JaCoW Logo

Reference Search

Warning
Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	M. Abo-Bakr, K. B??rkmann, V. D??rr, and J. Kolbe, “MULTIPOLE MAGNETS FOR THE METROLOGY LIGHT SOURCE (PTB, BERLIN)”, in Proc. RuPAC'06, Novosibirsk, Russia, Sep. 2006, paper MOHP11, pp. XX-XX. 
[n]	A. Jakob, H. Klein, A. Lakatos, and J. Pozimski, “Extraction and Low Energy Transport of Negative Ions”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP21C, pp. 1400-1402. 
[n]	S. Kopp et al., “The NuMI Hadronic Hose”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH160, pp. 1598-1600. 
[n]	E. Viklund, D. Burk, D. Seidman, and S. Posen, “Mechanical Polishing of Nb3Sn Thin-Film Cavities”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPA180, unpublished. 
[n]	R. Valizadeh et al., “First Full Cryogenic Test of the SRF Thin Film Test Cavity”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 644-646. doi:10.18429/JACoW-SRF2017-TUPB104
[n]	M. G. Minty, C. Adolphsen, L. J. Hendrickson, R. Sass, T. Slaton, and M. Woodley, “Feedback Performance at the Stanford Linear Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPB03, pp. 662-664. 
[n]	A. C. Paul, S. L. Allen, F. W. Chambers, Y.-J. Chen, F. J. Deadrick, and W. C. Turner, “ETA-II Beam Brightness Measurement”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3106-3109. 
[n]	R. F. Lambiase, W. Buxton, B. Oerter, S. Peng, J. Pepe, and J. Smith, “Performance Results for the BNL PSI Designed for the SNS and it's Application to Other Accelerators”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE120, pp. 2493-2495. 
[n]	G. A. Bowers et al., “User Interface Framework for the National Ignition Facility (NIF)”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPA26, pp. 146-148. 
[n]	Y.-C. Chao et al., “Achieving Beam Quality Requirements for Parity Experiments at Jefferson Lab”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT163, pp. 1509-1511. 
[n]	C. Contreras-Martinez, Y. M. Pischalnikov, W. Schappert, A. I. Sukhanov, and J. C. Yun, “Microphonics Studies at STC in Fermilab”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 743-746. doi:10.18429/JACoW-NAPAC2019-WEPLM66
[n]	L. Celona et al., “Commissioning of the AISHA Ion Source at INFN-LNS”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 10-13. doi:10.18429/JACoW-ECRIS2018-MOB3
[n]	J. P. Lidestri, V. Bailey, J. A. Edighoffer, S. D. Putnam, M. G. Tiefenback, and D. Wake, “Experimental Observations of Beam Transport in Twisted Quadrupole Fields”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3120-3123. 
[n]	S. Wilde et al., “Physical Vapour Deposition of NbTiN Thin Films for Superconducting RF Cavities”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1102-1104. doi:10.18429/JACoW-IPAC2017-MOPVA104
[n]	W. Smith et al., “Status of the CLARA Control System”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1162. doi:10.18429/JACoW-ICALEPCS2019-WEPHA037
[n]	J. Kaugerts, P. F. Dahl, I. Polk, and W. Sampson, “ISABELLE Insertion Quadrupoles”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4036-4039. 
[n]	R. L. Kustom, F. R. Brumwell, E. F. Parker, C. W. Potts, and R. B. Wehrle, “A New Diagnostic System for Studying the Injector and Injection at the Zero Gradient Synchrotron (ZGS)”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 518-523. 
[n]	T. Rinckel et al., “Construction Plans for the LENS Proton Linac”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MOP050, pp. 156-158. 
[n]	M. Mayerhofer and G. Dollinger, “Support structures and their removal improve performance of additively manufactured RF cavities”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPS67, unpublished. 
[n]	B. Cros et al., “Electron Injector for Multi-Stage Laser-Driven Plasma Accelerators”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3244-3246. doi:10.18429/JACoW-IPAC2017-WEPVA001
[n]	E. Tanabe, M. Bayer, and M. Trail, “A Small Diameter Standing Wave Linear Accelerator Structure”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2975-2978. 
[n]	G. Kazakevich, R. Johnson, T. Khabiboulline, V. Yakovlev, and Y. Eidelman, “On the life expectance of high-power CW magnetrons for SRF accelerators”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 513-515. doi:10.18429/JACoW-LINAC2024-TUPB091
[n]	T. Kroc, “A Quadrupole Magnet for the Fermilab Linac Upgrade”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2378-2381. 
[n]	G. Bassato and W. Zou, “Experience Using Credit-Card Size Boards Based on Coldfire Processors and Running Under ucLinux”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEP011, pp. 189-191. 
