Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Giovannozzi et al., “Experimental Observations from the LHC Dynamic Aperture Machine Development Study in 2012”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA046, pp. 2606-2608.
[n] M. Ge, P. N. Koufalis, G. Kulina, M. Liepe, and J. T. Maniscalco, “Low-temperature Baking and Infusion Studies for High-gradient ILC SRF Cavities”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 466-469. doi:10.18429/JACoW-LINAC2018-TUPO057
[n] S. Ito, H. Matsuzaki, Y. Miyairi, A. Morita, N. Nakano, and Y. Sunohara, “Status Report on RAPID, 1.7MV Tandem Accelerator System, the University of Tokyo”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA061, pp. 217-219.
[n] M. F. Vorogushin, “ELECTROPHYSICAL SYSTEMS BASED on CHARGED PARTICLE ACCELERATORS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper MOAI02, pp. XX-XX.
[n] M. K. Fukuda et al., “Improvement of X-Ray Generation by Using Laser Compton Scattering in Laser Undulator Compact X-Ray Source(LUCX)”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1207-1209. doi:10.18429/JACoW-NAPAC2016-THPOA51
[n] M. Cornacchia, “SASE Based 4th Generation Light Sources and the LCLS Project”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEAL3, pp. 267-271.
[n] B. Keil et al., “Design of the SwissFEL BPM System”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC25, pp. 427-430.
[n] S. Pei et al., “Conceptual Design of the Drive Beam for a PWFA-LC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP079, pp. 2682-2684.
[n] Z. P. Li, Y. Li, and J. Peng, “Beam Parameters Measurement and Correction in CSNS Linac”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 576-578. doi:10.18429/JACoW-LINAC2018-TUPO115
[n] M. Cornacchia, “THE PATH TOWARDS X-RAY FREE-ELECTRON LASERS”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper TUBM01, pp. XX-XX.
[n] T. Aumeyr et al., “ZEMAX Simulations for an Optical System for a Diffraction Radiation Monitor at CesrTA”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA051, pp. 789-791.
[n] J. Y. Huang et al., “RHIC Injection Transport Beam Emittance Measurements”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPF04, pp. 45-48.
[n] D. Li et al., “Recent Progress on the Design of Normal Conducting APEX-II VHF CW Electron Gun”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1891-1894. doi:10.18429/JACoW-IPAC2019-TUPRB097
[n] K. Saito et al., “Behavior of Electropolished Niobium Cavities Under Different Cooldown Conditions”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91F04, pp. XX-XX.
[n] A. H. Lumpkin, M. Wendt, and J. M. Byrd, “Feasibility of Diagnostics Undulator Studies at ASTA”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper THPD25, pp. 591-594.
[n] Z. G. Li et al., “The High Quality Water Cooling System for a 100 MeV Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 205-207. doi:10.18429/JACoW-Cyclotrons2016-TUP16
[n] I. R. Bailey et al., “Spin Tracking at the International Linear Collider”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN083, pp. 2901-2903.
[n] B. Yildirim, S. Choroba, V. V. Katalev, P. Morozov, Y. Nachtigal, and E. M. Apostolov, “Series Production of the Specific Waveguide Distribution for the European XFEL at DESY”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 380-383. doi:10.18429/JACoW-LINAC2018-TUPO027
[n] T. T. Nakamura et al., “The Construction of the SuperKEKB Magnet Control System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 897-900. doi:10.18429/JACoW-ICALEPCS2015-WEPGF085
[n] EE. Lee, K. H. Chung, H. G. Joo, S. K. Kauh, and S. K. Ko, “Physics Design of a Photo Fission Ion Source (PHIS)”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC063, pp. 4200-4201.
[n] M. A. Kempkes, F. O. Arntz, M. P. J. Gaudreau, A. Kardo-Sysoev, and A. Krasnykh, “A Kicker Driver for the International Linear Collider”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN111, pp. 2972-2974.
