Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Ro?ƒbach, C. Dimopoulou, and M. Steck, “Electron Cooling at GSI and FAIR ÔÇô Status and Latest Activities”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper WEXAUD04, pp. 136-139.
[n] H. Blosser et al., “Medical Accelerator Projects at Michigan State University”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 742-747.
[n] Y. Hayashi et al., “TWT Amplifier using a Ferroelectric Cathode for Electron Beam Generation”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA90, pp. 3606-3608.
[n] O. B. Malyshev et al., “First Results of Magnetic Field Penetration Measurements on Multilayer S-I-S Structures”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2245-2247. doi:10.18429/JACoW-IPAC2016-WEPMB057
[n] J. W. McKenzie, B. L. Militsyn, S. Thorin, and S. Werin, “MAX-IV Linac Injector Simulations including Tolerance and Jitter Analysis”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC131, pp. 3191-3193.
[n] H. M. Miyadera, A. J. Jason, and K. Nagamine, “Design of Muon Accelerators for an Advanced Muon Facility”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS017, pp. 3032-3034.
[n] K. Endo, S. Fukumoto, K. Mishima, S. Ninomiya, and G. Silvestrov, “Table-Top Proton Synchrotron Ring for Medical Applications”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5A09, pp. 2515-2517.
[n] R. Byer, A. Mizrahi, L. Schaechter, and R. H. Siemann, “Dielectric Bragg Accelerator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FOAB009, pp. 728-730.
[n] G. Burt et al., “Design and Operation of a Compact 1 MeV X-band Linac”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB004, pp. 183-185.
[n] S. Maury et al., “Commissioning and First Operation of the Antiproton Decelerator (AD)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROPA008, pp. 580-584.
[n] L. Faillace et al., “High Gradient Normal Conducting Radio-Frequency Photoinjector System for Sincrotrone Trieste”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEODS4, pp. 1504-1506.
[n] S. Seletskiy et al., “Analysis of Possible Beam Losses in the NSLS II BSR Transfer Line”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1959-1961. doi:10.18429/JACoW-IPAC2015-TUPMA056
[n] S. Seletskiy et al., “Analysis of Possible Beam Losses in the NSLS II Storage Ring”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1956-1958. doi:10.18429/JACoW-IPAC2015-TUPMA055
[n] B. J. A. Shepherd et al., “Design and Measurement of a Low-energy Tunable Permanent Magnet Quadrupole Prototype”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1316-1318. doi:10.18429/JACoW-IPAC2014-TUPRO113
[n] I. Bazarov, M. Lakshmanan, and T. Miyajima, “Maximum achievable beam brightness from photoinjectors”, in Proc. ERL'09, Ithaca, NY, USA, Jun. 2009, paper PLT20, pp. XX-XX.
[n] B. J. A. Shepherd, J. A. Clarke, A. Bartalesi, M. Modena, M. Struik, and N. A. Collomb, “Prototype Adjustable Permanent Magnet Quadrupoles For CLIC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME043, pp. 3606-3608.
[n] H. M. Miyadera, A. J. Jason, and S. S. Kurennoy, “Simulation of Large Acceptance Muon Linac”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE076, pp. 3521-3523.
[n] J. W. McKenzie, D. Angal-Kalinin, J. K. Jones, and B. L. Militsyn, “Design of the Production and Measurement of Ultra-Short Electron Bunches from an S-band RF Photoinjector”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD068, pp. 1560-1562.
[n] J. Bahrdt, W. Frentrup, A. Gaupp, M. Scheer, and G. Wuestefeld, “Dynamic Multipole Shimming of the APPLE Undulator UE112”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN013, pp. 941-943.
[n] K. Ha et al., “NSLS-II Active Interlock System and Post-Mortem Architecture”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4214-4216. doi:10.18429/JACoW-IPAC2016-THPOY048
[n] J. A. Clarke et al., “CLARA - A Proposed New FEL Test Facility for the UK”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP066, pp. 1750-1752.
[n] S. S. Kurennoy, A. J. Jason, and W. M. Tuzel, “Aperture Windows in High-Gradient Cavities for Accelerating Low-Energy Muons”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPZ029, pp. 862-864.
[n] T. Goetsch, J. Feikes, M. Ries, and G. Wuestefeld, “A Robinson Wiggler Proposal for the Metrology Light Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2001-2003. doi:10.18429/JACoW-IPAC2014-WEPRO028
[n] P. Frigola et al., “Development of Solid Freeform Fabrication (SFF) for the Production of RF Photoinjectors”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP013, pp. 2015-2017.
