Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F. Pilat et al., “RHIC Sextant Test: Accelerator Systems and Performance”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P005, pp. 98-100.
[n] Vascotto A., Bulfone D., Giacuzzo F., Grulja S., Lonza M., “The Upgraded ELETTRA Access Control System”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper TC1P47, pp. XX-XX.
[n] J. S. Berg et al., “Recent Progress in Six-Dimensional Ionization Cooling Techniques for Muon-Based Machines”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI102, pp. 1121-1123.
[n] S. C. Leemann and H. Tarawneh, “Impact of Insertion Devices on the MAX IV Storage Rings”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1696-1698. doi:10.18429/JACoW-IPAC2015-TUPJE038
[n] D. Quartullo, S. C. P. Albright, and H. Damerau, “Frequency-Dependent RF Voltage Calibration Using Longitudinal Tomography in the CERN PSB”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 845-848. doi:10.18429/JACoW-IPAC2022-TUPOST006
[n] J. W. Kim, T. Kubo, T. Kawaguchi, Y. Imai, T. Minato, and K. Seo, “A Superconducting Solenoid for Heavy Ion Beam Focusing”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P014, pp. 3425-3427.
[n] F. S. He, R. A. Rimmer, and H. Wang, “A New Cavity Design for Medium Beta Acceleration”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP013, pp. 920-922.
[n] A. Bogdanov, R. Maier, and Y. Senichev, “Delta-T Procedure for Superconducting Linear Accelerator”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT044, pp. 1249-1251.
[n] O. Xiao, Y. L. Chi, N. Gan, X. P. Li, and Z. D. Zhang, “Solid State Amplifiers for Beam Test System of PAPS at IHEP”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1342-1343. doi:10.18429/JACoW-IPAC2022-TUPOTK054
[n] E. Lessner and M. White, “Concepts for a Slow-Positron Target at the Advanced Photon Source”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7W002, pp. 327-329.
[n] K. Shinto et al., “Direct Fast Beam Chopping of H- Ion Beam in the Surface-Plasma H- Ion Source”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPC07, pp. 1007-1009.
[n] A. Ogata, T. Ieiri, Y. Mizumachi, and K. Nakajima, “Refinement Procedures of Beam Positiion Measurement in the TRISTAN Accumulation Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1947-1950.
[n] Voevodin V., Komarov V., Milichenko Yu., Perriollat F., “New Integrated Control System of IHEP Accelerators Complex”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper TC1P51, pp. XX-XX.
[n] P. J. Niedermayer, B. Breitkreutz, C. B?Âhme, V. Kamerdzhiev, and A. Lehrach, “Development of a Fast Betatron Tune and Chromaticity Measurement System for COSY”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 983-985. doi:10.18429/JACoW-IPAC2021-MOPAB319
[n] P. Cohilis and Y. Jongen, “High Beam Intensities for Cyclotron-Based Radioisotope Production”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP075G, pp. 2671-2673.
[n] P.-E. Bernaudin et al., “Design of the Low-beta, Quarter-wave Resonator and its Cryomodule for the SPIRAL 2 Project”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT054, pp. 1276-1278.
[n] M. Pieck, C. Hatch, H. Watkins, and E. Westbrook, “LANSCE accelerator instrumentation and control technology choices”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 251-254. doi:10.18429/JACoW-LINAC2024-MOPB093
[n] N. Biancacci et al., “Linac3, LEIR and PS Performance with Ions in 2021 and Prospects for 2022”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1983-1986. doi:10.18429/JACoW-IPAC2022-WEPOPT055
[n] S. Igarashi et al., “Octupole Magnets for the Instability Damping at the J-PARC Main Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR052, pp. 3045-3047.
[n] Furukawa K., Chiba J., Kamikubota N., Nakagawa H., “Network Based EPICS Drivers for PLC's and Measurement Stations”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper TC1P41, pp. XX-XX.