[n] M. G. Konrad, D. G. Maxwell, and G. Shen, “Continuous Integration and Continuous Delivery at FRIB”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 145-147. doi:10.18429/JACoW-PCAPAC2016-FRITPLCO01
[n] H. Bartosik et al., “Recent Beam Performance Achievements with the Pb-Ion Beam in the SPS for LHC Physics Runs”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 250-253. doi:10.18429/JACoW-IPAC2019-MOPGW069
[n] P. Evtushenko, A. Freyberger, C. Liu, and A. H. Lumpkin, “Near-Field Optical Diffraction Radiation Measurements at CEBAF”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH011, pp. 254-257.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Giovannozzi et al., “Experimental Observations from the LHC Dynamic Aperture Machine Development Study in 2012”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA046, pp. 2606-2608.
- M. Ge, P. N. Koufalis, G. Kulina, M. Liepe, and J. T. Maniscalco, “Low-temperature Baking and Infusion Studies for High-gradient ILC SRF Cavities”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 466-469.
- S. Ito, H. Matsuzaki, Y. Miyairi, A. Morita, N. Nakano, and Y. Sunohara, “Status Report on RAPID, 1.7MV Tandem Accelerator System, the University of Tokyo”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA061, pp. 217-219.
- M. F. Vorogushin, “ELECTROPHYSICAL SYSTEMS BASED on CHARGED PARTICLE ACCELERATORS”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper MOAI02, pp. XX-XX.
- M. K. Fukuda et al., “Improvement of X-Ray Generation by Using Laser Compton Scattering in Laser Undulator Compact X-Ray Source(LUCX)”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1207-1209.
- M. Cornacchia, “SASE Based 4th Generation Light Sources and the LCLS Project”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEAL3, pp. 267-271.
- B. Keil et al., “Design of the SwissFEL BPM System”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPC25, pp. 427-430.
- S. Pei et al., “Conceptual Design of the Drive Beam for a PWFA-LC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP079, pp. 2682-2684.
- Z. P. Li, Y. Li, and J. Peng, “Beam Parameters Measurement and Correction in CSNS Linac”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 576-578.
- M. Cornacchia, “THE PATH TOWARDS X-RAY FREE-ELECTRON LASERS”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper TUBM01, pp. XX-XX.
- T. Aumeyr et al., “ZEMAX Simulations for an Optical System for a Diffraction Radiation Monitor at CesrTA”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA051, pp. 789-791.
- J. Y. Huang et al., “RHIC Injection Transport Beam Emittance Measurements”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOPF04, pp. 45-48.
- D. Li et al., “Recent Progress on the Design of Normal Conducting APEX-II VHF CW Electron Gun”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1891-1894.
- K. Saito et al., “Behavior of Electropolished Niobium Cavities Under Different Cooldown Conditions”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91F04, pp. XX-XX.
- A. H. Lumpkin, M. Wendt, and J. M. Byrd, “Feasibility of Diagnostics Undulator Studies at ASTA”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper THPD25, pp. 591-594.
- Z. G. Li et al., “The High Quality Water Cooling System for a 100 MeV Cyclotron”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 205-207.
- I. R. Bailey et al., “Spin Tracking at the International Linear Collider”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN083, pp. 2901-2903.
- B. Yildirim, S. Choroba, V. V. Katalev, P. Morozov, Y. Nachtigal, and E. M. Apostolov, “Series Production of the Specific Waveguide Distribution for the European XFEL at DESY”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 380-383.
- T. T. Nakamura et al., “The Construction of the SuperKEKB Magnet Control System”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 897-900.
- EE. Lee, K. H. Chung, H. G. Joo, S. K. Kauh, and S. K. Ko, “Physics Design of a Photo Fission Ion Source (PHIS)”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC063, pp. 4200-4201.
- M. A. Kempkes, F. O. Arntz, M. P. J. Gaudreau, A. Kardo-Sysoev, and A. Krasnykh, “A Kicker Driver for the International Linear Collider”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN111, pp. 2972-2974.
- M. G. Konrad, D. G. Maxwell, and G. Shen, “Continuous Integration and Continuous Delivery at FRIB”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 145-147.
- H. Bartosik et al., “Recent Beam Performance Achievements with the Pb-Ion Beam in the SPS for LHC Physics Runs”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 250-253.
- P. Evtushenko, A. Freyberger, C. Liu, and A. H. Lumpkin, “Near-Field Optical Diffraction Radiation Measurements at CEBAF”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH011, pp. 254-257.
Back to search