JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	D. Gu, Q. Gu, D. Huang, M. Zhang, and M. H. Zhao, “Study of Beam-Based Alignment for Shanghai Soft X-Ray FEL Facility”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB018, pp. 513-515. 
[n]	L. Vega Cid, M. J. Barnes, V. Vlachodimitropoulos, W. J. M. Weterings, and A. Ab?â, “Thermal Analysis of the LHC Injection Kicker Magnets”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3479-3482. doi:10.18429/JACoW-IPAC2017-WEPVA096
[n]	C. Boscolo Meneguolo et al., “Study of Beam-Gas Interactions at the LHC for the Physics Beyond Colliders Fixed-Target Study”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 673-676. doi:10.18429/JACoW-IPAC2019-MOPRB049
[n]	G. Maero et al., “Simulation of Cooling Mechanisms of Highly-charged Ions in the HITRAP Cooler Trap”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper WEM2C06, pp. 130-133. 
[n]	C. Rimbault et al., “4D Emittance Measurements Using Multiple Wire and Waist Scan Methods in the ATF Extraction Line”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC087, pp. 1257-1259. 
[n]	H. Bluem et al., “High Brightness Electron Guns for Next-Generation Light Sources and Accelerators”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT156, pp. 899-901. 
[n]	C. Charrondi?¿re, P. Bestmann, and T. Feniet, “Remote Control of Heterogeneous Sensors for 3D LHC Collimator Alignment”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC022, pp. 103-106. 
[n]	J. Emery, B. Dehning, J. F. Herranz Alvarez, M. Koujili, and J. L. Sirvent Blasco, “Vacuum Actuator and Controller Design for a Fast Wire Scanner”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper TUPG029, pp. 195-197. 
[n]	D. K. Jiang et al., “The Vacuum System for SSRF Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP144, pp. 3702-3704. 
[n]	D. Huang, D. Gu, and M. Zhang, “Study of Microbunching Instability in SHINE Linac”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 629-631. doi:10.18429/JACoW-FEL2019-THP016
[n]	C. Pagani, “Technical Issues for Large Accelerators based on High Gradient SC Cavities”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEYCH02, pp. 137-141. 
[n]	K. Satou, D. Bodart, S. Levasseur, G. Schneider, J. W. Storey, and M. Sapinski, “A Novel Field Cage Design for the CPS IPM and Systematic Errors in Beam Size and Emittance”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2193-2196. doi:10.18429/JACoW-IPAC2018-WEPAL019
[n]	M. Valette et al., “Effect of Quench Heater and CLIQ Firing on the Circulating HL-LHC Beam”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2101-2104. doi:10.18429/JACoW-IPAC2017-TUPVA023
[n]	K. E. Deitrick, J. R. Delayen, and G. A. Krafft, “High Average Brilliance Compact Inverse Compton Light Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 932-935. doi:10.18429/JACoW-IPAC2017-MOPVA036
[n]	C. M. Bhat and J. Marriner, “Intrabeam Scattering in the Fermilab Antiproton Accumulator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1773-1776. 
[n]	A. R. Lambert et al., “Mechanical Design and Analysis of the Proposed APEX2 VHF CW Electron Gun”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3014-3016. doi:10.18429/JACoW-IPAC2019-WEPRB084
[n]	Y. Arakaki, S. Arai, K. Niki, M. Okada, Y. Takeda, and M. Tomizawa, “A Change of Resonant Frequency of IH-Linac for Radioactive Nuclear Beams”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE006, pp. 864-866. 
[n]	N. A. Moody, D. W. Feldman, K. Jensen, P. G. O, J. L. Shaw, and J. E. Yater, “Experimental Progress Toward Low Workfunction Controlled Porosity Dispenser Photocathodes”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH069, pp. 748-751. 
[n]	D. L. Hall, M. Liepe, and J. T. Maniscalco, “RF Measurements on High Performance Nb3Sn Cavities”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2320-2322. doi:10.18429/JACoW-IPAC2016-WEPMR024
[n]	X. Gao, A. Shi, Z. Yin, and J. Zhong, “A Novel Monostructure Buncher for HIRFL”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F7-07, pp. 401-403. 