[n] E. T. Tulu, U. van Rienen, and A. Arnold, “3D MULTIPACTING STUDY FOR THE ROSSENDORF SRF GUN”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP040, pp. 991-994.
[n] R. U. Valente et al., “Design Study of the Nb?Sn Cos-Theta Dipole Model for FCC-hh”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2421-2424. doi:10.18429/JACoW-IPAC2021-TUPAB386
[n] H. Ao et al., “RF Tuning and Fabrication Status of the First Module for J-PARC ACS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT041, pp. 2684-2686.
[n] I. Pinayev, “Instantaneous" Lifetime Measurement in Storage Ring with Top-Up Injection"”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 125-126. doi:10.18429/JACoW-IBIC2023-MOP044
[n] D. J. Holder, F. E. Hannon, S. Khodyachykh, B. D. Muratori, and A. Oppelt, “A Phase Space Tomography Diagnostic for Pitz”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH039, pp. 1091-1093.
[n] H. Przybilski et al., “ESS installation progresses”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2736-2738. doi:10.18429/JACoW-IPAC2024-WEPS19
[n] F. Scheck, “Applications of Cyclotrons in Particle Physics (Invited paper)”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper G-02, pp. 488-495.
[n] G. Andonian et al., “Recent Results from and Future Plans for the VISA II SASE FEL”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPT031, pp. 2167-2169.
[n] M. A. Chaudhri, J. C. Clark, and C. J. Parnell, “A Heavy Water Target for Fast Neutron Production by Cyclotrons”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper GC-03, pp. 679-681.
[n] G. Parzen, “Strong Intrabeam Scattering in Heavy Ion and Proton Beams”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2326-2329.
[n] M. Martinello et al., “Advancement in the Understanding of the Field and Frequency Dependent Microwave Surface Resistance of Niobium”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 364-367. doi:10.18429/JACoW-SRF2017-TUYAA02
[n] T. Glasmacher, “The Facility for Rare Isotope Beams Project: Motivation, Status, and Technical Challenges”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper MOOHC1, unpublished.
[n] P. Corredoura, R. Claus, L. Sapozhnikov, H. Schwarz, R. Tighe, and C. Ziomek, “Low Level RF System Design for the PEP-II B Factory”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ05, pp. 2672-2674.
[n] S. Jin et al., “EP System Development at IHEP”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 586-588. doi:10.18429/JACoW-SRF2017-TUPB084
For LaTeX
Use Complete Form
For BibTeX
References
- F. Pilat et al., “RHIC Sextant Test: Accelerator Systems and Performance”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P005, pp. 98-100.
- Vascotto A., Bulfone D., Giacuzzo F., Grulja S., Lonza M., “The Upgraded ELETTRA Access Control System”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper TC1P47, pp. XX-XX.
- J. S. Berg et al., “Recent Progress in Six-Dimensional Ionization Cooling Techniques for Muon-Based Machines”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI102, pp. 1121-1123.
- S. C. Leemann and H. Tarawneh, “Impact of Insertion Devices on the MAX IV Storage Rings”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1696-1698.
- D. Quartullo, S. C. P. Albright, and H. Damerau, “Frequency-Dependent RF Voltage Calibration Using Longitudinal Tomography in the CERN PSB”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 845-848.
- J. W. Kim, T. Kubo, T. Kawaguchi, Y. Imai, T. Minato, and K. Seo, “A Superconducting Solenoid for Heavy Ion Beam Focusing”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P014, pp. 3425-3427.
- F. S. He, R. A. Rimmer, and H. Wang, “A New Cavity Design for Medium Beta Acceleration”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THP013, pp. 920-922.
- A. Bogdanov, R. Maier, and Y. Senichev, “Delta-T Procedure for Superconducting Linear Accelerator”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT044, pp. 1249-1251.
- O. Xiao, Y. L. Chi, N. Gan, X. P. Li, and Z. D. Zhang, “Solid State Amplifiers for Beam Test System of PAPS at IHEP”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1342-1343.
