Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. H. Lumpkin et al., “Investigations of Electron-Beam Microbunching and Beam Coalignment Using CTR in a High-Gain SASE FEL”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROAB011, pp. 550-552.
[n] S. K. Esin et al., “Beam Loss Study at High Intensity Proton Linac”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 754-757.
[n] S. H. Chang et al., “The Improvements of Vacuum Performance at Taiwan Light Source”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP39C, pp. 2175-2177.
[n] J. S. L. Yap et al., “Beam Characterisation Using MEDIPIX3 and EBT3 Film at the Clatterbridge Proton Therapy Beamline”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3510-3513. doi:10.18429/JACoW-IPAC2019-THPMP033
[n] A. H. Regan, “APT LLRF Control System Functionality and Architecture”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP68, pp. 225-227.
[n] N. Klein, “High Tc Materials for Microwave Applications: Update on Activities, Progress and Trends”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91D03, pp. XX-XX.
[n] F. Varela, F. B. Bernard, M. Gonzalez-Berges, H. Milcent, and L. B. Petrova, “Monitoring Control Applications at CERN”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU033, pp. 1141-1144.
[n] J. Demercastel-Soulier et al., “Improvement of Chemical Etching Capabilities (BCP) for SRF Spoke Resonators at IJCLab”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 590. doi:10.18429/JACoW-SRF2021-WEPCAV002
[n] K. Ko et al., “Design Parameters for the Damped Detuned Accelerating Structure”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPA04, pp. 1058-1060.
[n] M. A. Nozdrin et al., “JINR Photocathode Research: Status and Plans”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 62-64. doi:10.18429/JACoW-LINAC2018-MOPO010
[n] R. L. Brown et al., “The STAR Detector Magnet Subsystem”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P002, pp. 3230-3232.
[n] S. K. Esin, L. V. Kravchuk, V. A. Matveev, P. N. Ostroumov, and V. L. Serov, “Commissioning/Operation of the Moscow Meson Factory Linac”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO2-01, pp. 31-35.
[n] G. Mueller, M. Hein, N. Klein, H. Piel, and L. Ponto, “Microwave Properties of the New High Tc Superconductors and their Prossible Application for Accelerator Cavities”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 40-43.
[n] H. Joehri, C. Hess, L. Nue, L. Patthey, and T. Schmitt, “Development of the RIXS Manipulator”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 35-37. doi:10.18429/JACoW-MEDSI2016-MOPE16
[n] S. G. Arutunian et al., “Vibrating Wire Scanner Parameters Optimization”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT003, pp. 2460-2462.
[n] H. G. Blosser, J. Vincent, and R. Maughan, “Performance of the Harper Hospital Cyclotron; Effect of Pulsed Radio Frequency”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper II-07, pp. 133-137.
[n] F. Bourg et al., “The Caprice ECR Sources of Multicharged Ions New Results and a New Prototype”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEO01A, pp. 337-339.
[n] A. Pei et al., “The Indiana University Cooler Injector Synchrotron RF System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPP20, pp. 1705-1707.
[n] K. Papke and A. Grudiev, “Design of a RF Quadrupole Resonator for Landau Damping in HL-LHC”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 51-55. doi:10.18429/JACoW-SRF2017-MOPB004
[n] S. L. Birch and S. P. Stoneham, “10Hz Pulsed Power Converters for the ISIS Second Target Station(TS-2)”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD004, pp. 1440-1442.
For LaTeX
Use Complete Form
For BibTeX
References
- A. H. Lumpkin et al., “Investigations of Electron-Beam Microbunching and Beam Coalignment Using CTR in a High-Gain SASE FEL”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROAB011, pp. 550-552.
- S. K. Esin et al., “Beam Loss Study at High Intensity Proton Linac”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 754-757.
- S. H. Chang et al., “The Improvements of Vacuum Performance at Taiwan Light Source”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP39C, pp. 2175-2177.
- J. S. L. Yap et al., “Beam Characterisation Using MEDIPIX3 and EBT3 Film at the Clatterbridge Proton Therapy Beamline”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3510-3513.
- A. H. Regan, “APT LLRF Control System Functionality and Architecture”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP68, pp. 225-227.
- N. Klein, “High Tc Materials for Microwave Applications: Update on Activities, Progress and Trends”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91D03, pp. XX-XX.
- F. Varela, F. B. Bernard, M. Gonzalez-Berges, H. Milcent, and L. B. Petrova, “Monitoring Control Applications at CERN”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU033, pp. 1141-1144.
- J. Demercastel-Soulier et al., “Improvement of Chemical Etching Capabilities (BCP) for SRF Spoke Resonators at IJCLab”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 590.
- K. Ko et al., “Design Parameters for the Damped Detuned Accelerating Structure”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPA04, pp. 1058-1060.
- M. A. Nozdrin et al., “JINR Photocathode Research: Status and Plans”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 62-64.
- R. L. Brown et al., “The STAR Detector Magnet Subsystem”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P002, pp. 3230-3232.
- S. K. Esin, L. V. Kravchuk, V. A. Matveev, P. N. Ostroumov, and V. L. Serov, “Commissioning/Operation of the Moscow Meson Factory Linac”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO2-01, pp. 31-35.
- G. Mueller, M. Hein, N. Klein, H. Piel, and L. Ponto, “Microwave Properties of the New High Tc Superconductors and their Prossible Application for Accelerator Cavities”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 40-43.
- H. Joehri, C. Hess, L. Nue, L. Patthey, and T. Schmitt, “Development of the RIXS Manipulator”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 35-37.
- S. G. Arutunian et al., “Vibrating Wire Scanner Parameters Optimization”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT003, pp. 2460-2462.
- H. G. Blosser, J. Vincent, and R. Maughan, “Performance of the Harper Hospital Cyclotron; Effect of Pulsed Radio Frequency”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper II-07, pp. 133-137.
- F. Bourg et al., “The Caprice ECR Sources of Multicharged Ions New Results and a New Prototype”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEO01A, pp. 337-339.
- A. Pei et al., “The Indiana University Cooler Injector Synchrotron RF System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPP20, pp. 1705-1707.
- K. Papke and A. Grudiev, “Design of a RF Quadrupole Resonator for Landau Damping in HL-LHC”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 51-55.
- S. L. Birch and S. P. Stoneham, “10Hz Pulsed Power Converters for the ISIS Second Target Station(TS-2)”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPD004, pp. 1440-1442.
Back to search