[n]	A. Chao, “Estimate of Spin Polarization for the Electrom Storage Rings SPEAR and PEP”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3482-3484. 
[n]	X. Yang, M. Li, W. Li, and X. J. Shu, “The FEL-THz Facility Driven by a Photo-cathode Injector”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUOD03, pp. 452-454. 
[n]	P. N. Ni et al., “Overview of warm-dense-matter experiments with intense heavy ion beams at GSI-Darmstadt”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEOCC02, pp. 2038-2040. 
[n]	Y. Chung et al., “Implementation of the Global and Local Beam Position Feedback Systems for the Advanced Photon Source Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ16, pp. 2702-2704. 
[n]	J. H. Yue, Q. Y. Deng, J. Hu, S. J. Wei, and Q. Ye, “Phase and Energy Measurement System for C-ADS Injector I”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 95-97. doi:10.18429/JACoW-IBIC2015-MOPB026
[n]	M. Tomut and C. L. Hubert, “Understanding Ion Induced Radiation Damage in Target Materials”, in Proc. HB'12, Beijing, China, Sep. 2012, paper WEO3C06, pp. 476-478. 
[n]	R. R. Lindberg and K. Kim, “Power Variations of an X-ray FEL Oscillator in Saturation”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 114-117. doi:10.18429/JACoW-FEL2019-TUP028
[n]	A. L. Healy, G. Burt, D. M. Graham, and S. P. Jamison, “Group Velocity Matching in Dielectric-Lined Waveguides and its Role in Electron-THz Interaction”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3296-3298. doi:10.18429/JACoW-IPAC2017-WEPVA019
[n]	Ch. Leemann et al., “A Heavy Ion Facility for Radiation Therapy”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 986-989. 
[n]	C. Pascual-Izarra et al., “Effortless Creation of Control & Data Acquisition Graphical User Interfaces with Taurus”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1138-1142. doi:10.18429/JACoW-ICALEPCS2015-THHC3O03
[n]	B. F. Milton et al., “Commissioning and First Operation of a 500 muA, 30MeV, H- Cyclotron: The TR30”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 65-68. 
[n]	M. Yoshii et al., “Present Status of J-PARC Ring RF Systems”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROAC005, pp. 475-477. 
[n]	P. Ninin and L. Scibile, “The LHC Access Control System”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT031, pp. 1900-1902. 
[n]	R. Tom?ís et al., “ATF2 Ultra-Low IP Betas Proposal”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP024, pp. 2540-2542. 
[n]	G. Andonian et al., “Design and Status of the VISA II Experiment”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB057, pp. 944-946. 
[n]	S. I. Meigo, A. Akutsu, K. Ikezaki, M. Nishikawa, M. Ooi, and S. F. Fukuta, “Beam Profile Monitor at the 1 MW Spallation Neutron Source”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 611-617. doi:10.18429/JACoW-IBIC2015-WEDLA03
[n]	T. Hattori, A. Kitagawa, M. Muramatsu, and N. Hayashizaki, “Relationship of Performance and RF Resonance Modes”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper WEPP02, pp. 121-124. 
[n]	Y. Shoji, S. Hashimoto, A. Ando, N. Kumagai, H. Ohkuma, and M. Oishi, “Upgrading of a Vacuum System of the NewSUBARU Storage Ring : Design and Effect”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP14007, pp. XX-XX. 
[n]	R. Forster et al., “Electron Cooling Experiments at Fermilab”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2386-2389. 
[n]	C. Zanoni, G. Gobbi, D. Perini, and G. Stancari, “Preliminary Mechanical Design Study of the Hollow Electron Lens for HL-LHC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3547-3550. doi:10.18429/JACoW-IPAC2017-WEPVA117
[n]	C. Baumgarten, “Beam Based Calibration Measurements at the PSI Cyclotron Facility”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 342-344. doi:10.18429/JACoW-Cyclotrons2016-THP16
[n]	C. Tambasco et al., “Landau Damping Studies for the FCC: Octupole Magnets, Electron Lens and Beam-Beam Effects”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3150-3153. doi:10.18429/JACoW-IPAC2018-THPAF074
[n]	U. Amaldi et al., “A Hospital - Based Hadrontherapy Complex”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 49-52. 
