Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Simrock et al., “Diagnostic Use Case Examples for ITER Plant Instrumentation and Control”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC014, pp. 85-88.
[n] M. Hierholzer, M. Killenberg, T. Kozak, N. Shehzad, G. Varghese, and M. Viti, “Software Tests and Simulations for Control Applications Based on Virtual Time”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 10-12. doi:10.18429/JACoW-PCAPAC2016-WECSPLCO03
[n] H. Fujimori et al., “Online Analyzer System for the Development of the Long-lived Charge-Stripping Foil at the J-PARC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB058, pp. 1653-1655.
[n] T. Ota et al., “Measurement of an L-Band Three-Cell Superconducting Cavity Fabricated in TOSHIBA”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D004, pp. 80-82.
[n] N. R. Stevenson, “Construction and Operation of Cyclotrons for Medical Isotopes”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEZ04T, pp. 249-251.
[n] T. Koseki et al., “Designs and Measurements of Prototype Magnets for the High-Brilliance Synchrotron Light Source at the University of Tokyo”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH303, pp. 3609-3611.
[n] L. Froehlich, P. K. Bartkiewicz, and M. Walla, “Magnet Server and Control System Database Infrastructure for the European XFEL”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 701-704. doi:10.18429/JACoW-ICALEPCS2015-WEPGF006
[n] J. Malka et al., “Data Management Infrastructure for European XFEL”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 952-957. doi:10.18429/JACoW-ICALEPCS2023-WE1BCO02
[n] S. C. Joshi, V. Paramonov, A. Skassyrskaya, N. Hayashizaki, M. Ikegami, and Y. Yamazaki, “The Complete 3-D Coupled RF-Thermal-Structural -RF Analysis Procedure for A Normal Conducting Accelerating Structure for High Intensity Hadron Linac”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO475, pp. 216-218.
[n] T. Hakulinen, F. Havart, P. Ninin, and F. Valentini, “Building an Interlock: Comparison of Technologies for Constructing Safety Interlocks”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 389-392. doi:10.18429/JACoW-ICALEPCS2015-MOPGF132
[n] F. L. Gao et al., “Introduction of the Laser Intensity Measurement System for the FELiChEM”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4936-4938. doi:10.18429/JACoW-IPAC2018-THPML115
[n] F. Sohn, W. Ehsan, G. Giovanetti, D. Goeries, I. Karpics, and K. Sukharnikov, “Automatic Configuration of Motors at the European XFEL”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1358-1361. doi:10.18429/JACoW-ICALEPCS2023-THPDP024
[n] W. A. Gillespie et al., “High Quality Electron Beams Generated in a Laser Wakefield Accelerator”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP113, pp. 307-309.
[n] S. Yamada et al., “HIMAC and Medical Accelerator Projects in Japan”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 7C001, pp. 885-889.
[n] K. Saito and M. Wake, “A New Material Evaluation Method on Niobium by Magnetization Measurement”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F05, pp. 553-557.
[n] R. Valdiviez, L. Earley, R. P. LaFave, F. Martinez, D. Nguyen, and A. Rendon, “The High-Heat Flux Testing of an Interceptive Device for an Intense Proton Beam”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH044, pp. 1321-1323.
[n] A. F. Tummillo, R. A. Andrews, E. R. Detting, and J. McCarthy, “The Microprocessor-Based Control Facility of the He Refrigerator System used in the 1000 GeV Fermilab Switchyard”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3316-3319.
[n] J.-G. Marmouget, A. Binet, Ph. Guimbal, and J.-L. Coacolo, “Present Performance of the Low-emittance, High-bunch Charge ELSA Photo-injected Linac”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI067, pp. 1795-1797.
[n] H. Pines and F. Selph, “Automatic Tuning of the LBL Bevalac Transfer Line”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2165-2168.
[n] A. Compant LaFontaine, J. L. Lemaire, C. Quine, and J. Segr?®, “Numerical Simulations and Experimental Aspects of Space Charge Compensation in a High Energy Electron Beam”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP2A01, pp. 1309-1311.
[n] F. Valentini, T. Hakulinen, L. Hammouti, T. Ladzinski, and P. Ninin, “Formal Methodology for Safety-Critical Systems Engineering at CERN”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCA04, pp. 918-921.
[n] Y. Sun et al., “APS LINAC Interleaving Operation”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1161-1163. doi:10.18429/JACoW-IPAC2019-MOPTS119
[n] J. X. Zhang, T. A. Antaya, and R. E. Block, “Beam Dynamics of a Compact SC Isochronous Cyclotron - Preliminary Study of Central Region”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS021, pp. 643-645.
[n] P. Letellier et al., “Commissioning of the 200 MeV Injector Linac for the Oxford Instr.-IBM Synchrotron Light Source”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1082-1085.
