Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. D. O et al., “Measurement of the UCLA/URLS/INFN Hybrid Gun”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS035, pp. 2418-2420.
[n] K. T. Hsu, K. K. Lin, and T. S. Ueng, “Tune and Bunch Length Measurements of SRRC Booster During Ramping”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1684-1687.
[n] J. R. Chen, G. Y. Hsiung, K. T. Hsu, C. H. Kuo, and T. F. Lin, “Development of Local Orbit Feedback for Taiwan Light Source”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP45C, pp. 1714-1716.
[n] R. P. Fliller et al., “NSLS-II Transport Line Performance”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC042, pp. 1820-1822.
[n] M. Ichikawa, H. Fujisawa, Y. Iwashita, T. Sugimoto, H. Tongu, and M. Yamada, “Development of Very Small ECR H+ Ion Source with Pulse Gas Valve”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP032, pp. 423-425.
[n] V. Sajaev, A. Douryan, R. Malone, X. Wang, and V. Yakimenko, “Diagnostics and Correction of the Electron Beam Trajectory in the Cornell Wiggler at the Accelerator Test Facility”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA151, pp. 2942-2944.
[n] R. L. Warnock, J. A. Ellison, K. A. Heinemann, and G. Q. Zhang, “Meshless Solution of the Vlasov Equation Using a Low-discrepancy Sequence”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP109, pp. 1776-1778.
[n] J. Haimson, “A Low Emittance High Duty Factor Injector Linac”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 592-595.
[n] R. E. Pollock, “Status Report on the Indiana University Cyclotron Facility (Invited paper)”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper A-02, pp. 27-32.
[n] D. Alesini et al., “Sliced Beam Parameter Measurements”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUOA01, pp. 146-150.
[n] J. C. Huang, H. Kitamura, T. Kohda, C. K. Yang, and C. S. Yang, “Performance of TPS Cryogenic Permanent Magnet Undulators at NSRRC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4278-4280. doi:10.18429/JACoW-IPAC2019-THPTS071
[n] W. Anders et al., “BERLinPro: a Prototype ERL for Future Synchrotron Light Sources”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO017, pp. 223-227.
[n] P. S. Martin, “Operational Experience with Superconducting Synchrotron Magnets”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1379-1383.
[n] L. P. Michelotti and S. Ohnuma, “Dipole Shuffling in the Fermilab Energy Saver”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2472-2475.
[n] D. Schulte, G. Arduini, V. Baglin, J. M. Jimenez, and F. Zimmermann, “Electron Cloud Measurements in the SPS in 2004”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAP014, pp. 1371-1373.
[n] J. H. H. Lee, K.-J. Boller, T. Denis, and P. J. M. van der Slot, “The Design Of A Multi-Beam Electron Gun For A Photonic Free-Electron Laser”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper WEPB20, pp. 427-430.
[n] K. M. Wilson et al., “Mechanical Cavity Design for 100MV Upgrade Cryomodule”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB064, pp. 2866-2868.
[n] H. A. Baldis et al., “Electron Beam and RF Characterization of a High-Brightness X-Band Photoinjector”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH065, pp. 2245-2247.
[n] D. Kipnis, E. Dyunin, and A. Gover, “Smith-Purcell Distributed Feedback Laser”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP049, pp. XX-XX.
[n] W.-T. Weng et al., “Comparison of Accelerator Technologies for use in ADSS”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOOBN3, pp. 4-6.
[n] L. K. Len et al., “The NRL Modified Betatron Accelerator”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 446-449.
[n] C. R. Chen et al., “The Correlation between the Beam Orbit Stability and the Utilities at SRRC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP38C, pp. 2309-2311.
[n] J.-C. Denard, A. Saha, and G. Lavessière, “High Accuracy Beam Current Monitor System for CEBAF's Experimental Hall A”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH103, pp. 2326-2328.
[n] M. Kondo, “Invited Paper: Recent Developments at the Osaka RCNP 230-cm Cyclotron and a Proposal for a New Ring Accelerator”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper A-06, pp. 1904-1911.
[n] F. Hinode et al., “Commissioning of ITC-RF Gun for t-ACTS Project at Tohoku University”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THPA31, pp. 547-550.
[n] W. X. Cheng et al., “NSLS2 Diagnostic Systems Commissioning and Measurements”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOIZB1, pp. 16-23.
[n] J.-L. Boutes and P. Maccioni, “Industrial Production of SC RF Accelerating Cavities at CERCA”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F10, pp. 587-588.
[n] C. P. Neuman, W. S. Graves, and P. G. O'Shea, “A Non-Interrupting Electron Beam Diagnostic using Coherent Off-Axis Undulator Radiation”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA28, pp. 1949-1951.
[n] J.-H. Jang, Y.-S. Cho, H. S. Kim, H.-J. Kwon, and Y. Y. Lee, “Physics Design of the PEFP RCS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP069, pp. 1448-1450.
[n] R. P. Fliller, R. Heese, S. Kowalski, J. Rose, T. V. Shaftan, and G. M. Wang, “Beam Stacking in the NSLS-II Booster”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC041, pp. 1817-1819.
