Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. Kako et al., “Pulsed Operation of the 972 MHz Prototype Cryomodule for ADS Superconducting Linac”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP39, pp. 551-553.
[n] B. Tang, Q. S. Chen, T. Hu, J. Jiang, and Y. Q. Xiong, “Main Control System of the Linear Accelerator for the HUST THz-FEL”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1858-1860. doi:10.18429/JACoW-IPAC2017-TUPIK070
[n] A. Akiyama, T. Katoh, Ta. Kubo, S. Kurokawa, T. Nakamura, and M. Yoshida, “Magnet Power Supply System for KEK-B Accelerator”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP21G, pp. 2085-2090.
[n] M. H. Moscatello, C. Berthe, C. Jamet, and G. Normand, “Machine Protection System for the SPIRAL2 Facility”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD044, pp. 2612-2614.
[n] N. Lecesne et al., “SHyPIE: A New Source for On Line Production of Multicharged Radioactive Condensable Ion Beams”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper D-08, pp. 362-365.
[n] B. Rusnak et al., “High Intensity Proton Linac Activities at Los Alamos”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A01, pp. 1-11.
[n] N. Orr et al., “On Line Isotopic Separator Test Benches at GANIL”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1792-1795.
[n] H. S. Kang et al., “Beam Acceleration Results of Test Linac”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D028, pp. 743-745.
[n] A. Rezaeizadeh, R. Smith, and T. Schilcher, “RF Pulse Flattening in the SwissFEL Test Facility based on Model-free Iterative Learning Control”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP044, pp. 824-827.
[n] S. Park, W. J. Corbett, R. O. Hettel, J. F. Schmerge, J. J. Sebek, and J. W. Wang, “SPEAR3 Booster RF System Upgrade: Performance Requirements and Evaluation of Resources”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD077, pp. 1578-1580.
[n] J. Smedley et al., “Sputter Growth of Alkali Antimonide Photocathodes: An in Operando Materials Analysis”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1965-1967. doi:10.18429/JACoW-IPAC2015-TUPHA003
[n] D. Calandroni and Y. Hiramoto, “A Simple Beam Chopper for TOF Experiments”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-24, pp. 317-319.
[n] H. S. Kang, E. H. Lee, and J. Choi, “A GUI for Slow Orbit Feedback Using MATLAB”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP555, pp. XX-XX.
[n] G. Rakowsky, J. Aspenleiter, R. Carr, R. Ruland, and S. Lidia, “Measurement and Optimization of the VISA Undulator”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA35, pp. 2698-2700.
[n] M. Boege et al., “SLS Lattice Finalization and Magnet Girder Design”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP29G, pp. 644-646.
[n] S. C. Joshi et al., “Development of Superconducting Cavities and Related Infrastructure for High Intensity Proton Linac for Spallation Neutron Source”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP122, pp. 1140-1143.
For LaTeX
Use Complete Form
For BibTeX
References
- E. Kako et al., “Pulsed Operation of the 972 MHz Prototype Cryomodule for ADS Superconducting Linac”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP39, pp. 551-553.
- B. Tang, Q. S. Chen, T. Hu, J. Jiang, and Y. Q. Xiong, “Main Control System of the Linear Accelerator for the HUST THz-FEL”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1858-1860.
- A. Akiyama, T. Katoh, Ta. Kubo, S. Kurokawa, T. Nakamura, and M. Yoshida, “Magnet Power Supply System for KEK-B Accelerator”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP21G, pp. 2085-2090.
- M. H. Moscatello, C. Berthe, C. Jamet, and G. Normand, “Machine Protection System for the SPIRAL2 Facility”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD044, pp. 2612-2614.
- N. Lecesne et al., “SHyPIE: A New Source for On Line Production of Multicharged Radioactive Condensable Ion Beams”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper D-08, pp. 362-365.
- B. Rusnak et al., “High Intensity Proton Linac Activities at Los Alamos”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97A01, pp. 1-11.
- N. Orr et al., “On Line Isotopic Separator Test Benches at GANIL”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1792-1795.
- H. S. Kang et al., “Beam Acceleration Results of Test Linac”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D028, pp. 743-745.
- A. Rezaeizadeh, R. Smith, and T. Schilcher, “RF Pulse Flattening in the SwissFEL Test Facility based on Model-free Iterative Learning Control”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP044, pp. 824-827.
- S. Park, W. J. Corbett, R. O. Hettel, J. F. Schmerge, J. J. Sebek, and J. W. Wang, “SPEAR3 Booster RF System Upgrade: Performance Requirements and Evaluation of Resources”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD077, pp. 1578-1580.
- J. Smedley et al., “Sputter Growth of Alkali Antimonide Photocathodes: An in Operando Materials Analysis”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1965-1967.
- D. Calandroni and Y. Hiramoto, “A Simple Beam Chopper for TOF Experiments”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-24, pp. 317-319.
- H. S. Kang, E. H. Lee, and J. Choi, “A GUI for Slow Orbit Feedback Using MATLAB”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP555, pp. XX-XX.
- G. Rakowsky, J. Aspenleiter, R. Carr, R. Ruland, and S. Lidia, “Measurement and Optimization of the VISA Undulator”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA35, pp. 2698-2700.
- M. Boege et al., “SLS Lattice Finalization and Magnet Girder Design”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP29G, pp. 644-646.
- S. C. Joshi et al., “Development of Superconducting Cavities and Related Infrastructure for High Intensity Proton Linac for Spallation Neutron Source”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP122, pp. 1140-1143.
Back to search