JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	H. Hassanzadegan, A. Jansson, C. A. Thomas, D. Lipka, M. Werner, and A. Young, “System Overview and Current Status of the ESS Beam Position Monitors”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3653-3655. doi:10.18429/JACoW-IPAC2014-THPME166
[n]	E. Bressi, “Operation and Patient Treatments at CNAO Facility”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THXA02, pp. 3180-3184. 
[n]	A. E. Aksentyev and V. Senichev, “Spin Motion Perturbation Effect on the EDM Statistic in the Frequency Domain Method”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 861-863. doi:10.18429/JACoW-IPAC2019-MOPTS011
[n]	G. S. Dobbing and A. Wolski, “Instability Threshold Calculations for DIAMOND”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP7B03, pp. 1116-1118. 
[n]	D. Proft, F. Frommberger, and W. Hillert, “The Accelerator Control System at ELSA”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA002, pp. 3149-3151. 
[n]	M. Pullia, “Status Report of the CNAO Construction and Commissioning”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS070, pp. 3589-3591. 
[n]	J. Dedic, K. Zagar, A. M. M. Aulin S?Âderqvist, N. H. Claesson, R. Tavcar, and J. Neves Rodrigues, “FPGA Development Approach for Accelerator Systems with High Integration Complexity”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA088, pp. 876-878. 
[n]	M. Lee, “Model-Based Expert Systems for Linac Computer Controls”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE4-05, pp. 470-473. 
[n]	S. Jin, X. Y. Lu, K. Zhao, R. A. Rimmer, and A. T. Wu, “Effects of Cathode Shapes on BEP and EP During Vertical Surface Treatments on Niobium”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO022, pp. 411-417. 
[n]	N. Yu. Kazarinov and F. R. Osswald, “Simulation of Hollow Beam Formation at the Initial Part of RIB Transport Channel of SPIRAL2”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS017, pp. 3457-3459. 
[n]	R. A. Jameson, “Reliability Engineering for Facility Effectiveness”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1030-1036. 
[n]	Yu. P. Vakhrushin et al., “Applications of Linear Electron Accelerators to Industry and Medicine”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1085-1088. 
[n]	R. Appleby, M. D. Salt, L. C. Deacon, and E. Gschwendtner, “Background and Energy Deposition Studies for the CLIC Post-Collision Line”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC028, pp. 1060-1062. 
[n]	S. Sanaye Hajari, S. Doebert, and H. Shaker, “Beam Dynamics Studies of the CLIC Drive Beam Injector”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP034, pp. 131-133. 
[n]	B. Koubek, H. Podlech, A. Schempp, and J. S. Schmidt, “Results of the High Power Test of the 325 MHz 4-Rod RFQ Prototype”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3235-3237. doi:10.18429/JACoW-IPAC2014-THPME012
[n]	K. Ishiwata et al., “Development of Strip-Line Type Beam Position Monitor”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO460, pp. 178-180. 
[n]	J.-H. Jang et al., “Status and Beam Commissioning Plan of PEFP 100 MeV Proton Linac”, in Proc. HB'12, Beijing, China, Sep. 2012, paper THO1C05, pp. 570-574. 
[n]	T. Schiffer, P. Haenisch, W. Hillert, and M. T. Switka, “Set up of a Synchrotron Light Monitor at the 2.5 GeV Booster Synchrotron at ELSA”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3468-3470. doi:10.18429/JACoW-IPAC2014-THPME098
[n]	F. Carra et al., “Mechanical Robustness of HL-LHC Collimator Designs”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1070-1073. doi:10.18429/JACoW-IPAC2019-MOPTS091
[n]	A. Kaminsky et al., “Quasi-optic RF Power Transmission Line from a FEM Oscillator to the Model of the CLIC Accelerating Structure”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF041, pp. 1054-1056. 
[n]	E. De Ley and D. Jacobs, “Rules-based Analysis with JBoss Drools : Adding Intelligence to Automation”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS008, pp. 790-793. 
[n]	D. Proft and W. Hillert, “Implementation of a New Ramp Computation Scheme for the Magnet Power Supplies at ELSA”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4085-4087. doi:10.18429/JACoW-IPAC2016-THPOY001
[n]	D. C. Larbalestier, P. J. Lee, and W. Starch, “Limitation of Critical Current Density by Intermetallic Formation in Fine Filament Nb-Ti Superconductors”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3743-3746. 
[n]	T. Shintake, “C-Band Main Linac RF System for e+e- Linear Collider of 0.5 to 1.0 TeV C.M. Energy”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP50, pp. 184-186. 
[n]	S. J. Brooks, “Vertical Orbit-excursion Fixed Field Alternating Gradient Accelerators (V-FFAGs) and 3D Cyclotrons”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 956-960. doi:10.18429/JACoW-IPAC2014-TUYB01
[n]	Y.-S. Cho et al., “The KOMAC Accelerator Facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEOBB101, pp. 2052-2054. 
[n]	J.-P. Thiry, A. Dieckmann, F. Frommberger, W. Hillert, and J. F. Schmidt, “High Bandwidth Closed Orbit Control for a Fast Ramping Electron Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1111-1113. doi:10.18429/JACoW-IPAC2014-TUPRO040
[n]	A. Schempp, M. Ferch, and H. Klein, “A Light Ion Four Rod RFQ Injector”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 267-270. 
