Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] N. Hubert, M. El Ajjouri, and D. P?®deau, “Test of New Beam Loss Monitors for SOLEIL”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 215-218. doi:10.18429/JACoW-IBIC2018-TUPA03
[n] C. A. Swoboda, R. E. Daniels, and A. W. Maschke, “Oscilloscope Waveform Digitizer”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 369-371.
[n] F. Zimmermann et al., “A Final Focus System for the Next Linear Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPC06, pp. 707-709.
[n] R. Broucquart, M. El Ajjouri, N. Hubert, S. M. Minolli, S. Poirier, and D. P?®deau, “CIEL: Current Injection Efficiency and Lifetime”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper WEPP02, unpublished.
[n] L. Kang et al., “Introduction About Key Techniques of Critical Equipment in CSNS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4548-4550. doi:10.18429/JACoW-IPAC2017-THPVA049
[n] P. G. O, L. D. Hansborough, and T. J. Zaugg, “Compact Emittance Scanners for MeV Particle Beams”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1553-1556.
[n] M. Crane et al., “Network Upgrade for the SLC: PEP-II Network”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P049, pp. 2473-2475.
[n] F. Le Pimpec, F. King, R. E. Kirby, and M. T. F. Pivi, “Secondary Electron Yield Measurements from Thin Surface Coatings for NLC Electron Cloud Reduction”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF080, pp. 1789-1791.
[n] Y. Yamazaki, K. Takata, and S. Tokumoto, “Damping Test of the Higher-Order Modes of the Re-Entrant Accelerating Cavity”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2915-2918.
[n] T. Oulevey et al., “An Update on the CERN Journey from Bare Metal to Orchestrated Containerization for Controls”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1138-1144. doi:10.18429/JACoW-ICALEPCS2023-TH2AO03
[n] V. Baldini et al., “ESPRESSO Instrument Control Electronics and Software: Final Phases Before the Installation in Chile”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 891-894. doi:10.18429/JACoW-ICALEPCS2017-TUPHA195
[n] Y. Hao, V. Litvinenko, and V. Ptitsyn, “Feedback Scheme for Kink Instability in ERL Based Electron Ion Collider”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUOAN4, pp. 699-701.
[n] G. H. Trilling, “Invited Paper- Impact of Storage Rings on Elementary Particle Physics”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4252-4258.
[n] X. J. Wang et al., “Experimental Results of the ATF In-line Injection System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPE11, pp. 890-892.
[n] M. Watanabe et al., “A Broad-Band RF Cavity Using Finemet Cut Cores as a Buncher of Ion Beams”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16026, pp. XX-XX.
[n] R. Hou et al., “Field Measurements of PEP-II LER Dipoles and Quadrupoles at IHEP”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P020, pp. 3297-3299.
[n] B. Autin, G. Carron, F. Caspers, S. Milner, L. Thorndahl, and S. van der Meer, “ACOL Stochastic Cooling Systems”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1549-1552.
[n] D. Van Winkle, J. D. Fox, and A. Young, “11.424 GHz Stripline Transversal Filter for Sub-Picosecond Bunch Timing Measurements”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM080, pp. 367-371.
[n] V. Popov et al., “Power Supply System for a Compact 1.2 GeV Booster Synchrotron”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS038, pp. 521-523.
[n] Y. Yin, “A DC Current Transformer for TRIUMF”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper IXD-09, pp. 498-500.
[n] A. Zsákai, G. Pokol, and G. Anda, “Novel gas jet-based measurement method for beam profile and emittance analysis on the HUN-REN EK-CER microwave proton ion source”, presented at the IBIC'25, Liverpool, UK, Sep. 2025, paper TUPMO02, unpublished.
[n] J. Seeman et al., “Achieving a Luminosity of 1034/cm2/s in the PEP-II B-factory”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS045, pp. 643-645.
[n] G. P. Lawrence, “Transmutation and Energy Production with High Power Accelerators”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FPD03, pp. 35-39.
[n] K. E. Robins, W. B. Sampson, and M. G. Thomas, “Superconducting Magnet Quench Protection for ISABELLE”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1318-1320.
[n] J. P. Gourber, H. G. Hereward, and S. Myers, “Overlap Knock-Out Effects in the Cern Intersecting Storage Rings (ISR)”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1405-1408.
[n] V. A. Shkaruba et al., “Status of Development of Superconducting Insertion Devices for Generation of Synchrotron Radiation at Budker INP”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 94-99. doi:10.18429/JACoW-RUPAC2018-THXMH01
[n] Yu. G. Alenitsky, “Isochronous Cyclotrons for Thermonuclear Reactors Driving”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP08B, pp. 2395-2397.
[n] Y. Kondo et al., “Baseline Design of a Proton Linac for BNCT at OIST”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 906-909. doi:10.18429/JACoW-IPAC2016-MOPOY026
[n] R. L. Poirier and T. Enegren, “Status of RF Development Work on a Ferrite Tuned Amplifier Cavity for the TRIUMF Kaon Factory”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1499-1502.