[n] J.-B. Bergot et al., “A Modular Design for the 56 Variants of the Short Straight Section in the Arcs of the Large Hadron Collider LHC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2A05, pp. 2157-2159.
[n] O. E. Shishanin, “SYNCHROTRON RADIATION PROPERTIES DEPENDING ON VARIOUS POINTS OF BENDING MAGNET”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THLP14, pp. XX-XX.
[n] R. Avery et al., “The Bevalac Beam Transport System”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1529-1533.
[n] A. Labrador and F. Perez, “Diagnostic System for the LLS. Beam Position Monitors”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP40C, pp. 1547-1549.
[n] H. G. Blosser, D. A. Johnson, and F. Marti, “Numerical Study of Efficiency of Multi-Turn Extraction in the K1200 Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper G-02, pp. 454-457.
[n] F. Zimmermann et al., “Designs for a Linac-Ring LHeC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB039, pp. 1611-1613.
[n] A. Piwinski, “Observation of Beam-Beam Effects in PETRA”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4268-4271.
[n] L. Leduc, G. Corti, and R. Veness, “Design of a Highly Optimised Vacuum Chamber Support for the LHCb Experiment”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS025, pp. 1581-1583.
[n] N. Kinoshita et al., “Quantitative Determination of 146Sm/147Sm Ratios by Accelerator Mass Spectrometry with an ECR Ion Source and Linear Acceleration for 146Sm Half-Life Measurement”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper TUPP01, pp. 43-45.
[n] T. Katsouleas, J. Yoshii, W. B. Mori, C. Joshi, and C. Clayton, “A Beam Size Monitor Based on Appearance Intensities for Multiple Gas Ionization”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPB18, pp. 2569-2571.
[n] M. C. Chou, W. K. Lau, and A. P. Lee, “Operation of the Drive Laser System for the 2998 MHz NSRRC Photoinjector”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA059, pp. 2250-2252.
[n] R. J. Macek, D. H. Fitzgerald, R. L. Hutson, M. A. Plum, and H. A. Thiessen, “Analysis of Beam Losses at PSR”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1252-1255.
[n] Y. Chung, “Theoretical Studies on the Beam Position Measurement with Button-Type Pickups in APS”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1121-1124.
[n] T. A. Antaya and P. S. Miller, “Extended Lifetime and Other Beneficial Properties of Hafnium Cathodes in Heavy Ion PIG Sources”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper I05, pp. 341-344.
[n] P. J. Niedermayer, B. Breitkreutz, C. B?Âhme, V. Kamerdzhiev, and A. Lehrach, “Development of a Fast Betatron Tune and Chromaticity Measurement System for COSY”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 983-985. doi:10.18429/JACoW-IPAC2021-MOPAB319
[n] H. C. Huang and J. Kay, “Vibration Measurement at Diamond and the Storage Ring Response”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS027, pp. 3338-3340.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Simrock et al., “Diagnostic Use Case Examples for ITER Plant Instrumentation and Control”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC014, pp. 85-88.
- M. Hierholzer, M. Killenberg, T. Kozak, N. Shehzad, G. Varghese, and M. Viti, “Software Tests and Simulations for Control Applications Based on Virtual Time”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 10-12.
- H. Fujimori et al., “Online Analyzer System for the Development of the Long-lived Charge-Stripping Foil at the J-PARC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB058, pp. 1653-1655.
- T. Ota et al., “Measurement of an L-Band Three-Cell Superconducting Cavity Fabricated in TOSHIBA”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D004, pp. 80-82.
- N. R. Stevenson, “Construction and Operation of Cyclotrons for Medical Isotopes”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEZ04T, pp. 249-251.
- T. Koseki et al., “Designs and Measurements of Prototype Magnets for the High-Brilliance Synchrotron Light Source at the University of Tokyo”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH303, pp. 3609-3611.
- L. Froehlich, P. K. Bartkiewicz, and M. Walla, “Magnet Server and Control System Database Infrastructure for the European XFEL”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 701-704.
- J. Malka et al., “Data Management Infrastructure for European XFEL”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper WE1BCO02, pp. 952-957.
- S. C. Joshi, V. Paramonov, A. Skassyrskaya, N. Hayashizaki, M. Ikegami, and Y. Yamazaki, “The Complete 3-D Coupled RF-Thermal-Structural -RF Analysis Procedure for A Normal Conducting Accelerating Structure for High Intensity Hadron Linac”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO475, pp. 216-218.
- T. Hakulinen, F. Havart, P. Ninin, and F. Valentini, “Building an Interlock: Comparison of Technologies for Constructing Safety Interlocks”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 389-392.
- F. L. Gao et al., “Introduction of the Laser Intensity Measurement System for the FELiChEM”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4936-4938.
- F. Sohn, W. Ehsan, G. Giovanetti, D. Goeries, I. Karpics, and K. Sukharnikov, “Automatic Configuration of Motors at the European XFEL”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP024, pp. 1358-1361.