[n]	D. Proft, W. Hillert, and T. Perlitius, “Development of New Microcontroller Based Power Supply Control Units at ELSA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2777-2779. doi:10.18429/JACoW-IPAC2015-WEPMA014
[n]	S. G. Tantawi, “Progress in High Gradient Accelerator Structure Research for Future Linear Colliders”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE3RAI01, pp. 1872-1872. 
[n]	B. Koubek, H. Podlech, A. Schempp, and J. S. Schmidt, “Power Tests of the 325 MHz 4-ROD RFQ Prototype”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO018, pp. 3800-3802. 
[n]	J. Y. Ryu, Y.-S. Cho, J.-H. Jang, H. S. Kim, H.-J. Kwon, and K. T. Seol, “Measurement of the Beam Position Monitor's Electrical Performance and Electronics Sensitivity for 100 MeV Proton Linac and Beam Lines”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME056, pp. 598-600. 
[n]	S. T. Craig, P. J. P. Bunge, and R. J. West, “A 3 kW 35 to 70 MHz Solid-State Amplifier”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1005-1008. 
[n]	P. A. Bong and E. Carrone, “Linac Coherent Light Source Personnel Protection System Architecture”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP107, pp. XX-XX. 
[n]	A. N. Chernykh, E. M. Ivanov, V. S. Khoroshkov, and G. I. Klenov, “Radiation Oncology Ophthalmic Center Based on the C-80 Accelerator at the NRC Kurchatov Institute" - PNPI"”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 145-148. doi:10.18429/JACoW-RUPAC2018-FRCAMH03
[n]	M. I. Grachev and E. V. Ponomareva, “Optical Design of the Proton Beam Lines for the Neutron Research Complex INR RAS and Medical Application”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC021, pp. 2049-2051. 
[n]	J. L. Navarro Quirante et al., “CALIFES: A Multi-Purpose Electron Beam for Accelerator Technology Tests”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP030, pp. 121-123. 
[n]	V. H. Hardion, G. Abeille, A. Buteau, S. Le, N. Leclercq, and S. Pierre-Joseph Zephir, “Assessing Software Quality at Each Step of its Lifecycle to Enhance Reliability of Control Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THBHMUST02, pp. 1205-1208. 
[n]	O. Piquet, M. Desmons, and A. France, “RF Tuning of the IPHI RFQ”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3355-3357. doi:10.18429/JACoW-IPAC2014-THPME055
[n]	P. Haenisch, W. Hillert, and B. Neff, “Water-cooled Thin Walled Beam Pipes of the Fast Ramping Storage Ring ELSA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2780-2782. doi:10.18429/JACoW-IPAC2015-WEPMA015
[n]	A. Deyhim, S. W. Hartman, and J. D. Kulesza, “Development of an Integrated Field Measurement System (IFMS) for NSLS II”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP238, pp. 1271-1273. 
[n]	A. E. Aksentyev and V. Senichev, “Spin Decoherence in the Frozen Spin Storage Ring Method of Search for a Particle EDM”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 864-866. doi:10.18429/JACoW-IPAC2019-MOPTS012
[n]	Y. Hao et al., “Start-to-End Simulation of eRHIC ERL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2535-2538. doi:10.18429/JACoW-IPAC2016-WEPMW044
[n]	H.-J. Kwon et al., “Beam Tests of the PEFP 20 MeV Accelerator”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP028, pp. 3434-3436. 
[n]	S. Sanaye Hajari, S. Doebert, and H. Shaker, “Sub-Harmonic Bunching System of CLIC Drive Beam Injector”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME047, pp. 1670-1672. 
[n]	W. Kaabi et al., “Power Couplers for XFEL”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO001, pp. 2310-2312. 
[n]	J. S. Schmidt, B. Koubek, and A. Schempp, “Simulations on the Boundary Fields of 4-rod RFQ Electrodes”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO020, pp. 3803-3805. 
[n]	J. S. Berg, “International Design Study of a Neutrino Factory”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THXMH02, pp. 3597-3601. 
[n]	J. F. Schmidt and W. Hillert, “Studies on Depolarization by Synchrotron Radiation using Elegant Particle Tracking”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 695-697. doi:10.18429/JACoW-IPAC2016-MOPOR046
[n]	J. S. Schmidt, B. Koubek, and A. Schempp, “Simulations of the Influence of 4-Rod RFQ Elements on its Voltage Distribution”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP038, pp. 3818-3820. 
[n]	C. Bracco et al., “Beam Transfer Line Design for a Plasma Wakefield Acceleration Experiment (AWAKE) at the CERN SPS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPEA051, pp. 1247-1249. 
[n]	J.-P. Thiry, A. Balling, A. Dieckmann, F. Frommberger, and W. Hillert, “The New Orbit Correction System at ELSA”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME006, pp. 479-481. 
[n]	I.-S. Hong et al., “Conceptual Design of the PEFP Beam Line”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP093, pp. 3581-3583. 
[n]	F. Meot, S. J. Brooks, V. Ptitsyn, D. Trbojevic, and N. Tsoupas, “End-to-end 9-D+SR Polarized Bunch Transport in eRHIC Energy-recovery Recirculator, Some Aspects”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2369-2371. doi:10.18429/JACoW-IPAC2015-TUPWI052
[n]	S. N. Andrianov and N. V. Kulabukhova, “Two and three Dimensional Models for Analytical and Numerical Space Charge Simulation”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA038, pp. 2585-2587. 
[n]	R. M. Hutcheon, “A Modelling Study of the Four-Rod RFQ”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0004, pp. 94-96. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search