Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. Joshi et al., “Quantum Efficiency Measurements of a Copper Photocathode in an RF Electron Gun”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2976-2979.
[n] H. Kamitsubo, “IPCR Separated Sector Cyclotron with K=540”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper ABI-02, pp. 13-22.
[n] P. Bhattacharyya et al., “Experiment and Analysis: Partial Loss of Insulation Vacuum in K-500 Superconducting Cyclotron During Energization”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP095, pp. 248-250.
[n] S. Zander, O. Boldt, F. Frommberger, W. Hillert, and O. Preisner, “Emittance Variation Dependence on Resonance Extraction Parameters at ELSA”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC073, pp. 1168-1170.
[n] Y. Li et al., “Experiment and Simulation Study on the Capture and Acceleration Process of XiPAF Synchrotron”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4409-4412. doi:10.18429/JACoW-IPAC2021-THPAB317
[n] L. Nadolski et al., “SOLEIL II project: entrance in the construction phase”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPB074, unpublished.
[n] M. Leitner et al., “Development of the Vertically Polarizing Hard X-Ray Undulator Segments for the Linear Coherent Light Source Upgrade (LCLS-II) Project”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3408-3413. doi:10.18429/JACoW-IPAC2019-THYPLM1
[n] E. D. Matias, “A Rational Approach to Control System Development Projects That Incorporates Risk Management”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOBAB05, pp. 513-516.
[n] S. Lanzone et al., “A Side Coupled Proton Linac Module 30-35 MeV: First Acceleration Tests”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TUP031, pp. 467-469.
[n] D. J. Holder, P. D. Quinn, and N. G. Wyles, “The SRS at Daresbury Laboratory: a Eulogy to the World's First Dedicated High-energy Synchrotron Radiation Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC062, pp. 2133-2135.
[n] A. Chincarini, G. Gemme, R. Parodi, and C. Antoine, “Statistical Approach to XPS Analysis: Application to Niobium Surface Treatment”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PR010, pp. XX-XX.
[n] J. H. Grimmer and R. T. Kmak, “Parametric Mechanical Design of New Insertion Devices at the APS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE004, pp. 889-891.
[n] Z. Qi and C. Feng, “Multi-color FEL generation through a chirped electron beam bunch train”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL075, unpublished.
[n] J. Barale et al., “Performance of the Bevalac”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1672-1675.
[n] H. Nissen and S. Grau, “CERN Safety Alarm Monitoring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS061, pp. 1674-1676.
[n] A. Fujita et al., “Improvement of Compact Pico-Second and Nano-Second Pulse Radiolysis Systems at Waseda University”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP027, pp. 1345-1347.
[n] S. Shope et al., “RADLAC-II Upgrade Experiments”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-41, pp. 628-630.
[n] C. Bazin et al., “CANDELA Photoinjector Progress Report”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1020-1023.
[n] J. C. Bourdon et al., “CLIO: Free Electron Laser in ORSAY”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 314-317.
[n] M. Lieuvin and A. R. A. Staff, “S.A.R.A. -- A Low Cost Heavy Ion Accelerator for 10 to 40 MeV/A”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2072-2077.
[n] V. Khodnevych et al., “Study of Short Bunches at the Free Electron Laser CLIO”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 78-80. doi:10.18429/JACoW-IPAC2016-MOPMB005
[n] E. J. C. Snively, K. C. Deering, and E. A. Nanni, “mm-Wave Linac Design for Next Generation VHEE Cancer Therapy Systems”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4090-4093. doi:10.18429/JACoW-IPAC2021-THPAB171
[n] C. Dickerson and G. Savard, “nuCARIBU commissioning at ATLAS”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper THPB048, unpublished.
[n] D. Angal-Kalinin et al., “Commissioning of the Indus-1 Storage Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3B01, pp. 687-689.
[n] A. Shapovalov, “Emittance Measurement Wizard”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP039, pp. XX-XX.
[n] E. A. Nanni et al., “Prototyping High-Gradient mm-Wave Accelerating Structures”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2902-2905. doi:10.18429/JACoW-IPAC2017-WEPAB138
[n] J. Sebek, “The SPEAR RF Cavity Characterization at Stanford Synchrotron Radiation Laboratory”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6V026, pp. 835-837.
[n] T. Brown et al., “Automation upgrade of the CXLS photoinjector”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3275-3277. doi:10.18429/JACoW-IPAC2024-THPG14
[n] M. Vretenar, Y. Cuvet, F. Gerigk, J. Marques Balula, and M. Pasini, “High Power RF Testing of a Cell Coupled Drift Tube LINAC Prototype for LINAC4”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA088, pp. 232-234.
[n] F. Havart, D. Chapuis, R. Nunes, and D. Vaxelaire, “Achieving a Highly Configurable Personnel Protection System for Experimental Areas”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC061, pp. 238-241.
[n] S. Hiroki et al., “Multi-wire Profile Monitor for J-PARC 3GeV RCS”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC036, pp. 1131-1133.