[n]	B. Campbell and R. Ranganathan, “An Experiemental and Analytical Study of a Buoyancy Driven Cooling System for a Particle Accelerator”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1402-1405. 
[n]	J. Friedrich et al., “Properties of the GSI HLI-RFQ Structure”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3044-3047. 
[n]	J. A. Edighoffer, “Beam Breakup Considerations in the Design of Multiple Off-Axis Gaps in an Induction Accelerator Cell for SLIA”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3117-3120. 
[n]	J. Y. Liu, H. B. Chen, A. Grudiev, J. Shi, and H. Zha, “Wakefield Suppression in the Main LINAC of the Klystron-Based First Stage of CLIC at 380 GeV”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2899-2902. doi:10.18429/JACoW-IPAC2019-WEPRB043
[n]	C. Lingwood, G. Burt, K. Gunn, and J. D. A. Smith, “Evolutionary Algorithms in the Design of Crab Cavities”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC056, pp. 1850-1852. 
[n]	Y. Chung et al., “Local Beam Position Feedback Experiments on the ESRF Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ15, pp. 2699-2701. 
[n]	F. Zimmermann et al., “CLIC Polarized Positron Source Based on Laser Compton Scattering”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS060, pp. 2520-2522. 
[n]	R. M. Lill, G. Decker, J. E. Hoyt, X. Sun, and B. X. Yang, “Design, Installation, and Commissioning Results for Suppressing Rogue TE Modes Impacting Vertical BPM Readings of the APS Storage Ring”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG012, pp. 50-52. 
[n]	B. Groussin, M. Martinez-Calderon, E. Granados, and B. Marsh, “Simulation of plasmonic effects in nanostructured copper surfaces for field-assisted photoemission”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1354-1357. doi:10.18429/JACoW-IPAC2023-TUPA002
[n]	L. Smith, “Beam Dynamics in Heavy Ion Induction Linacs”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper D101, pp. 111-115. 
[n]	M. A. Gundersen, G. Kirkman, R. Liou, and T. Hsu, “High Current, Low Energy Electron Beams Produced During the High Current Phase of a Pseudospark”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3066-3069. 
[n]	P. Bauer et al., “Synchrotron Radiation Absorbers for Hadron Colliders”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPDO015, pp. 2541-2543. 
[n]	A. Stevens, T. Clifford, and R. Frankel, “Distribution of Computer Functionality for Accelerator Control at the Brookhaven AGS”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2023-2026. 
[n]	J. Jarvis et al., “The Optical Stochastic Cooling Program at Fermilab”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPA039, unpublished. 
[n]	J. M. Garland et al., “A Discharge Plasma Source Development Platform for Accelerators: The ADVANCE Lab at DESY”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1886-1888. doi:10.18429/JACoW-IPAC2022-WEPOPT021
[n]	T. Overton, J. Jones, T. Pacey, L. Reid, and E. Snedden, “Simulation study of beam-driven plasma wakefield experiments on CLARA”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1353-1356. doi:10.18429/JACoW-IPAC2025-TUPM086
[n]	C. Swain, ?û. Apsimon, A. Salehilashkajani, C. P. Welsch, J. Wolfenden, and H. D. Zhang, “A Modified Nomarski Interferometer to Study Supersonic Gas Jet Density Profiles”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 385-388. doi:10.18429/JACoW-IPAC2022-MOPOPT054
[n]	M. Mayerhofer, J. Mitteneder, C. Wittig, I. Prestes, E. Jägle, and G. Dollinger, “First high quality DTL cavity additively manufactured from pure copper”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4967-4970. doi:10.18429/JACoW-IPAC2023-THPM035
[n]	J. Juanhuix and M. Traveria, “Magnetic design and light characteristics of a Wiggler for the LLS”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP21G, pp. 2228-2230. 
[n]	J. Dietrich, C. Boehme, A. H. Botha, J. L. Conradie, P. F. Rohwer, and T. Weis, “Beam Profile Measurements Based on Light Radiation of Atoms Excited by the Particle Beam”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN020, pp. 3955-3957. 
[n]	S. Hunt, D. Mathieson, K. Low, and C. Kalbfleisch, “High Speed Serial Communications for Control Systems”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1826-1829. 
[n]	S. Sampayan et al., “High Gradient Insulator Technology for the Dielectric Wall Accelerator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAA19, pp. 1269-1271. 
[n]	R. Averill et al., “Superconducting Solenoids for the Polarized Electron Spin Control System of the MIT-Bates South Hall Ring (SHR)”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P008, pp. 3407-3409. 
