JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	S. Seletskiy and P. Tenenbaum, “The Optimized Bunch Compressor for the International Linear Collider”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEOAAB02, pp. 1958-1960. 
[n]	T. Furuya et al., “The TRISTAN Superconducting Cavities”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87A06, pp. XX-XX. 
[n]	M. Delheusy, C. Z. Antoine, A. Stierle, and H. Dosch, “In-situ Investigation of the Nb/Oxygen Interfaces - Correlation with the Properties of the Nb RF Superconducting Cavities”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP04, pp. 240-240. 
[n]	P. Lanz, M. Zach, and M. Lipnicky, “A Dual Frequency Resonator”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1151-1154. 
[n]	C. Jamet et al., “Failure Mode and Effects Analysis of the Beam Intensity Control for the SPIRAL2 Accelerator”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPF28, pp. 613-616. 
[n]	H. Guler et al., “RF Conditioning of the XFEL Power Couplers at the Industrial Scale”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB102, pp. 1387-1389. 
[n]	M. L. Lopes et al., “Magnetic Design Constraints of Helical Solenoids”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2731-2733. doi:10.18429/JACoW-IPAC2014-WEPRI100
[n]	G. S. Abrams et al., “Fast Energy and Energy Spectrum Feedback in the SLC Linac”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1258-1261. 
[n]	C. Gruen, S. Schreiber, and T. Schulz, “A Laser Pulse Controller for the Injector Laser at FLASH and European XFEL”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 882-884. doi:10.18429/JACoW-LINAC2016-THPLR019
[n]	B. Burnham, V. N. Litvinenko, and Y. Wu, “Application of Precision Magnetic Measurements for Control of the Duke Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAA01, pp. 524-526. 
[n]	C. Antoine, A. Aspart, S. Regnault, and A. Chincarini, “Surface Studies: Method of Analysis and Results”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper MA007, pp. XX-XX. 
[n]	L. H. Chang, M. C. Lin, G. H. Luo, and Ch. Wang, “Calculation of the Maximum Stored Beam Current Considering the Phase Noise of a Generator RF Signal”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPG034, pp. 2670-2672. 
[n]	L. T. Sun et al., “First Intense Beam at JUNA 400 kV Underground Accelerator”, presented at the HIAT'22, Darmstadt, Germany, Jun.-Jul. 2022, paper FR2I1, unpublished. 
[n]	B. R. Reichardt, D. Domont-Yankulova, H. Klingbeil, and D. E. M. Lens, “Tuning of 3-tap Bandpass Filter During Acceleration for Longitudinal Beam Stabilization at FAIR”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4866-4868. doi:10.18429/JACoW-IPAC2018-THPML089
[n]	M. Yu et al., “Fabrication and Test of Short Helical Solenoid Model Based on YBCO Tape”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP153, pp. 1118-1120. 
[n]	J. Henderson, A. Aiken, E. Snedden, and N. Joshi, “Stabilised timing links for the CLARA test facility”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4131-4134. doi:10.18429/JACoW-IPAC2023-THPA072
[n]	T. L. Hart and D. J. Summers, “An Inverse Cyclotron for Muon Cooling”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MO3PB01, pp. 97-101. 
[n]	N. Steinhau-K??hl et al., “Electro Polishing at DESY”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP46, pp. 442-446. 
[n]	O. Holme, D. R. S. Di Calafiori, G. Dissertori, L. Djambazov, W. Lustermann, and S. Zelepoukine, “Re-integration and Consolidation of the Detector Control System for the Compact Muon Solenoid Electromagnetic Calorimeter”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC035, pp. 154-157. 
[n]	V. N. Litvinenko, Y. Wu, B. Burnham, J.M.J. Madey, and S. H. Park, “Performance of Achromatic Lattice with Combined Function Sextupoles at Duke Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAB22, pp. 796-798. 
[n]	J. Guo et al., “Investigation of 26MHz RFQ Accelerators”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D048, pp. 196-198. 
[n]	A. Bosotti et al., “New Developments in the Control Electronics for the Milan Superconducting Cyclotron RF System”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F2-06, pp. 216-219. 
[n]	W. Merz, C. Ankenbrandt, and K. Koepke, “Transition Jump System for the Fermilab Booster”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1343-1346. 
[n]	G. Milcinski, M. Plesko, and M. Sekoranja, “Experiences with Advanced CORBA Services”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP005, pp. XX-XX. 
[n]	U. Laier et al., “Status and Recent Development of FAIR Ring RF Systems”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1037-1040. doi:10.18429/JACoW-IPAC2021-MOPAB334
[n]	A. Kasliwal, R. Banwari, S. Kotaiah, T. G. Pandit, and A. Upadhyay, “Utilizing Multiplier Stack's Reflected Parasitic Capacitance to Achieve ZVS Operation of Resonant Inverter for 750 keV DC Accelerator”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA036, pp. 677-678. 
[n]	N. Voumard, C. Boucly, M. P. Pimentel, P. Van Trappen, and L. Strobino, “Use of Multi-Network Fieldbus for Integration of Low-Level Intelligent Controller Within Control Architecture of Fast Pulsed System at CERN”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 590. doi:10.18429/JACoW-ICALEPCS2019-MOPHA152
[n]	M. Buttner, J. Lauener, K. Sigerud, M. Sobczak, N. Stapley, and P. Charrue, “The DIAMON Project -- Monitoring and Diagnostics for the CERN Controls Infrastructure”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPA35, pp. 588-590. 
[n]	V. N. Litvinenko et al., “Commissioning of the Duke Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAA08, pp. 213-215. 
[n]	S. T. Littleton, A. S. Fisher, C. Huang, and T. O. Raubenheimer, “Nano-Amp Beam Current Diagnostic for Linac-to-ESA (LESA) Beamline”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 285-287. doi:10.18429/JACoW-IBIC2023-TUP042
[n]	T. Mattison, R. Cassel, A. Donaldson, G. Gross, and A. Harvey, “Operational Experience with SLC Damping Ring Kicker Magnets”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2331-2334. 
[n]	G. Chiozzi et al., “ALMA Common Software (ACS), Status and Development”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP101, pp. 313-315. 
[n]	C. Limborg, J. E. Clendenin, D. H. Dowell, S. Gierman, and J. Schmerge, “New Optimization for the LCLS Photo-injector”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI041, pp. 1789-1791. 
[n]	T. W. Winkelmann et al., “Status Report at the Heidelberg Ion-Beam Therapy (HIT) Ion Sources and the Testbench”, in Proc. ECRIS'14, Nizhny Novgorod, Russia, Aug. 2014, paper MOPPH004, pp. 49-51. 
[n]	H. A. Day, M. J. Barnes, and L. M. C. Feliciano, “Impedance Studies of the LHC Injection Kicker Magnets for HL-LHC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 370-373. doi:10.18429/JACoW-IPAC2015-MOPJE038
[n]	M. Sekoranja, I. Verstovsek, and J. Bobnar, “Evolution of Visual DCT”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WOPA05, pp. 313-315. 
[n]	J. Bahrdt et al., “Characterization and Implementation of the Cryogenic Permanent Magnet Undulator CPMU17 at Bessy II”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1415-1418. doi:10.18429/JACoW-IPAC2019-TUPGW014

For LaTeX

Use Complete Form

For BibTeX

References

Back to search