[n] L. Faillace et al., “Design, fabrication and mechanical tests of TIG-welded Ka-band accelerating structures for ultra-high gradient applications”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2976-2979. doi:10.18429/JACoW-IPAC2023-WEPA134
For LaTeX
Use Complete Form
For BibTeX
References
- C. Joshi et al., “Quantum Efficiency Measurements of a Copper Photocathode in an RF Electron Gun”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2976-2979.
- H. Kamitsubo, “IPCR Separated Sector Cyclotron with K=540”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper ABI-02, pp. 13-22.
- P. Bhattacharyya et al., “Experiment and Analysis: Partial Loss of Insulation Vacuum in K-500 Superconducting Cyclotron During Energization”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP095, pp. 248-250.
- S. Zander, O. Boldt, F. Frommberger, W. Hillert, and O. Preisner, “Emittance Variation Dependence on Resonance Extraction Parameters at ELSA”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC073, pp. 1168-1170.
- Y. Li et al., “Experiment and Simulation Study on the Capture and Acceleration Process of XiPAF Synchrotron”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4409-4412.
- L. Nadolski et al., “SOLEIL II project: entrance in the construction phase”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB074, this conference.
- M. Leitner et al., “Development of the Vertically Polarizing Hard X-Ray Undulator Segments for the Linear Coherent Light Source Upgrade (LCLS-II) Project”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3408-3413.
- E. D. Matias, “A Rational Approach to Control System Development Projects That Incorporates Risk Management”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUCOBAB05, pp. 513-516.
- S. Lanzone et al., “A Side Coupled Proton Linac Module 30-35 MeV: First Acceleration Tests”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper TUP031, pp. 467-469.
- D. J. Holder, P. D. Quinn, and N. G. Wyles, “The SRS at Daresbury Laboratory: a Eulogy to the World's First Dedicated High-energy Synchrotron Radiation Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC062, pp. 2133-2135.
- A. Chincarini, G. Gemme, R. Parodi, and C. Antoine, “Statistical Approach to XPS Analysis: Application to Niobium Surface Treatment”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PR010, pp. XX-XX.
- J. H. Grimmer and R. T. Kmak, “Parametric Mechanical Design of New Insertion Devices at the APS”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAE004, pp. 889-891.
- Z. Qi and C. Feng, “Multi-color FEL generation through a chirped electron beam bunch train”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL075, unpublished.
- J. Barale et al., “Performance of the Bevalac”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1672-1675.
- H. Nissen and S. Grau, “CERN Safety Alarm Monitoring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS061, pp. 1674-1676.
- A. Fujita et al., “Improvement of Compact Pico-Second and Nano-Second Pulse Radiolysis Systems at Waseda University”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP027, pp. 1345-1347.
- S. Shope et al., “RADLAC-II Upgrade Experiments”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-41, pp. 628-630.
- C. Bazin et al., “CANDELA Photoinjector Progress Report”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1020-1023.
- J. C. Bourdon et al., “CLIO: Free Electron Laser in ORSAY”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 314-317.
- M. Lieuvin and A. R. A. Staff, “S.A.R.A. -- A Low Cost Heavy Ion Accelerator for 10 to 40 MeV/A”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2072-2077.
- V. Khodnevych et al., “Study of Short Bunches at the Free Electron Laser CLIO”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 78-80.
- E. J. C. Snively, K. C. Deering, and E. A. Nanni, “mm-Wave Linac Design for Next Generation VHEE Cancer Therapy Systems”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4090-4093.
- C. Dickerson and G. Savard, “nuCARIBU commissioning at ATLAS”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper THPB048, unpublished.
- D. Angal-Kalinin et al., “Commissioning of the Indus-1 Storage Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP3B01, pp. 687-689.
- A. Shapovalov, “Emittance Measurement Wizard”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP039, pp. XX-XX.
- E. A. Nanni et al., “Prototyping High-Gradient mm-Wave Accelerating Structures”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2902-2905.
- J. Sebek, “The SPEAR RF Cavity Characterization at Stanford Synchrotron Radiation Laboratory”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6V026, pp. 835-837.
- T. Brown et al., “Automation upgrade of the CXLS photoinjector”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG14, pp. 3275-3277.
- M. Vretenar, Y. Cuvet, F. Gerigk, J. Marques Balula, and M. Pasini, “High Power RF Testing of a Cell Coupled Drift Tube LINAC Prototype for LINAC4”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA088, pp. 232-234.
- F. Havart, D. Chapuis, R. Nunes, and D. Vaxelaire, “Achieving a Highly Configurable Personnel Protection System for Experimental Areas”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC061, pp. 238-241.
- S. Hiroki et al., “Multi-wire Profile Monitor for J-PARC 3GeV RCS”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC036, pp. 1131-1133.
- L. Faillace et al., “Design, fabrication and mechanical tests of TIG-welded Ka-band accelerating structures for ultra-high gradient applications”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA134, pp. 2976-2979.
Back to search