field Emission”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-74, pp. 525-527.
- N. P. Di Monte, “The P0 Feedback Control System Blurs the Line between IOC and FPGA”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN113, pp. 431-433.
- M. Farkhondeh, S. P. Holmberg, W. W. Sapp, and J. D. Zumbro, “Fiducialization of Magnets for the MIT-Bates SHR”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 634-637.
- R. Boni et al., “Status of the ARES R&D Program”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2973-2976.
- P. Letellier et al., “Commissioning of the 200 MeV Injector Linac for the Oxford Instr.-IBM Synchrotron Light Source”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1082-1085.
- Yu. P. Vakhrushin, Yu. A. Svistunov, M. F. Vorogushin, and D. V. Efremov, “The Problems of Ion Beams Modeling in Injectors and RFQ Linacs”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH429, pp. 665-667.
- A. Mochihashi, M. Katoh, M. Hosaka, K. Hayashi, and J. Yamazaki, “Ion-Related Phenomenon in UVSOR Electron Storage Ring”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP15022, pp. XX-XX.
- J. Norem, L. Bandura, E. Black, M. A. C. Cummings, and D. Errede, “Measurements of Beam Driven Hydrodynamic Turbulence”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAE026, pp. 1999-2001.
- Y. Futami et al., “Medical Application of the Positron Emitter Beam at HIMAC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5A01, pp. 2554-2556.
- D. J. Adams et al., “Operational Experience and Future Plans at ISIS”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 333-337.
- S. M. Glenn et al., “High-Precision Timing of Gated X-Ray Imagers at the National Ignition Facility”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THCOCA03, pp. 1449-1452.
- Y. Futami et al., “Spot Scanning System with RI Beam at HIMAC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP1A17, pp. 2548-2550.
- T. Takayanagi et al., “New Injection Bump Power Supply of the J-PARC RCS”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2908-2910.
- R. Stassen, F. J. Etzkorn, R. Maier, D. Prasuhn, H. Stockhorst, and L. Thorndahl, “COSY as Ideal Test Facility for HESR RF and Stochastic Cooling Hardware”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP022, pp. 861-863.
- Y. K. Lin et al., “Statistical Analysis Package for the Opearion Monitoring at the TLS”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4019-4021.
- K. Cho, D. H. Han, Y. D. Oh, D. Son, and J. Lee, “A Test-bed of DCAF (DeCentralized Analysis Farm) in Korea”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP507, pp. XX-XX.
- X. He, B. Deng, J. Lei, C. Meng, and S. Pei, “Development of Flexible Waveguide for High Power High Vacuum Applications in S-band”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2909-2911.
- A. A. Melnikov and S. A. Gavrilov, “Modernization and Operation of Ionization-proportional Gas Counter at INR RAS Proton Linac”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 103-106.
- V. Zubko et al., “HTS Current Lead Optimization”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE007, pp. 2454-2456.
- S. Singh, J. N. Karande, V. Nanal, R. G. Pillay, and P. Singh, “Control and Information System for BARC ÔÇô TIFR Superconducting LINAC Booster”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper PO05, pp. 62-64.
- N. I. Moseiko et al., “The Power Supply System for Electron Beam Orbit Correctors and Focusing Lenses of Kurchatov Synchrotron Radiation Source”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC049, pp. 1180-1182.
- F. J. Haasbroek, P. Andersen, J. H. Langenhoven, F. M. Nortier, T. Rossouw, and T. N. Van der Walt, “Production of Radionuclides at the NAC Cyclotron Facility”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper K-08, pp. 559-562.
- J. Borburgh, T. Fowler, A. Prost, T. Kramer, and T. Stadlbauer, “Design of Electrostatic Septa and Fast Deflector for MedAustron”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS048, pp. 3532-3534.
- W. G. Davies, “Semi-Automatic Procedures for Matching the Emittance of the Injected Beam to the Chalk River Superconducting Cyclotron”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2757-2760.
- C. W. Potts and F. R. Brumwell, “The Zero Gradient Synchrotron Closed Orbit Position Monitoring System”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 918-920.
- B. D. Hartsell, K. Anderson, J. Hylen, V. I. Sidorov, and S. Tariq, “LBNF Hadron Absorber: Mechanical Design and Analysis for 2.4MW Operation”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3318-3320.
- A. I. Drozhdin, O. E. Krivosheev, and N. V. Mokhov, “Beam Loss and Collimation in the Fermilab 16 GeV Proton Driver”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH054, pp. 2572-2574.
- C. W. Potts and D. F. Marcks, “Self-Optimizing Target Control System”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 642-648.
- C. Yao, B. Deriy, G. Feng, H. Shang, and J. Wang, “Upgrade of the APS Booster Synchrotron Magnet Ramp”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP190, pp. 1181-1183.
- Y. Iino et al., “Fabrication Technique of Drift Tube with Permanent Quadrupole Magnet for the Linac of the JHP”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO429, pp. 123-125.
- S. Krishnagopal and S. A. Samant, “Effect of mirror-tilt on the mode-structure in an oscillator FEL”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC085, pp. 3092-3094.
- Y. Kim, K. Floettmann, T. Limberg, and D. Son, “S2E Simulations on Jitter for European XFEL Project”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF016, pp. 336-338.
- K. P. Harrig, V. P. Nagaslaev, E. Prebys, and S. J. Werkema, “Simulation of Bunch Formation for the Mu2e Experiment”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2180-2182.
- T. Toyama et al., “Measurement of Transverse Multipole Moments of the Proton Beam in the J-PARC MR”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 274-276.
- G. Rakowsky, J. J. Aspenleiter, W. S. Graves, L. Solomon, and P. M. Stefan, “Magnetic Measurements on an In-Vacuum Undulator for the NSLS X-Ray Ring”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P021, pp. 3497-3499.
- A. A. Asseev, M. Yu. Gorin, and P. T. Pashkov, “The Efficiency Analysis of the Proton Beam Extraction from the IHEP Accelerator by a Bent Silicon Crystal”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP054G, pp. 2412-2414.
- P. Roussel and J. M. De Coster, “An Achromatic Beam Transfer System with a Strongly Negative Equivalent Length”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-38, pp. 521-523.
- F. Li et al., “Design and Programming of a Multifunctional Device for Accelerator Beam Profile Measurement and Beam Stop”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 413-416.
- I. D. Valova, “Intuitionistic Fuzzy (IF) Evaluations of Multidimensional Model”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKS012, pp. 805-807.
Back to search