[n] B. Visentin, M. F. Barthe, P. Desgardin, and V. Moineau, “Positron Annihilation Spectroscopy on Niobium Samples”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO047, pp. 326-330.
[n] W. Hain, F. Hornstra, A. Lazos, G. Miat, G. Samulat, and K. Wittenburg, “Beam Profile Monitors for the HERA Proton Accelerators”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 759-762.
[n] F. Lin et al., “Investigation of Residual Vertical Intrinsic Resonances with Dual Partial Siberian Snakes in the AGS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS011, pp. 3534-3536.
[n] A. H. Lumpkin, Y. L. Li, S. J. Pasky, and N. Sereno, “Observations on COTR Due to the Microbunching Instability in Compressed Beams”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC47, pp. 352-355.
[n] K. E. Deitrick et al., “A Hard X-Ray Compact Compton Source at CBETA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1604-1605. doi:10.18429/JACoW-IPAC2019-TUPGW085
[n] J. R. Purcell, “Invited Paper: Superconducting Magnet Frontiers”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper D01, pp. 211-214.
[n] R. Cirami et al., “An OPC-UA Based Architecture for the Control of the ESPRESSO Spectrograph @ VLT”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOMIB07, pp. 70-73.
[n] M. Omet et al., “Operation Experiences with the MICROTCA.4-based LLRF Control System at FLASH”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 844-846. doi:10.18429/JACoW-IPAC2015-MOPHA029
[n] W. L. Chen, Y. He, H. Jia, Y. Tao, Z. J. Wang, and Q. Wu, “Conceptual Design of LEBT for C-ADS Linac Accelerator”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEPB16, pp. 228-230.
[n] K. L. F. Bane and P. B. Wilson, “Bunch Lengthening due to Potential Well Distortion from Cylindrical Cavities with Beam Ports”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1485-1487.
[n] H. Braun, J. Clendenin, S. Ecklund, A. Kulikov, and R. Pitthan, “A Possible Design of the NLC e Source”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 530-533.
[n] E. Acerbi, G. Bellomo, M. Castiglioni, E. Fabrici, and F. Resmini, “Beam Extraction Studies for the Proposed Superconducting Cyclotron at the University of Milan”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1115-1118.
[n] J. J. Pon, K. S. Lee, M. Mouat, T. Planche, and P. J. Yogendran, “Stabilizing the Beam Current Split Ratio in TRIUMF's 500 MeV Cyclotron with High Level, Closed-Loop Feedback Software”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC136, pp. 1370-1372.
[n] R. H. Iverson, F.-J. Decker, D. Schultz, C. Spencer, J. Turner, and U. Wienands, “LER Injection Line B2/B4 Study”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA75, pp. 1252-1254.
[n] Z. B. du Toit et al., “Progress with the NAC Injector Cyclotron for Heavy and Polarized Ions”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper VIII-15, pp. 361-364.
For LaTeX
Use Complete Form
For BibTeX
References
- N. Hubert, M. El Ajjouri, and D. P?®deau, “Test of New Beam Loss Monitors for SOLEIL”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 215-218.
- C. A. Swoboda, R. E. Daniels, and A. W. Maschke, “Oscilloscope Waveform Digitizer”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 369-371.
- F. Zimmermann et al., “A Final Focus System for the Next Linear Collider”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPC06, pp. 707-709.
- R. Broucquart, M. El Ajjouri, N. Hubert, S. M. Minolli, S. Poirier, and D. P?®deau, “CIEL: Current Injection Efficiency and Lifetime”, presented at the 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, paper WEPP02, unpublished.
- L. Kang et al., “Introduction About Key Techniques of Critical Equipment in CSNS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4548-4550.
- P. G. O, L. D. Hansborough, and T. J. Zaugg, “Compact Emittance Scanners for MeV Particle Beams”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1553-1556.
- M. Crane et al., “Network Upgrade for the SLC: PEP-II Network”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3P049, pp. 2473-2475.
- F. Le Pimpec, F. King, R. E. Kirby, and M. T. F. Pivi, “Secondary Electron Yield Measurements from Thin Surface Coatings for NLC Electron Cloud Reduction”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF080, pp. 1789-1791.
- Y. Yamazaki, K. Takata, and S. Tokumoto, “Damping Test of the Higher-Order Modes of the Re-Entrant Accelerating Cavity”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2915-2918.
- T. Oulevey et al., “An Update on the CERN Journey from Bare Metal to Orchestrated Containerization for Controls”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TH2AO03, pp. 1138-1144.
- V. Baldini et al., “ESPRESSO Instrument Control Electronics and Software: Final Phases Before the Installation in Chile”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 891-894.
- Y. Hao, V. Litvinenko, and V. Ptitsyn, “Feedback Scheme for Kink Instability in ERL Based Electron Ion Collider”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUOAN4, pp. 699-701.
- G. H. Trilling, “Invited Paper- Impact of Storage Rings on Elementary Particle Physics”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4252-4258.
- X. J. Wang et al., “Experimental Results of the ATF In-line Injection System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPE11, pp. 890-892.
