Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Fahmie, “Design of the Advanced Light Source Timing System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1869-1872.
[n] L. M. Russo et al., “Gateware and Software for ALS-U Instrumentation”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1536-1541. doi:10.18429/JACoW-ICALEPCS2023-THPDP080
[n] J. Kang et al., “Design Study of the 30 MeV Cyclotron Magnet”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS078, pp. 2559-2561.
[n] V. Kamerdzhiev et al., “Concluding the operation and development of COSY”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1653-1656. doi:10.18429/JACoW-IPAC2024-TUPS10
[n] C. D. Moore, J. Firebaugh, P. Lucas, and P. Prieto, “Status of Resonant Extraction from the Fermilab Main Injector”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA73, pp. 1246-1248.
[n] G. A. Karamysheva and Yu. N. Denisov, “Complex ``ALFA'' After 10 Years of Operation on Track Membranes Production”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2212-2214. doi:10.18429/JACoW-IPAC2014-WEPRO106
[n] R. H. A. Farias et al., “The LNLS 500 MeV Booster Synchrotron”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2B18, pp. 705-707.
[n] J. R. Sauer, M. Fotino, R. H. Milburn, and C. K. Sinclair, “A Laser Induced Compton Back-Scattered Photon Beam at the Cambridge Electron Accelerator”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 1069-1073.
[n] K.-Y. Ng, “Optimized Wakefield Computations Using a Network Model”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOE05, pp. 275-277.
[n] J. Campmany, D. Einfeld, J. Marcos, and V. Massana, “General description of IDs initially installed at ALBA”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA055, pp. 2609-2611.
[n] R. Kazimi, J. Grames, A. Hofler, C. Hernandez-Garcia, and G. Palacios Serrano, “Polarized electron injector for positron production at CEBAF”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2727-2730. doi:10.18429/JACoW-IPAC2023-WEPA035
[n] K. R. L. Baker, I. D. Finch, and M. Romanovschi, “Maintaining a Hybrid Control System at ISIS with a Vsystem/EPICS Bridge”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 986-992. doi:10.18429/JACoW-ICALEPCS2023-WE2BCO04
[n] W. H. Tan, P. Piot, and A. Zholents, “Start-to-End Simulation of the Drive-Beam Longitudinal Dynamics for Beam-Driven Wakefield Acceleration”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 858-861. doi:10.18429/JACoW-NAPAC2019-WEPLO06
[n] L. Philippe, P. Gillette, and G. Normand, “User Interfaces for the Spiral2 Machine Protection System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC102, pp. 818-821.
[n] B. Kalantari and T. Korhonen, “New Features of the SLS Timing System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP543, pp. XX-XX.
[n] C. P. Stoll, F. Hug, and D. Simon, “Beam Break Up Simulations for the MESA Accelerator”, in Proc. ERL'17, Geneva, Switzerland, Jun. 2017, pp. 26-28. doi:10.18429/JACoW-ERL2017-MOPSPP009
[n] J. A. Martin, “Conference Summary”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper H-01, pp. 1863-1863.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Fahmie, “Design of the Advanced Light Source Timing System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1869-1872.
- L. M. Russo et al., “Gateware and Software for ALS-U Instrumentation”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP080, pp. 1536-1541.
- J. Kang et al., “Design Study of the 30 MeV Cyclotron Magnet”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS078, pp. 2559-2561.
- V. Kamerdzhiev et al., “Concluding the operation and development of COSY”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS10, pp. 1653-1656.
- C. D. Moore, J. Firebaugh, P. Lucas, and P. Prieto, “Status of Resonant Extraction from the Fermilab Main Injector”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA73, pp. 1246-1248.
- G. A. Karamysheva and Yu. N. Denisov, “Complex ``ALFA'' After 10 Years of Operation on Track Membranes Production”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2212-2214.
- R. H. A. Farias et al., “The LNLS 500 MeV Booster Synchrotron”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP2B18, pp. 705-707.
- J. R. Sauer, M. Fotino, R. H. Milburn, and C. K. Sinclair, “A Laser Induced Compton Back-Scattered Photon Beam at the Cambridge Electron Accelerator”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 1069-1073.
- K.-Y. Ng, “Optimized Wakefield Computations Using a Network Model”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOE05, pp. 275-277.
- J. Campmany, D. Einfeld, J. Marcos, and V. Massana, “General description of IDs initially installed at ALBA”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA055, pp. 2609-2611.
- R. Kazimi, J. Grames, A. Hofler, C. Hernandez-Garcia, and G. Palacios Serrano, “Polarized electron injector for positron production at CEBAF”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA035, pp. 2727-2730.
- K. R. L. Baker, I. D. Finch, and M. Romanovschi, “Maintaining a Hybrid Control System at ISIS with a Vsystem/EPICS Bridge”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper WE2BCO04, pp. 986-992.
- W. H. Tan, P. Piot, and A. Zholents, “Start-to-End Simulation of the Drive-Beam Longitudinal Dynamics for Beam-Driven Wakefield Acceleration”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 858-861.
- L. Philippe, P. Gillette, and G. Normand, “User Interfaces for the Spiral2 Machine Protection System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC102, pp. 818-821.
- B. Kalantari and T. Korhonen, “New Features of the SLS Timing System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP543, pp. XX-XX.
- C. P. Stoll, F. Hug, and D. Simon, “Beam Break Up Simulations for the MESA Accelerator”, in Proc. 59th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'17), Geneva, Switzerland, Jun. 2017, pp. 26-28.
- J. A. Martin, “Conference Summary”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper H-01, pp. 1863-1863.
Back to search