Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. H. Lumpkin, D. R. Edstrom, J. Ruan, and J. K. Santucci, “Commissioning of a Dual-sweep Streak Camera with Applications to the ASTA Photoinjector Drive Laser”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP021, pp. 66-70.
[n] J. Schmalzle et al., “Mechanical Design of an Alternate Structure for LARP Nb3Sn Quadrupole Magnets for LHC”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP170, pp. 1142-1144.
[n] G. L. Fursov, V. A. Kushnir, V. P. Romas, A. M. Shenderovich, V. A. Vishnyakov, and V. V. Zakutin, “Studies of Electron Linac Beam Postacceleration in a Chain of Passive Cavity Structures”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-52, pp. 573-575.
[n] Y. Jongen, “Conceptual Design for a High Intensity (5 mA) Industrial Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J40, pp. 465-468.
[n] D. M?ñder et al., “Construction of the MYRRHA Injector”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2221-2223. doi:10.18429/JACoW-IPAC2017-TUPVA062
[n] B. P. Xiao and S. U. De Silva, “Heavily Damped Crab Cavities for High Luminosity Collisions”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 986-989. doi:10.18429/JACoW-SRF2023-FRIBA03
[n] F. Gougnaud et al., “The Implementation of the Spiral2 Injector Control System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMU025, pp. 491-493.
[n] G. F. Popov, V. T. Lazurik, V. M. Lazurik, and Y. V. Rogov, “RT-office for Electron Beam, X-ray, and Gamma-ray Dosimetry”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF061, pp. 2403-2405.
[n] Y. Kim, K. Floettmann, T. Limberg, M. Dohlus, and D. Son, “New Linac Layout for TESLA XFEL Project”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP20012C, pp. XX-XX.
[n] A. Zografos et al., “Engineering Prototype for a Compact Medical Dielectric Wall Accelerator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS087, pp. 3636-3638.
[n] D. J. Adams, A. I. Borden, A. H. Kershaw, C. M. Warsop, and D. M. Wright, “Development of the ISIS Synchrotron Diagnostics”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP24C, pp. 1629-1631.
[n] K. A. Marsh et al., “Laser Wakefield Acceleration Beyond 1 GeV using Ionization Induced Injection”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUOBN1, pp. 707-711.
[n] M. Vadrucci et al., “Accelerator Machines and Experimental Activities in the ENEA Frascati Particle Accelerators and Medical Application Laboratory”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 460-463. doi:10.18429/JACoW-IPAC2018-MOPML028
[n] C. Piccinni et al., “HL-LHC series collimators: key technical requirements, crucial production challenges and risk mitigation plan”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1188-1191. doi:10.18429/JACoW-IPAC2024-TUPC75
[n] S. A. Gourlay et al., “Fabrication and Test Results of a High Field, Nb3Sn Superconducting Racetrack Dipole Magnet”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOAB009, pp. 208-210.
[n] H. Ishimoto, M. E. Price, and R. Yamada, “Prototype Test of Energy Doubler/Saver Bending Magnet”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1309-1312.
[n] R. B. Fiorito et al., “Validation of a Novel Emittance Diagnostic Method for Beams with Significant Space Charge”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 451-454. doi:10.18429/JACoW-IPAC2017-MOPAB137
[n] V. E. Scarpine et al., “First Beam Measurements of the FNAL HINS RFQ”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM076, pp. 359-363.
[n] A. H. Lumpkin, “Imaging Techniques for Transverse Beam-Profile/Size Monitors”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper TUBP02, pp. 119-124.
[n] E. Salehi and M. Katoh, “Lattice Design for a Future Plan of UVSOR Synchrotron”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3970-3972. doi:10.18429/JACoW-IPAC2021-THPAB089
For LaTeX
Use Complete Form
For BibTeX
References
- A. H. Lumpkin, D. R. Edstrom, J. Ruan, and J. K. Santucci, “Commissioning of a Dual-sweep Streak Camera with Applications to the ASTA Photoinjector Drive Laser”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP021, pp. 66-70.
- J. Schmalzle et al., “Mechanical Design of an Alternate Structure for LARP Nb3Sn Quadrupole Magnets for LHC”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP170, pp. 1142-1144.
- G. L. Fursov, V. A. Kushnir, V. P. Romas, A. M. Shenderovich, V. A. Vishnyakov, and V. V. Zakutin, “Studies of Electron Linac Beam Postacceleration in a Chain of Passive Cavity Structures”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-52, pp. 573-575.
- Y. Jongen, “Conceptual Design for a High Intensity (5 mA) Industrial Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J40, pp. 465-468.
- D. M?ñder et al., “Construction of the MYRRHA Injector”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2221-2223.
- B. P. Xiao and S. U. De Silva, “Heavily Damped Crab Cavities for High Luminosity Collisions”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper FRIBA03, pp. 986-989.
- F. Gougnaud et al., “The Implementation of the Spiral2 Injector Control System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMU025, pp. 491-493.
- G. F. Popov, V. T. Lazurik, V. M. Lazurik, and Y. V. Rogov, “RT-office for Electron Beam, X-ray, and Gamma-ray Dosimetry”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF061, pp. 2403-2405.
- Y. Kim, K. Floettmann, T. Limberg, M. Dohlus, and D. Son, “New Linac Layout for TESLA XFEL Project”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP20012C, pp. XX-XX.
- A. Zografos et al., “Engineering Prototype for a Compact Medical Dielectric Wall Accelerator”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS087, pp. 3636-3638.
- D. J. Adams, A. I. Borden, A. H. Kershaw, C. M. Warsop, and D. M. Wright, “Development of the ISIS Synchrotron Diagnostics”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP24C, pp. 1629-1631.
- K. A. Marsh et al., “Laser Wakefield Acceleration Beyond 1 GeV using Ionization Induced Injection”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUOBN1, pp. 707-711.
- M. Vadrucci et al., “Accelerator Machines and Experimental Activities in the ENEA Frascati Particle Accelerators and Medical Application Laboratory”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 460-463.
- C. Piccinni et al., “HL-LHC series collimators: key technical requirements, crucial production challenges and risk mitigation plan”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC75, pp. 1188-1191.
- S. A. Gourlay et al., “Fabrication and Test Results of a High Field, Nb3Sn Superconducting Racetrack Dipole Magnet”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOAB009, pp. 208-210.
- H. Ishimoto, M. E. Price, and R. Yamada, “Prototype Test of Energy Doubler/Saver Bending Magnet”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1309-1312.
- R. B. Fiorito et al., “Validation of a Novel Emittance Diagnostic Method for Beams with Significant Space Charge”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 451-454.
- V. E. Scarpine et al., “First Beam Measurements of the FNAL HINS RFQ”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM076, pp. 359-363.
- A. H. Lumpkin, “Imaging Techniques for Transverse Beam-Profile/Size Monitors”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper TUBP02, pp. 119-124.
- E. Salehi and M. Katoh, “Lattice Design for a Future Plan of UVSOR Synchrotron”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3970-3972.
Back to search