- M. Watanabe et al., “A Broad-Band RF Cavity Using Finemet Cut Cores as a Buncher of Ion Beams”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16026, pp. XX-XX.
- R. Hou et al., “Field Measurements of PEP-II LER Dipoles and Quadrupoles at IHEP”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P020, pp. 3297-3299.
- B. Autin, G. Carron, F. Caspers, S. Milner, L. Thorndahl, and S. van der Meer, “ACOL Stochastic Cooling Systems”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1549-1552.
- D. Van Winkle, J. D. Fox, and A. Young, “11.424 GHz Stripline Transversal Filter for Sub-Picosecond Bunch Timing Measurements”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM080, pp. 367-371.
- V. Popov et al., “Power Supply System for a Compact 1.2 GeV Booster Synchrotron”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS038, pp. 521-523.
- Y. Yin, “A DC Current Transformer for TRIUMF”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper IXD-09, pp. 498-500.
- A. Zsákai, G. Pokol, and G. Anda, “Novel gas jet-based measurement method for beam profile and emittance analysis on the HUN-REN EK-CER microwave proton ion source”, presented at the 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, paper TUPMO02, unpublished.
- J. Seeman et al., “Achieving a Luminosity of 1034/cm2/s in the PEP-II B-factory”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS045, pp. 643-645.
- G. P. Lawrence, “Transmutation and Energy Production with High Power Accelerators”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FPD03, pp. 35-39.
- K. E. Robins, W. B. Sampson, and M. G. Thomas, “Superconducting Magnet Quench Protection for ISABELLE”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1318-1320.
- J. P. Gourber, H. G. Hereward, and S. Myers, “Overlap Knock-Out Effects in the Cern Intersecting Storage Rings (ISR)”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1405-1408.
- V. A. Shkaruba et al., “Status of Development of Superconducting Insertion Devices for Generation of Synchrotron Radiation at Budker INP”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 94-99.
- Yu. G. Alenitsky, “Isochronous Cyclotrons for Thermonuclear Reactors Driving”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP08B, pp. 2395-2397.
- Y. Kondo et al., “Baseline Design of a Proton Linac for BNCT at OIST”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 906-909.
- R. L. Poirier and T. Enegren, “Status of RF Development Work on a Ferrite Tuned Amplifier Cavity for the TRIUMF Kaon Factory”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1499-1502.
- B. Visentin, M. F. Barthe, P. Desgardin, and V. Moineau, “Positron Annihilation Spectroscopy on Niobium Samples”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO047, pp. 326-330.
- W. Hain, F. Hornstra, A. Lazos, G. Miat, G. Samulat, and K. Wittenburg, “Beam Profile Monitors for the HERA Proton Accelerators”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 759-762.
- F. Lin et al., “Investigation of Residual Vertical Intrinsic Resonances with Dual Partial Siberian Snakes in the AGS”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS011, pp. 3534-3536.
- A. H. Lumpkin, Y. L. Li, S. J. Pasky, and N. Sereno, “Observations on COTR Due to the Microbunching Instability in Compressed Beams”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC47, pp. 352-355.
- K. E. Deitrick et al., “A Hard X-Ray Compact Compton Source at CBETA”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1604-1605.
- J. R. Purcell, “Invited Paper: Superconducting Magnet Frontiers”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper D01, pp. 211-214.
- R. Cirami et al., “An OPC-UA Based Architecture for the Control of the ESPRESSO Spectrograph @ VLT”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOMIB07, pp. 70-73.
- M. Omet et al., “Operation Experiences with the MICROTCA.4-based LLRF Control System at FLASH”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 844-846.
- W. L. Chen, Y. He, H. Jia, Y. Tao, Z. J. Wang, and Q. Wu, “Conceptual Design of LEBT for C-ADS Linac Accelerator”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper WEPB16, pp. 228-230.
- K. L. F. Bane and P. B. Wilson, “Bunch Lengthening due to Potential Well Distortion from Cylindrical Cavities with Beam Ports”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1485-1487.
- H. Braun, J. Clendenin, S. Ecklund, A. Kulikov, and R. Pitthan, “A Possible Design of the NLC e Source”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 530-533.
- E. Acerbi, G. Bellomo, M. Castiglioni, E. Fabrici, and F. Resmini, “Beam Extraction Studies for the Proposed Superconducting Cyclotron at the University of Milan”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1115-1118.
- J. J. Pon, K. S. Lee, M. Mouat, T. Planche, and P. J. Yogendran, “Stabilizing the Beam Current Split Ratio in TRIUMF's 500 MeV Cyclotron with High Level, Closed-Loop Feedback Software”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC136, pp. 1370-1372.
- R. H. Iverson, F.-J. Decker, D. Schultz, C. Spencer, J. Turner, and U. Wienands, “LER Injection Line B2/B4 Study”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA75, pp. 1252-1254.
- Z. B. du Toit et al., “Progress with the NAC Injector Cyclotron for Heavy and Polarized Ions”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper VIII-15, pp. 361-364.
Back to search