JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	S. A. Kahn et al., “Focusing Horn System for the BNL Very Long Baseline Neutrino Oscillation Experiment”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG036, pp. 3255-3257. 
[n]	L. G. Yan et al., “Magnetic Measurement of the Undulator U38 for THz-FEL”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 156-158. doi:10.18429/JACoW-SAP2017-TUPH21
[n]	M. Watanabe et al., “Design of UVSOR Light Source at IMS”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3175-3178. 
[n]	R. Stassen, R. Eichhorn, F. M. Esser, B. Laatsch, G. Schug, and H. Singer, “The HW Resonators in J??lich”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper MOP03, pp. 113-117. 
[n]	H. D. Glass et al., “Stability Tests of Permanent Magnets Built with Strontium Ferrite”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P013, pp. 3260-3262. 
[n]	R. A. Yogi et al., “Uppsala High Power Test Stand for ESS Spoke Cavities”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB108, pp. 711-713. 
[n]	S. LIU et al., “operational experiences and upgrade of CSNS ion source”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP4658, unpublished. 
[n]	P. C. Vander Arend and W. B. Fowler, “Superconducting Accelerator Magnet Cooling Systems”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 119-122. 
[n]	I. Pinayev and A. Blednykh, “Evaluation of Heat Dissipation in the BPM Buttons”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP014, pp. 3471-3472. 
[n]	T. Bergmark et al., “Operations with Internal Targets and Electron Cooling at CELSIUS”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 465-468. 
[n]	G. Devanz et al., “Experimental Characterization of a 700 MHz =0.47 5 Cell Superconducting Cavity Prototype for Pulsed Proton Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP126, pp. 853-855. 
[n]	H. D. Glass et al., “Permanent Dipole Magnets for the 8 GeV Transfer Line at FNAL”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P012, pp. 3257-3259. 
[n]	M. Dominiczak, F. Bouly, N. Gandolfo, and C. Joly, “Modeling of Superconducting Spoke Cavity with its Control Loops Systems for the MYRRHA Linac Project”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 387-391. doi:10.18429/JACoW-SRF2019-TUP002
[n]	T. Bergmark et al., “Machine studies related to Internal Hydrogen Pellet Target and to Electron Cooling/Heating at CELSIUS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP1B11, pp. 575-577. 
[n]	H. Bach, K. I. Blomqvist, J. Chavanne, P. Elleaume, M. N. Pedersen, and M. Vignat, “Insertion Devices Produced at DANFYSIK A/S”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP04F, pp. 2207-2209. 
[n]	E. Boltezar et al., “Experimental RFQ as Injector to the CERN Linac I”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper H15, pp. 302-305. 
[n]	J. Dumas et al., “SARAF beam commissioning results: injector, MEBT”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1703-1705. doi:10.18429/JACoW-IPAC2023-TUPA172
[n]	C. F. Crowley et al., “LBNF 1.2 MW Target: Conceptual Design & Fabrication”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3315-3317. doi:10.18429/JACoW-IPAC2015-WEPTY023
[n]	P. Bernard, J. Huguenin, U. Tallgren, and M. Weiss, “Proposal for a Higher Energy Preinjector for the CERN PS”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper J-3, pp. 1027-1053. 
[n]	E. Boltezar et al., “Performance of the CERN RFQ (RFQ1 Project)”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper MOB0005, pp. 56-58. 
[n]	A. N. Chechenin, R. Maier, Y. Senichev, and E. Senicheva, “The High Order Non-linear Beam Dynamics in High Energy Storage Ring of FAIR”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH072, pp. 2083-2085. 
[n]	M. P. Reiser, “A Collective Accelerator as Ion Source and Injector for a Heavy-Ion Cyclotron”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper G-04, pp. 2427-2431. 
[n]	L. Pr?ªstegaard et al., “Status of the Canadian Light Source Booster Synchrotron”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI095, pp. 611-613. 
[n]	P. Hurh, M. Gormley, J. S. Hangst, J. Howell, and S. O, “A Radiation-hardened Pulsed Magnet for the Tevatron-I Target Station”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2360-2363. 
[n]	N. Yu. Kazarinov et al., “Design and Simulation of the Axial Injection Beam Line of DC140 Cyclotron of FLNR JINR”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1852-1854. doi:10.18429/JACoW-IPAC2021-TUPAB191
[n]	M. Cavenago et al., “Planar Electron Sources and the Electron Trap ELTRAP”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT100, pp. 2083-2085. 
[n]	G. Martinet et al., “Results of beta=0.12 quarter wave resonator for radioactive beams production at SPIRAL2 Facility”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP40, pp. XX-XX. 
[n]	H. D. Glass et al., “Permanent Gradient Magnets for the 8 GeV Transfer Line at FNAL”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P014, pp. 3263-3265. 
[n]	C. Madec et al., “The Challenge to Assemble 100 Cryomodules for the European E-XFEL”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THIOA02, pp. 816-820. 
[n]	M. N. Rajcevic, J. J. Comor, and A. Dobrosavljevic, “Design of a Channel for Irradiation of Solid Targets”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper A-34, pp. 137-140. 
[n]	J. S. Berg et al., “Recent Progress in Six-Dimensional Ionization Cooling Techniques for Muon-Based Machines”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI102, pp. 1121-1123. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search