JaCoW Logo

Reference Search

Favourites


For Word

[n]	Y.-N. Rao, R. A. Baartman, and T. Planche, “Improved Simulation for Centre Region of TRIUMF 500 MeV Cyclotron with Space Charge”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3489-3491. doi:10.18429/JACoW-IPAC2018-THPAK109
[n]	P. Kruyt, D. Gamba, and G. Franchetti, “Measurements and simulations of the e-cooling performance in ELENA”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 836-839. doi:10.18429/JACoW-IPAC2024-MOPS51
[n]	M. Kelly et al., “Installation and commissioning of the APS-U bunch lengthening system”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2713-2716. doi:10.18429/JACoW-IPAC2024-WEPS10
[n]	D. Schultz et al., “The Polarized Electron Source of the Stanford Linear Accelerator Center”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH2-02, pp. 676-680. 
[n]	G. Hutter and N. Angert, “Improvement of the 108 MHz RF-Amplifiers for the Unilac Alvarez Structure”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3012-3014. 
[n]	R. Hajima, H. Zen, K. Kawase, and H. Ohgaki, “Carrier-envelope phase stabilization in FEL oscillators”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1874-1876. doi:10.18429/JACoW-IPAC2023-TUPL054
[n]	K. Yokoyama, S. Fukuda, Y. Higashi, T. Higo, N. K. Kudo, and S. Matsumoto, “High-gradient Experiments with Narrow Waveguides”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP106, pp. 2758-2760. 
[n]	Y. Fukao et al., “Construction Status of the COMET Experimental Facility”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1907-1909. doi:10.18429/JACoW-IPAC2021-TUPAB210
[n]	Ph. Amstutz and M. Vogt, “Microbunching Studies for the FLASH2020+ Upgrade Using a Semi-Lagrangian Vlasov Solver”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2334-2337. doi:10.18429/JACoW-IPAC2022-WEPOMS037
[n]	M. N. Butler, F. Jones, S. Koscielniak, and G. H. Mackenzie, “Coulomb Scattering Cross Sections for Accelerator Design”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 654-657. 
[n]	R. Bugoi, V. Cojocaru, B. Constantinescu, and A. Sasianu, “Materials Analysis in Archaeometrical Studies at Bucharest Particle Accelerators”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP6B14, pp. 2574-2576. 
[n]	R. K. Kutschke, J. Steimel, R. C. Webber, and S. A. Wolbers, “Simultaneous Position Measurements of Protons and Anti-Protons in the Tevatron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT018, pp. 1613-1615. 
[n]	D. T. Ziemianski and M. P. Nowak, “Dynamic Analysis and Measurement of Ground Motion for the Solaris - National Synchrotron Radiation Centre in Cracow”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 24-25. doi:10.18429/JACoW-MEDSI2016-MOPE10
[n]	C. D. Barnes et al., “Determination of Longitudinal Phase Space in SLAC Main Accelerator Beams”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAE024, pp. 1856-1858. 
[n]	G. S. Levine and G. W. Bennett, “The Brookhaven AGS Radiation Monitoring Systems”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 734-736. 
[n]	O. Kamigaito et al., “Design of a Charge-State Multiplier System for the RIKEN RI-Beam Factory”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4085, pp. 603-605. 
[n]	R. Johnson, F. Pedersen, G. Shering, and S. van der Meer, “Computer Control of RF-Manipulations in the CERN Antiproton Accumulator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2290-2293. 
[n]	R. Tom?ís, M. Aiba, R. Calaga, A. Morita, G. Vanbavinckhove, and J. Wenninger, “Beta-Beating Corrections in the SPS as a Testbed for the LHC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP022, pp. 2534-2536. 
[n]	D. Neuffer, A. Riddiford, and A. G. Ruggiero, “Searches for Arnold Diffusion" and "Chaotic" Motion in the Beam-Beam Interaction"”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2427-2430. 
[n]	R. Paparella et al., “Operational Experience of the European-XFEL 3.9 GHz Coaxial Tuners”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 240-244. doi:10.18429/JACoW-SRF2017-MOPB077
[n]	M. K. Fujimaki, M. Kase, A. Uchiyama, and M. Komiyama, “Status of Control System for RIKEN RI-Beam Factory”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB11, pp. 187-189. 
[n]	J. Calvey et al., “APS upgrade booster commissioning”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1232-1235. doi:10.18429/JACoW-IPAC2024-TUPG07
[n]	M. Virgo et al., “Controls and Alignment for the University of Maryland Electron Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH169, pp. 1177-1179. 
[n]	T. Yamada, H. Ogawa, Y. Sato, and K. Suzuki, “Status of the NIRS-Chiba Isochronous Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper B-08, pp. 61-64. 
[n]	B. D. Hartsell, K. Anderson, J. Hylen, V. I. Sidorov, and S. Tariq, “LBNF Hadron Absorber: Mechanical Design and Analysis for 2.4MW Operation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3318-3320. doi:10.18429/JACoW-IPAC2015-WEPTY025
[n]	H. Brueck, B. Holzer, C. Luettge, and B. Pawlowski, “Correction of the Influence of Persistent Currents in the HERA Proton Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP042G, pp. 392-394. 
[n]	D. Li, M. R. Asakawa, and K. Imasaki, “Analysis on the Gain of a Compact Cherenkov Free-Electron Laser”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC70, pp. 398-401. 
[n]	A. Goswami, V. S. Pandit, and P. Sing Babu, “Design Optimization of the Spiral Inflector for a High Current Compact Cyclotron”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP038, pp. 129-131. 
[n]	H. Li, A. K. Bhattacharyya, L. Hermansson, M. Jobs, J. M. Y. Ruber, and R. Santiago Kern, “High Power Testing of the First ESS SPOKE Cavity Package”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 817-820. doi:10.18429/JACoW-SRF2017-THPB035
[n]	Y. Batygin, E. Guardincerri, D. Tupa, and S. Wender, “High-energy beamline for delivering H- laser stripped proton beam to LANSCE experimental area”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2216-2218. doi:10.18429/JACoW-IPAC2023-TUPM012
[n]	S. Choroba, J. Hameister, and M. Kuhn, “Performance of the Klystron Modulators at the S-Band Test Facility at DESY”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4068, pp. 213-215. 
[n]	G. Perez-Segurana et al., “Using ER@CEBAF to Show that a Multipass ERL Can Drive an XFEL”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1555-1558. doi:10.18429/JACoW-IPAC2021-TUPAB079
[n]	P. Nenzi et al., “Stability Analysis of the TOP-IMPLART 35 MeV Proton Beam”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 697-700. doi:10.18429/JACoW-IPAC2018-TUPAF017
[n]	X. Serra-Gallifa et al., “Harmony: A Generic FPGA Based Solution for Flexible Feedback Systems”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 141-144. doi:10.18429/JACoW-PCAPAC2016-FRFMPLCO06
[n]	I. Romera et al., “Design considerations for CERN´s second-generation Beam Interlock System”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4105-4108. doi:10.18429/JACoW-IPAC2023-THPA062
[n]	Y. Ishi, Y. Kuriyama, Y. Mori, M. Sakamoto, and T. Uesugi, “KURRI FFAG's Future Project as ADSR Proton Driver”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 366-370. doi:10.18429/JACoW-Cyclotrons2016-THC01

For LaTeX

Use Complete Form

For BibTeX

References

Back to search