- W. A. Gillespie et al., “High Quality Electron Beams Generated in a Laser Wakefield Accelerator”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP113, pp. 307-309.
- S. Yamada et al., “HIMAC and Medical Accelerator Projects in Japan”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 7C001, pp. 885-889.
- K. Saito and M. Wake, “A New Material Evaluation Method on Niobium by Magnetization Measurement”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95F05, pp. 553-557.
- R. Valdiviez, L. Earley, R. P. LaFave, F. Martinez, D. Nguyen, and A. Rendon, “The High-Heat Flux Testing of an Interceptive Device for an Intense Proton Beam”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH044, pp. 1321-1323.
- A. F. Tummillo, R. A. Andrews, E. R. Detting, and J. McCarthy, “The Microprocessor-Based Control Facility of the He Refrigerator System used in the 1000 GeV Fermilab Switchyard”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3316-3319.
- J.-G. Marmouget, A. Binet, Ph. Guimbal, and J.-L. Coacolo, “Present Performance of the Low-emittance, High-bunch Charge ELSA Photo-injected Linac”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI067, pp. 1795-1797.
- H. Pines and F. Selph, “Automatic Tuning of the LBL Bevalac Transfer Line”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2165-2168.
- A. Compant LaFontaine, J. L. Lemaire, C. Quine, and J. Segr?®, “Numerical Simulations and Experimental Aspects of Space Charge Compensation in a High Energy Electron Beam”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP2A01, pp. 1309-1311.
- F. Valentini, T. Hakulinen, L. Hammouti, T. Ladzinski, and P. Ninin, “Formal Methodology for Safety-Critical Systems Engineering at CERN”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUCOCA04, pp. 918-921.
- Y. Sun et al., “APS LINAC Interleaving Operation”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1161-1163.
- J. X. Zhang, T. A. Antaya, and R. E. Block, “Beam Dynamics of a Compact SC Isochronous Cyclotron - Preliminary Study of Central Region”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS021, pp. 643-645.
- P. Letellier et al., “Commissioning of the 200 MeV Injector Linac for the Oxford Instr.-IBM Synchrotron Light Source”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1082-1085.
- J.-B. Bergot et al., “A Modular Design for the 56 Variants of the Short Straight Section in the Arcs of the Large Hadron Collider LHC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2A05, pp. 2157-2159.
- O. E. Shishanin, “SYNCHROTRON RADIATION PROPERTIES DEPENDING ON VARIOUS POINTS OF BENDING MAGNET”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THLP14, pp. XX-XX.
- R. Avery et al., “The Bevalac Beam Transport System”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1529-1533.
- A. Labrador and F. Perez, “Diagnostic System for the LLS. Beam Position Monitors”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP40C, pp. 1547-1549.
- H. G. Blosser, D. A. Johnson, and F. Marti, “Numerical Study of Efficiency of Multi-Turn Extraction in the K1200 Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper G-02, pp. 454-457.
- F. Zimmermann et al., “Designs for a Linac-Ring LHeC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB039, pp. 1611-1613.
- A. Piwinski, “Observation of Beam-Beam Effects in PETRA”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4268-4271.
- L. Leduc, G. Corti, and R. Veness, “Design of a Highly Optimised Vacuum Chamber Support for the LHCb Experiment”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS025, pp. 1581-1583.
- N. Kinoshita et al., “Quantitative Determination of 146Sm/147Sm Ratios by Accelerator Mass Spectrometry with an ECR Ion Source and Linear Acceleration for 146Sm Half-Life Measurement”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper TUPP01, pp. 43-45.
- T. Katsouleas, J. Yoshii, W. B. Mori, C. Joshi, and C. Clayton, “A Beam Size Monitor Based on Appearance Intensities for Multiple Gas Ionization”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPB18, pp. 2569-2571.
- M. C. Chou, W. K. Lau, and A. P. Lee, “Operation of the Drive Laser System for the 2998 MHz NSRRC Photoinjector”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA059, pp. 2250-2252.
- R. J. Macek, D. H. Fitzgerald, R. L. Hutson, M. A. Plum, and H. A. Thiessen, “Analysis of Beam Losses at PSR”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1252-1255.
- Y. Chung, “Theoretical Studies on the Beam Position Measurement with Button-Type Pickups in APS”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1121-1124.
- T. A. Antaya and P. S. Miller, “Extended Lifetime and Other Beneficial Properties of Hafnium Cathodes in Heavy Ion PIG Sources”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper I05, pp. 341-344.
- P. J. Niedermayer, B. Breitkreutz, C. B?Âhme, V. Kamerdzhiev, and A. Lehrach, “Development of a Fast Betatron Tune and Chromaticity Measurement System for COSY”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 983-985.
- H. C. Huang and J. Kay, “Vibration Measurement at Diamond and the Storage Ring Response”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS027, pp. 3338-3340.
Back to search