[n]	Z. Amirkhanyan et al., “Comparison of measurements and simulation results of dose for the FLASH radiation therapy beamline at PITZ”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4996-4999. doi:10.18429/JACoW-IPAC2023-THPM049
[n]	M. Stirbet et al., “RF Conditioning and Testing of Fundamental Power Couplers for SNS Superconducting Cavity Production”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT083, pp. 4132-4134. 
[n]	D. Rees et al., “LANSCE RF System Refurbishment”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT037, pp. 2476-2478. 
[n]	A. Romanov, J. Santucci, and G. Stancari, “Experimental 4D tracking of a single electron in IOTA”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3359-3362. doi:10.18429/JACoW-IPAC2023-WEPL108
[n]	R. M. Mobley, G. Gammel, and A. W. Maschke, “Gabor Lenses”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3112-3115. 
[n]	H. Podlech et al., “The MYRRHA Project”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 945-950. doi:10.18429/JACoW-NAPAC2019-THZBA2
[n]	M. Martinello et al., “Trapped Flux Surface Resistance Analysis for Different Surface Treatments”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB015, pp. 115-119. 
[n]	S. V. Khruschev et al., “9 Tesla Superbend for BESSY-2”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP14005, pp. XX-XX. 
[n]	M. R. Shubaly, R. G. Maggs, and A. E. Weeden, “A High-Current Oxygen Ion Source”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1751-1754. 
[n]	J. J. Kritzinger, R. E. F. Fenemore, and M. J. van Niekerk, “The Radio-Frequency System of the NAC 200 MeV Separated-Sector Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I2-08, pp. 357-360. 
[n]	A. M??ller, H. N. Jungwirth, A. N. Schreuder, H. A. Smit, and F. M. Smith, “A New Post-Collimation Trimmer for Neutron Therapy at NAC”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper A-29, pp. 119-122. 
[n]	A. M. Ferrari and S. Pissanetzky, “Recent Extensions of the Program Magnus-3D for Three-Dimensional Accelerator Magnetic Engineering”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1315-1318. 
[n]	J. B?ñhr, D. Lipka, and H. L??decke Deutsches Elektronen-Synchrotron, “Optical Transmission Line For Streak Camera Measurements at Pitz”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PM05, pp. XX-XX. 
[n]	R. Ursic, K. Mahoney, C. Hovater, A. Hutton, and C. Sinclair, “CEBAF Beam Loss Accounting”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPC26, pp. 2652-2654. 
[n]	W. K??hn, “Investigation of Additional Losses of Superconducting Cavities Due to Field Dependent Effects at High Levels”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper H-6, pp. 765-769. 
[n]	M. Kuchnir and K. Koepke, “Pressure Development During Energy Doubler Quenches”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4045-4047. 
[n]	S. Y. Lee et al., “The RHIC Lattice”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 773-776. 
[n]	E. V. Bulyak et al., “Beam Dynamics in Compton-ring Gamma Sources”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH097, pp. 2143-2145. 
[n]	K. Yu, Q. S. Shu, K. K. Leung, and J. Zbasnik, “Effective Stress of the SSC 80 K Synchrotron Radiation Liner in a Quenching Dipole Magnet”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2787-2790. 
[n]	E. van der Kraaij et al., “MRI-Guided-PT: Integrating an MRI in a Proton Therapy System”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 144-147. doi:10.18429/JACoW-CYCLOTRONS2019-TUB03
[n]	A. K. Kaminsky et al., “Status of 30 GHz Facility for Experimental Investigation of the Copper Cavity Lifetime (Clic Collider Project)”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THPOS37, pp. XX-XX. 
[n]	A. V. Elzhov et al., “Features of FEM for Testing of High-gradient Accelerating Structures of Linear Colliders”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE112, pp. 2308-2310. 
[n]	J. L. Conradie, J. C. Cornell, D. T. Fourie, and G. C. W. Lloyd, “Measurements of Quadrupole Magnets”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I1-12, pp. 321-324. 
[n]	H. Hinterberger, S. Pruss, J. Satti, J. Schivell, C. Schmidt, and R. Sheldon, “Quadrupole Magnets of the NAL Main Accelerator”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 857-860. 
[n]	C. Pillai et al., “Performance of the LANSCE H$^-$ Source and Low Energy Beam Transport at Higher Peak Current”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6W021, pp. 2743-2745. 
