Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. G. Mazarakis et al., “Experimental Investigation of Certain Beam Transport Issues in a Pulsed Transmission Line Linear Accelerator”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper FRQ0004, pp. 466-468.
[n] R. Pardo and G. P. Zinkann, “Long-Term Operating Experience for the ATLAS Superconducting Resonators”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper MOA003, pp. 10-14.
[n] S. M. Oprondek et al., “Next Generation X-ray Beam Position Monitor System for the Advanced Photon Source MBA Upgrade”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 99-101. doi:10.18429/JACoW-MEDSI2018-TUPH29
[n] E. Huttel, I. A. Abid, and S. Kh. Jafar, “The Pulsed Power Supplies of the SESAME Booster and Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3415-3417. doi:10.18429/JACoW-IPAC2017-WEPVA064
[n] G. Vecchio et al., “A New Flexible and Interactive Control System for the INFN-LNS Accelerators and Beamlines”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper TUPP13, unpublished.
[n] G. Gaitan et al., “Development of a System for Coating SRF Cavities Using Remote Plasma CVD”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 129. doi:10.18429/JACoW-SRF2021-SUPTEV007
[n] K. Saito et al., “Superiority of Electropolishing over Chemical Polishing on High Gradients”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D02, pp. 795-813.
[n] A. V. Zlobin et al., “TEST RESULTS OF A NB3SN QUADRUPOLE COIL IMPREGNATED WITH RADIATION-RESISTANT MATRIMID 5292”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME045, pp. 3612-3614.
[n] C. E. Adolphsen, P. J. Emma, T. H. Fieguth, and W. L. Spence, “Chromatic Correction in the SLC Bunch Length Compressors”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 503-506.
[n] L. Garabito Ruiz, N. Evans, A. Hoover, and S. Lund, “Simulation of improved injection kicker waveforms in the SNS accumulator ring”, presented at the HIAT'25, East Lansing, MI, USA, Jun. 2025, paper MOP02, unpublished.
[n] Y. A. Svistunov, A. P. Durkin, and A. D. Ovsyannikov, “Beam Dynamics Investigations for 433 MHz RFQ Accelerator”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper TUCCH02, pp. 82-84.
[n] U. Becker, “CST's Commercial Beam-Physics Codes”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper THM2IS03, pp. 308-308.
[n] J. T. Seeman and J. C. Sheppard, “Special SLC Linac Developments”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE1-2, pp. 214-219.
[n] H. Smith, T. Constant, K. Crook, J. Fitch, and T. Taylor, “Radiation and Electrical Safety Systems for PEP”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2800-2803.
[n] M. G. Mazarakis et al., “'Smile'' a New Version for the RADLAC II Linear Accelerator”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU448, pp. 438-440.
[n] T. E. Plawski, R. Bachimanchi, C. Hovater, D. J. Seidman, and M. J. Wissmann, “LLRF System for the CEBAF Separator Upgrade”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP133, pp. 1171-1173.
[n] J. Ferm?®, F. Ripouteau, J. L. Belmont, G. Laborie, and G. Goin, “Grenoble Cycloton Progress Report”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69A18, pp. XX-XX.
[n] A. V. Bondarenko, Y. H. Han, Y. U. Jeong, B. C. Lee, S. V. Miginsky, and S. H. Park, “The Design of a 1.8 keV Compton X-ray Generator for a SC RF Linac at KAERI”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH057, pp. 169-171.
[n] J. Plouin, J.-P. Charrier, C. Magne, J. Novo, and L. Maurice, “Experimental Investigations of the Quench Phenomena for the Quench Localization by the Second Sound Wave Method”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP111, pp. 739-742.
[n] M. G. Mazarakis, G. H. Berry, and E. P. Colton, “XeN - XeN Charge Exchange Experiment Using a Split-Beam and Beam Intersection Technique”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3184-3187.
[n] N. G. Wilson and D. Precechtel, “Mechanical Design and Fabrication of a 425-MHz H-Buncher”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1851-1854.
[n] K. Nam and J. Choi, “A Study of a TBA Lattice for the Pohang Light Source”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1399-1402.
[n] S. Zaremba et al., “Beam Dynamics in Newly Designed Cyclotrons at Ion Beam Applications”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1774-1777.
[n] G. J. Caporaso et al., “Beam-Target Interaction Experiments For Bremsstrahlung Converters Applications”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUB13, pp. 464-466.
[n] V. E. Scarpine et al., “First Beam Measurements of the FNAL HINS RFQ”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM076, pp. 359-363.
[n] Y. Jaski, “Closing Remarks”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, paper THCL01, pp. XX-XX.
[n] I. V. Rybakov and I. I. Isaev, “Estimation of Multipacting in CDS Structure”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 288-290. doi:10.18429/JACoW-RUPAC2016-TUPSA035
[n] Z. A. Conway, R. L. Fischer, M. P. Kelly, A. Kolomiets, B. Mustapha, and P. N. Ostroumov, “A Comparison of Superconducting RF Structures Optimized for = 0.285”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP044, pp. 889-891.
[n] R. Pardo, Y. Kawarasaki, and K. Wasniewski, “A CAMAC-Based Intelligent Subsystem for ATLAS, Example Application: Cryogenic Monitoring and Control”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2017-2020.
[n] S. Sampayan, G. Caporaso, D. Trimble, and G. Westenskow, “Emission, Plasma Formation, and Brightness of a PZT Ferroelectric Cathode”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPE14, pp. 899-901.
[n] Y. J. Yuan, Y. N. Rao, B. W. Wei, and J. W. Xia, “Simulation of RF Stacking and Multiple Single-Turn Injection and Multiturn Injection”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper H-11, pp. 479-482.