[n] T. Plettner, R. L. Byer, and P. P. Lu, “Proposed Few-cycle Laser-particle Accelerator Structure”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS081, pp. 3175-3177.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Ro?ƒbach, C. Dimopoulou, and M. Steck, “Electron Cooling at GSI and FAIR ÔÇô Status and Latest Activities”, in Proc. 10th Workshop on Beam Cooling and Related Topics (COOL'15), Newport News, VA, USA, Sep.-Oct. 2015, paper WEXAUD04, pp. 136-139.
- H. Blosser et al., “Medical Accelerator Projects at Michigan State University”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 742-747.
- Y. Hayashi et al., “TWT Amplifier using a Ferroelectric Cathode for Electron Beam Generation”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA90, pp. 3606-3608.
- O. B. Malyshev et al., “First Results of Magnetic Field Penetration Measurements on Multilayer S-I-S Structures”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2245-2247.
- J. W. McKenzie, B. L. Militsyn, S. Thorin, and S. Werin, “MAX-IV Linac Injector Simulations including Tolerance and Jitter Analysis”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC131, pp. 3191-3193.
- H. M. Miyadera, A. J. Jason, and K. Nagamine, “Design of Muon Accelerators for an Advanced Muon Facility”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS017, pp. 3032-3034.
- K. Endo, S. Fukumoto, K. Mishima, S. Ninomiya, and G. Silvestrov, “Table-Top Proton Synchrotron Ring for Medical Applications”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5A09, pp. 2515-2517.
- R. Byer, A. Mizrahi, L. Schaechter, and R. H. Siemann, “Dielectric Bragg Accelerator”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FOAB009, pp. 728-730.
- G. Burt et al., “Design and Operation of a Compact 1 MeV X-band Linac”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB004, pp. 183-185.
- S. Maury et al., “Commissioning and First Operation of the Antiproton Decelerator (AD)”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROPA008, pp. 580-584.
- L. Faillace et al., “High Gradient Normal Conducting Radio-Frequency Photoinjector System for Sincrotrone Trieste”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEODS4, pp. 1504-1506.
- S. Seletskiy et al., “Analysis of Possible Beam Losses in the NSLS II BSR Transfer Line”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1959-1961.
- S. Seletskiy et al., “Analysis of Possible Beam Losses in the NSLS II Storage Ring”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1956-1958.
- B. J. A. Shepherd et al., “Design and Measurement of a Low-energy Tunable Permanent Magnet Quadrupole Prototype”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1316-1318.
- I. Bazarov, M. Lakshmanan, and T. Miyajima, “Maximum achievable beam brightness from photoinjectors”, in Proc. 45th ICFA Advanced Beam Dynamics Workshop on Energy Recovery LINAC Workshop (ERL'09), Ithaca, NY, USA, Jun. 2009, paper PLT20, pp. XX-XX.
- B. J. A. Shepherd, J. A. Clarke, A. Bartalesi, M. Modena, M. Struik, and N. A. Collomb, “Prototype Adjustable Permanent Magnet Quadrupoles For CLIC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPME043, pp. 3606-3608.
- H. M. Miyadera, A. J. Jason, and S. S. Kurennoy, “Simulation of Large Acceptance Muon Linac”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE076, pp. 3521-3523.
- J. W. McKenzie, D. Angal-Kalinin, J. K. Jones, and B. L. Militsyn, “Design of the Production and Measurement of Ultra-Short Electron Bunches from an S-band RF Photoinjector”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD068, pp. 1560-1562.
- J. Bahrdt, W. Frentrup, A. Gaupp, M. Scheer, and G. Wuestefeld, “Dynamic Multipole Shimming of the APPLE Undulator UE112”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN013, pp. 941-943.
- K. Ha et al., “NSLS-II Active Interlock System and Post-Mortem Architecture”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4214-4216.
- J. A. Clarke et al., “CLARA - A Proposed New FEL Test Facility for the UK”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP066, pp. 1750-1752.
- S. S. Kurennoy, A. J. Jason, and W. M. Tuzel, “Aperture Windows in High-Gradient Cavities for Accelerating Low-Energy Muons”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPZ029, pp. 862-864.
- T. Goetsch, J. Feikes, M. Ries, and G. Wuestefeld, “A Robinson Wiggler Proposal for the Metrology Light Source”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2001-2003.
- P. Frigola et al., “Development of Solid Freeform Fabrication (SFF) for the Production of RF Photoinjectors”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP013, pp. 2015-2017.
- T. Plettner, R. L. Byer, and P. P. Lu, “Proposed Few-cycle Laser-particle Accelerator Structure”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS081, pp. 3175-3177.
Back to search