- E. Lessner and M. White, “Concepts for a Slow-Positron Target at the Advanced Photon Source”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7W002, pp. 327-329.
- K. Shinto et al., “Direct Fast Beam Chopping of H- Ion Beam in the Surface-Plasma H- Ion Source”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPC07, pp. 1007-1009.
- A. Ogata, T. Ieiri, Y. Mizumachi, and K. Nakajima, “Refinement Procedures of Beam Positiion Measurement in the TRISTAN Accumulation Ring”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1947-1950.
- Voevodin V., Komarov V., Milichenko Yu., Perriollat F., “New Integrated Control System of IHEP Accelerators Complex”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper TC1P51, pp. XX-XX.
- P. J. Niedermayer, B. Breitkreutz, C. B?Âhme, V. Kamerdzhiev, and A. Lehrach, “Development of a Fast Betatron Tune and Chromaticity Measurement System for COSY”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 983-985.
- P. Cohilis and Y. Jongen, “High Beam Intensities for Cyclotron-Based Radioisotope Production”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP075G, pp. 2671-2673.
- P.-E. Bernaudin et al., “Design of the Low-beta, Quarter-wave Resonator and its Cryomodule for the SPIRAL 2 Project”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT054, pp. 1276-1278.
- M. Pieck, C. Hatch, H. Watkins, and E. Westbrook, “LANSCE accelerator instrumentation and control technology choices”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 251-254.
- N. Biancacci et al., “Linac3, LEIR and PS Performance with Ions in 2021 and Prospects for 2022”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1983-1986.
- S. Igarashi et al., “Octupole Magnets for the Instability Damping at the J-PARC Main Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR052, pp. 3045-3047.
- Furukawa K., Chiba J., Kamikubota N., Nakagawa H., “Network Based EPICS Drivers for PLC's and Measurement Stations”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper TC1P41, pp. XX-XX.
- E. T. Tulu, U. van Rienen, and A. Arnold, “3D MULTIPACTING STUDY FOR THE ROSSENDORF SRF GUN”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THP040, pp. 991-994.
- R. U. Valente et al., “Design Study of the Nb?Sn Cos-Theta Dipole Model for FCC-hh”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2421-2424.
- H. Ao et al., “RF Tuning and Fabrication Status of the First Module for J-PARC ACS”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT041, pp. 2684-2686.
- I. Pinayev, “Instantaneous" Lifetime Measurement in Storage Ring with Top-Up Injection"”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MOP044, pp. 125-126.
- D. J. Holder, F. E. Hannon, S. Khodyachykh, B. D. Muratori, and A. Oppelt, “A Phase Space Tomography Diagnostic for Pitz”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH039, pp. 1091-1093.
- H. Przybilski et al., “ESS installation progresses”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS19, pp. 2736-2738.
- F. Scheck, “Applications of Cyclotrons in Particle Physics (Invited paper)”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper G-02, pp. 488-495.
- G. Andonian et al., “Recent Results from and Future Plans for the VISA II SASE FEL”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPT031, pp. 2167-2169.
- M. A. Chaudhri, J. C. Clark, and C. J. Parnell, “A Heavy Water Target for Fast Neutron Production by Cyclotrons”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper GC-03, pp. 679-681.
- G. Parzen, “Strong Intrabeam Scattering in Heavy Ion and Proton Beams”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2326-2329.
- M. Martinello et al., “Advancement in the Understanding of the Field and Frequency Dependent Microwave Surface Resistance of Niobium”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 364-367.
- T. Glasmacher, “The Facility for Rare Isotope Beams Project: Motivation, Status, and Technical Challenges”, presented at the North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, paper MOOHC1, unpublished.
- P. Corredoura, R. Claus, L. Sapozhnikov, H. Schwarz, R. Tighe, and C. Ziomek, “Low Level RF System Design for the PEP-II B Factory”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPQ05, pp. 2672-2674.
- S. Jin et al., “EP System Development at IHEP”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 586-588.
Back to search