[n] M. Mizumoto et al., “A High Intensity Proton Linac Development for the JAERI Neutron Science Project”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU1004, pp. 349-356.
For LaTeX
Use Complete Form
For BibTeX
References
- M. G. Mazarakis et al., “Experimental Investigation of Certain Beam Transport Issues in a Pulsed Transmission Line Linear Accelerator”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper FRQ0004, pp. 466-468.
- R. Pardo and G. P. Zinkann, “Long-Term Operating Experience for the ATLAS Superconducting Resonators”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper MOA003, pp. 10-14.
- S. M. Oprondek et al., “Next Generation X-ray Beam Position Monitor System for the Advanced Photon Source MBA Upgrade”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 99-101.
- E. Huttel, I. A. Abid, and S. Kh. Jafar, “The Pulsed Power Supplies of the SESAME Booster and Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3415-3417.
- G. Vecchio et al., “A New Flexible and Interactive Control System for the INFN-LNS Accelerators and Beamlines”, presented at the 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, paper TUPP13, unpublished.
- G. Gaitan et al., “Development of a System for Coating SRF Cavities Using Remote Plasma CVD”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 129.
- K. Saito et al., “Superiority of Electropolishing over Chemical Polishing on High Gradients”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97D02, pp. 795-813.
- A. V. Zlobin et al., “TEST RESULTS OF A NB3SN QUADRUPOLE COIL IMPREGNATED WITH RADIATION-RESISTANT MATRIMID 5292”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPME045, pp. 3612-3614.
- C. E. Adolphsen, P. J. Emma, T. H. Fieguth, and W. L. Spence, “Chromatic Correction in the SLC Bunch Length Compressors”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 503-506.
- L. Garabito Ruiz, N. Evans, A. Hoover, and S. Lund, “Simulation of improved injection kicker waveforms in the SNS accumulator ring”, presented at the 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper MOP02, unpublished.
- Y. A. Svistunov, A. P. Durkin, and A. D. Ovsyannikov, “Beam Dynamics Investigations for 433 MHz RFQ Accelerator”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper TUCCH02, pp. 82-84.
- U. Becker, “CST's Commercial Beam-Physics Codes”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper THM2IS03, pp. 308-308.
- J. T. Seeman and J. C. Sheppard, “Special SLC Linac Developments”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE1-2, pp. 214-219.
- H. Smith, T. Constant, K. Crook, J. Fitch, and T. Taylor, “Radiation and Electrical Safety Systems for PEP”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2800-2803.
- M. G. Mazarakis et al., “'Smile'' a New Version for the RADLAC II Linear Accelerator”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU448, pp. 438-440.
- T. E. Plawski, R. Bachimanchi, C. Hovater, D. J. Seidman, and M. J. Wissmann, “LLRF System for the CEBAF Separator Upgrade”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP133, pp. 1171-1173.
- J. Ferm?®, F. Ripouteau, J. L. Belmont, G. Laborie, and G. Goin, “Grenoble Cycloton Progress Report”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69A18, pp. XX-XX.
- A. V. Bondarenko, Y. H. Han, Y. U. Jeong, B. C. Lee, S. V. Miginsky, and S. H. Park, “The Design of a 1.8 keV Compton X-ray Generator for a SC RF Linac at KAERI”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH057, pp. 169-171.
- J. Plouin, J.-P. Charrier, C. Magne, J. Novo, and L. Maurice, “Experimental Investigations of the Quench Phenomena for the Quench Localization by the Second Sound Wave Method”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP111, pp. 739-742.
- M. G. Mazarakis, G. H. Berry, and E. P. Colton, “XeN - XeN Charge Exchange Experiment Using a Split-Beam and Beam Intersection Technique”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3184-3187.
- N. G. Wilson and D. Precechtel, “Mechanical Design and Fabrication of a 425-MHz H-Buncher”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1851-1854.
- K. Nam and J. Choi, “A Study of a TBA Lattice for the Pohang Light Source”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1399-1402.
- S. Zaremba et al., “Beam Dynamics in Newly Designed Cyclotrons at Ion Beam Applications”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1774-1777.
- G. J. Caporaso et al., “Beam-Target Interaction Experiments For Bremsstrahlung Converters Applications”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUB13, pp. 464-466.
- V. E. Scarpine et al., “First Beam Measurements of the FNAL HINS RFQ”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM076, pp. 359-363.
- Y. Jaski, “Closing Remarks”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, paper THCL01, pp. XX-XX.
- I. V. Rybakov and I. I. Isaev, “Estimation of Multipacting in CDS Structure”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 288-290.
- Z. A. Conway, R. L. Fischer, M. P. Kelly, A. Kolomiets, B. Mustapha, and P. N. Ostroumov, “A Comparison of Superconducting RF Structures Optimized for = 0.285”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP044, pp. 889-891.
- R. Pardo, Y. Kawarasaki, and K. Wasniewski, “A CAMAC-Based Intelligent Subsystem for ATLAS, Example Application: Cryogenic Monitoring and Control”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2017-2020.
- S. Sampayan, G. Caporaso, D. Trimble, and G. Westenskow, “Emission, Plasma Formation, and Brightness of a PZT Ferroelectric Cathode”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPE14, pp. 899-901.
- Y. J. Yuan, Y. N. Rao, B. W. Wei, and J. W. Xia, “Simulation of RF Stacking and Multiple Single-Turn Injection and Multiturn Injection”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper H-11, pp. 479-482.
- M. Mizumoto et al., “A High Intensity Proton Linac Development for the JAERI Neutron Science Project”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU1004, pp. 349-356.
Back to search