[n]	D. Banerjee et al., “Target Bypass Beam Optics for Future High Intensity Fixed Target Experiments in the CERN North Area”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3046-3048. doi:10.18429/JACoW-IPAC2021-WEPAB185
[n]	E. S. Park, H. S. Han, Y. M. Koo, and Y. G. Nah, “Engineering Design of the PLS 2 GeV Storage Ring Dipole Magnet”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2345-2348. 
[n]	M. Deniaud and S. Boogert, “Implementation of novel acceleration functionality in BDSIM”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1601-1603. doi:10.18429/JACoW-IPAC2025-TUPS110
[n]	J. Jarvis et al., “The optical stochastic cooling program at Fermilab”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS120, unpublished. 
[n]	C. Hovjat et al., “The Multiturn Charge Exchange Injection System for the Fermilab Booster Accelerator”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3149-3152. 
[n]	E. W. Blackmore, D. A. Dohan, G. H. Mackenzie, and R. Poirier, “Developments Toward Separated Turns at TRIUMF”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-29, pp. 485-487. 
[n]	M. Mehler, O. Boine-Frankenheim, O. Chorniy, and O. K. Kester, “Longitudinal Dynamics of Intense Heavy-Ion Bunches in SIS-100”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR003, pp. 2937-2939. 
[n]	R. Olsen, J. Murray, and J. Dabrowski, “Digital Signal Array Processor for NSLS Booster Power Supply Upgrade”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1855-1858. 
[n]	S. Oh, W. H. Moore, and M. Yoon, “Design Study for Axial Injection of Polarized Ions into the Princeton University Cyclotron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3033-3036. 
[n]	L. Maindive et al., “Continuous integration on top of the existing control system of LIPAc, for a RF conditioning test bench”, presented at the ICALEPCS'25, Chicago, IL, USA, Sep. 2025, paper TUPD025, unpublished. 
[n]	V. Bailey, R. Curry, J. P. Lidestri, M. Tiefenback, and D. Wake, “Magnet Design for SLIA Proof-of-Concept Experiment”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3123-3126. 
[n]	G. Strangolino and L. Zambon, “canone3: A New Service and Development Framework for the Web and Platform Independent Applications”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 1023-1028. doi:10.18429/JACoW-ICALEPCS2021-FRAR02
[n]	E. A. Hughes, G. I. Figura, and N. Marks, “Beam Lifetime on the Daresbury SRS”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3113-3116. 
[n]	H. Bui, G. Decker, R. M. Lill, W. E. Norum, and A. F. Pietryla, “Performance of FPGA-based Data Acquisition for the APS Broadband Beam Position Monitor System”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF001, pp. 80-84. 
[n]	H. Heydari, “Remarks on the Differential Luminosity in the Weak Disruption and the Transition Region”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 411-414. 
[n]	N. M. Kroll, C.-K. Ng, J. Judkins, and M. Neubauer, “Design of Traveling Wave Windows for the PEP-II RF Coupling Network”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPQ10, pp. 1741-1743. 
[n]	H. H. Lu et al., “Development of a PrFeB Cryogenic Permanent Magnet Undulator (CPMU) Prototype at IHEP”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1469-1471. doi:10.18429/JACoW-IPAC2017-TUPAB064
[n]	E. Wang, J. Skaritka, J. Biswas, and V. Ranjbar, “The design progress of a high charge low energy spread polarized pre injector for Electron Ion Collider”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 114-117. doi:10.18429/JACoW-IPAC2024-MOPC24
[n]	G. Derevyankin et al., “STATUS OF HIGH-CURRENT ELECTROSTATIC ACCELERATOR -TANDEM FOR THE NEUTRON THERAPY FACILITY”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THP047, pp. XX-XX. 
[n]	R. Bacher, “The Web2cToolkit: A Framework for Thin Ajaxian Control System Clients”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEX01, pp. 140-142. 
[n]	C. M. Lyneis, J. Sayag, H. A. Schwettman, and J. P. Turneaure, “Performance of a Superconducting Accelerator Structure with a Modified Geometry”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3755-3757. 
[n]	L. G. Ratner, E. A. Crosbie, T. K. Kohe, and G. J. Marmer, “Resonant Extraction at the Zero Gradient Synchrotron (ZGS)”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1002-1004. 
[n]	P. Martín-Luna, A. Bonatto, C. Bontoiu, G. Xia, J. Resta-Lopez, and J. Rodríguez Pérez, “Particle beam-driven wakefield in carbon nanotubes: hydrodynamic model vs PIC simulations”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 496-499. doi:10.18429/JACoW-IPAC2024-MOPR19

For LaTeX

Use Complete Form

For BibTeX

References

Back to search