[n]	P. Fernandez Carmona et al., “Continuous Beam Scanning Intensity Control of a Medical Proton Accelerator Using a Simulink Generated FPGA Gain Scheduled Controller”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 242-247. doi:10.18429/JACoW-PCaPAC2018-FRCC2
[n]	C. X. Li et al., “Status of the China Material Irradiation Facility RFQ”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 811-813. doi:10.18429/JACoW-LINAC2018-THPO053
[n]	F. Caspers, E. H. R. Gaxiola, T. Kroyer, S. S. Kurennoy, M. Timmins, and J. A. Uythoven, “A Retrofit Technique for Kicker Beam-coupling Impedance Reduction”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT008, pp. 1144-1146. 
[n]	H. Koiso et al., “Beam Operation with Crab Cavities at KEKB”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN045, pp. 1487-1489. 
[n]	S. Braccini, “Compact Medical Cyclotrons and their use for Radioisotope Production and Multi-disciplinary Research”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 229-234. doi:10.18429/JACoW-Cyclotrons2016-TUD01
[n]	Y. Morita et al., “Status of KEKB Superconducting Cavities and Study for Future SKEKB”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO022, pp. 236-238. 
[n]	A. Khan, “Quantum Mechanical Aspects of the Halo Puzzle”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP136, pp. 3280-3281. 
[n]	S. Montesano, “Testing the Double-Crystal Setup for Physics Beyond Colliders Experiments in the UA9-SPS Experiment”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 790-793. doi:10.18429/JACoW-IPAC2018-TUPAF043
[n]	O. S. Kozlov, S. I. Kozlov, and A. A. Smirnov, “APPLICATION OF THE SUPERCONDUCTING TRANSMISSION LINE”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THLP05, pp. XX-XX. 
[n]	G. Vecchio et al., “Management Software and Data Exchange Protocol for the INFN-LNS Accelerators Beamlines”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 846-848. doi:10.18429/JACoW-ICALEPCS2017-TUPHA179
[n]	L. Vos, “Transverse Stability of the High Intensity SPS Proton Beam”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 896-899. 
[n]	Y. H. Yeon et al., “Development Study of Penning Ion Source for Compact 9 MeV Cyclotron”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TUPPT019, pp. 195-197. 
[n]	J. Bradley III, T. Hardek, M. T. Lynch, D. E. Rees, W. Roybal, and P. J. Tallerico, “Spallation Neutron Source High-Power RF Transmitter Design for High Availability, Ease of Installation and Cost Containment”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG015, pp. 1458-1460. 
[n]	L. J. Mao et al., “Electron Cooling Experiments at HIRFL-CSR”, in Proc. SAP'14, Lanzhou, China, Aug. 2014, paper THPMH2, pp. 113-115. 
[n]	R. Kazimi, J. Fugitt, A. Krycuk, C. K. Sinclair, and L. Turlington, “Test of a New RF Separator Structure for CEBAF”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-70, pp. 244-246. 
[n]	W. Bensiek, J. Dateo, J. Hager, H. Padamsee, W. Pruitt, and P. Williams, “Superconducting Performance of CEBAF/Cornell Prototype Cavities Fabricated by Babcock & Wilcox”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1887-1890. 
[n]	Y. S. Kim et al., “Status of the PlS 2 GeBV Storage Ring”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 603-606. 
[n]	G. Franzini et al., “Final Design and Features of the B-train System of CNAO”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB079, pp. 2878-2880. 
[n]	T. Tominaka, S. Fujishima, A. Goto, H. Okuno, and Y. Yano, “An Optimal Design for the Injection and Extraction Elements for the RIKEN Superconducting Ring Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper G-13, pp. 495-498. 
[n]	D. J. Nicklaus et al., “An Erlang-Based Front End Framework for Accelerator Controls”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THDAUST02, pp. 1264-1266. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search