JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	A. Defendini, R. Jones, J. P. Matheys, P. Vande Vyvre, and A. Vascotto, “The State Manager: A Tool to Control Large Data-Acquisition Systems”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 524-527. doi:10.18429/JACoW-ICALEPCS1991-S14OOP06
[n]	S. Benitez Berrocal et al., “Development and Testing of a Cherenkov Beam Loss Monitor in CLEAR Facility”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2640-2643. doi:10.18429/JACoW-IPAC2021-WEPAB021
[n]	M. S. Champion, M. P. Kelly, A. M. Rowe, J. P. Ozelis, and C. M. Ginsburg, “Superconducting RF Cavity Production Processing and Testing at Fermilab”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper THP026, pp. 815-817. 
[n]	P. Madela, G. Abeillé, Y.-M. Abiven, X. Elattaoui, J. Pham, and F. Potier, “Conan for Building C++ Tango Devices at SOLEIL”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1227-1230. doi:10.18429/JACoW-ICALEPCS2023-THMBCMO15
[n]	J. Rodnizki and Z. Horvitz, “RF and Heat Flow Simulations of the SARAF RFQ 1.5 MeV/nucleon Proton/Deuteron Accelerator”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TUP045, pp. 506-508. 
[n]	A. Alb?á, A. Adelmann, and A. Fallahi, “OPAL for Self-Consistent Start-to-End Simulation of Undulator-Based Facilities”, presented at the NAPAC'22, Albuquerque, NM, USA, Aug. 2022, paper WEXD4, unpublished. 
[n]	C. Joly, J.-L. Biarrotte, and F. B. Bouly, “Low Level Radio-frequency Developments toward a Fault-tolerant Linac Scheme for an Accelerator Driven System”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP082, pp. 244-246. 
[n]	D. A. Swenson and C. A. Willis, “High-Power Lithium Target for Accelerator-Based BNCT”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper MOP063, pp. 223-225. 
[n]	G. Busatto, C. Abbate, F. Bedeschi, F. Iannuzzo, C. E. Pagliarone, and G. M. Piacentino, “Comparison among Eligible Topologies for Marx Klystron Modulators”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD079, pp. 3284-3286. 
[n]	R. L. Cassel and J. E. Van Ness, “Direct Powering of the 200 - Ge V Synchrotron Magnets from the Utility System”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 672-677. 
[n]	B. M. Sabirov, “Recent Optimized Design of ILC Cryomodule With Explosion Welding Technology”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 141-143. doi:10.18429/JACoW-RUPAC2016-THCDMH02
[n]	N. Solyak et al., “Performance of the First LCLS-II Cryomodules: Issues and Solutions”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 34-37. doi:10.18429/JACoW-IPAC2018-MOZGBD3
[n]	Y. E. Tan, T. D. Cornall, S. A. Griffiths, S. Murphy, and E. Vettoor, “FPGA Based Fast Orbit Feedback System for the Australian Synchrotron”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA37, pp. 437-440. 
[n]	R. J. Barlow, G. Yu. Kourevlev, and A. Mercer, “Simulation of Wake Field Effects on High Energy Particle Beams”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPP028, pp. 2018-2020. 
[n]	Yu. N. Denisov, “The JINR Phasotron: Status and Progress”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J48, pp. 494-495. 
[n]	S. J. Bean et al., “A New Traveling Interferometric Scheme for the APS Upgrade of the 2-ID Bionanoprobe”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 345. doi:10.18429/JACoW-MEDSI2020-THOA02
[n]	H. Kotaki et al., “Research for an Advanced Accelerator at JAERI-APRC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP99915, pp. XX-XX. 
[n]	N. Gelfand et al., “US-LHC IR Magnet Error Analysis and Compensation”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP11C, pp. 380-384. 
[n]	Yu. Shvyd, “X-ray Monochromators for Self-seeding XFELs in the Photon Energy Range Starting from 1.5 keV”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP092, pp. 269-271. 
[n]	T. Katsouleas, T. C. Chiou, W. B. Mori, J. S. Wurtele, and G. Shvets, “Studies of Intense Laser Propagation in Channels for Extended Length Plasma Accelerators”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAB08, pp. 773-775. 
[n]	B. W. Allardyce, “A New Isotope Separator at the CERN Synchro-Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper N-04, pp. 752-755. 
[n]	A. Olmos et al., “Commissioning of the ALBA Fast Orbit Feedback System”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPD23, pp. 691-695. 
[n]	T. Chanwattana et al., “Upgrades of beam diagnostics for linac of Siam Photon Source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1046-1049. doi:10.18429/JACoW-IPAC2023-MOPM028
[n]	P. Arcioni, K. Ko, and R. P. Pendleton, “Numerical Evaluation of Beam Coupling Impedances in Heavily Damped Accelerating Cavities”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 907-910. 
[n]	D. Einfeld, S. Hermle, E. Huettel, R. Rossmanith, and R. Walther, “The Injection Scheme for the ANKA Storage Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP17F, pp. 2135-2136. 
[n]	Yu. N. Denisov, “Cyclotrons of the JINR Laboratory of Nuclear Problems (Invited paper)”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper A-07, pp. 62-67. 
[n]	Yu. N. Denisov and V. N. Anosov, “Automatic Parameter Measuring Systems and Control Systems for Cyclotrons”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper FP-10, pp. 617-620. 
[n]	D. Mihalcea et al., “Field-Emission Electron Source Embedded in a Field-Enhanced Conduction-Cooled Superconducting RF Cavity”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 192-195. doi:10.18429/JACoW-NAPAC2019-MOPLH10
[n]	V. Roger, S. K. Chandrasekaran, and D. Passarelli, “Design Strategy of the PIP-II Cryomodules”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 307-310. doi:10.18429/JACoW-SRF2019-MOP094
[n]	B. Baklakov et al., “Ground Motion Measurements for Fermilab Future Collider Projects”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA133, pp. 1387-1389. 
[n]	D. M. Haider et al., “Versatile Beamline Cryostat for the Cryogenic Current Comparator (CCC) for FAIR”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 78-81. doi:10.18429/JACoW-IBIC2019-MOPP007
[n]	M. Quispe, J. Campmany, A. A. Gevorgyan, and J. Marcos, “Design of an Integrated Crotch Absorber for ALBA Synchrotron Light Source”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 258-260. doi:10.18429/JACoW-MEDSI2018-WEPH24
[n]	S. Cunningham, R. Clarken, and A. C. Starritt, “A Compact Weather Station for Monitoring Environmental Effects on Beam Properties and Equipment”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 30-32. doi:10.18429/JACoW-IBIC2015-MOPB002
[n]	T. J. Peterson et al., “LCLS-II 1.3 GHz Cryomodule Design ÔÇô Modified TESLA-Style Cryomodule for CW Operation”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB119, pp. 1417-1421. 
[n]	S. Hashimoto, K. Kobayashi, Y. Miyahara, S. Sasaki, T. Shimada, and M. Takao, “Design Study of Quasi-Periodic Undulator”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP056G, pp. 2546-2548. 
[n]	D. Bibet, A. Dael, and M. Ohayon, “The GANIL Magnet”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper A-15, pp. 1940-1943. 
[n]	B. Rawat, N. Kumar, S. Chandran, B. Rienäcker, and C. Welsch, “Design studies of a retarding potential energy analyser (RPEA) for low-energy antimatter experiments”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 163-167. doi:10.18429/JACoW-IBIC2025-MOPMO02
[n]	Y. Nosochkov et al., “Design of ILC Extraction Line for 20 mrad Crossing Angle”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPP030, pp. 2134-2136. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search