[n] R. L. Poirier, I. Enchevich, T. Enegren, and S. J. Mai, “Parallel Bias vs Perpendicular Bias of a Ferrite Tuned Cavity for the TRIUMF KAON-Factory Bosster Ring”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1321-1324.
[n] V. Petrillo et al., “Generation of a Train of Short Pulses by Means of FEL Emission of a Combed Electron Beam”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper MOICNO01, pp. 2-5.
[n] J. I. M. Botman, H. L. Hagedoorn, W. J. G. M, J. A. Van Der Heide, and W. Van Genderren, “Proposal for Racetrack Microtrons as Driver for a Free Electron Laser and as Injector for an Electron Storage Ring”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 453-456.
[n] H. Hsieh, R. Yourd, and M. Zisman, “Design and Construction of the PEP-II Low-Energy Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP099G, pp. 454-456.
[n] F. Caspers, M. Morvillo, F. Ruggiero, J. Tan, and H. Tsutsui, “Surface Resistance Measurements of LHC Dipole Beam Screen Samples”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP7B11, pp. 376-378.
[n] H. Zhu, X. C. Lou, and Q. L. Xiu, “Detector Beam Background Simulations for CEPC”, in Proc. HF'14, Beijing, China, Oct. 2014, paper SAT2A2, pp. 184-187.
[n] D. E. Johnson and S. Ohnuma, “MESSYMESH - An Improved Version”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper C02, pp. 119-121.
[n] S. Ohnuma, “Computer Programs for Particle Motion in Linacs”, in Proc. LINAC'63, New Heaven, CT, USA, Oct. 1963, paper 1-02, pp. 14-28.
[n] W. M. Fawley, G. Penn, A. Sessler, and J. S. Wurtele, “Studies of the Front End of a Neutrino Factory”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAC011, pp. 748-750.
[n] X. Liu, T. Adachi, S. Harada, T. Iwashita, K. Takayama, and T. Yoshimoto, “Longitudinal Beam Motion in the KEK Digital Accelerator: Tracking Simulation and Experimental Results”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper PO13, pp. 83-88.
[n] P. Maccioni and J. L. Boutes, “Progress on the Industrial Production of SC Cavities at CERCA”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I14, pp. XX-XX.
[n] K. A. Heinemann, J. A. Ellison, and M. Vogt, “Quasiperiodic Method of Averaging Applied to Planar Undulator Motion Excited by a Fixed Traveling Wave”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper MOPSO31, pp. 762-766.
[n] B. Haerer and B. J. Holzer, “Challenges and Status of the FCC-ee Lattice Design”, in Proc. HF'14, Beijing, China, Oct. 2014, paper THT4B3, pp. 40-44.
[n] H. Hama et al., “Linear Focal Cherenkov Ring Camera for the t-ACTS Injector”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPB51, pp. 516-518.
[n] Y. Y. Wei, Q. Qin, G. Xu, W. B. Liu, D. M. Zhou, and Y. Chen, “Optics Correction in BEPCII using response matrix”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper TUACH11, pp. XX-XX.
[n] H. Souda et al., “Laser Cooling of Bunched Ion Beam at S-LSR”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP054, pp. 3488-3490.
[n] C. Schlemper, X. Jiang, and M. Vogel, “Next Generation of SRF-Guns: Low Secondary Electron Yield Based on a Thin Film Approach”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB047, pp. 673-677.
[n] G. Bassi and J. A. Ellison, “CSR Effects in a Bunch Compressor: Influence of the Beam Frame Transverse Force”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP022, pp. XX-XX.
[n] E. Chyhyrynets et al., “Cu/Nb QPR Surface Preparation Protocol in the Framework of ARIES Project”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 121. doi:10.18429/JACoW-SRF2021-SUPTEV003
[n] N. Sipahi et al., “RF Design of a 1.3-GHz High Average Beam Power SRF Electron Source”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 789-791. doi:10.18429/JACoW-NAPAC2016-WEPOA42
[n] Y. Suetsugu and K. Shibata, “Development of a Movable Collimator with Low Beam Impedance”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THOBKI01, pp. 2587-2589.
[n] D. Krieg, S. Khan, and K. Sokolowski-Tinten, “First Conceptual Design Studies of an Electron Source for Ultrafast Electron Diffraction at DELTA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4530-4533. doi:10.18429/JACoW-IPAC2018-THPMK097
[n] J. T. Maniscalco et al., “Statistical Modeling of Peak Accelerating Gradients in LCLS-II and LCLS-II-HE”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 804. doi:10.18429/JACoW-SRF2021-THPCAV009
[n] A. D. Kovalenko, “Status of the Nuclotron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 161-165.
[n] T. Fujisawa et al., “Design of Radio-Frequency System for the RIKEN Separated Sector Cyclotron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2897-2900.
[n] N. Akasaka, T. Kageyama, K. Kanazawa, K. Sato, Y. Suetsugu, and Y. Takeuchi, “Development of the Movable Mask System for KEKB”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1A17, pp. 2301-2303.
[n] C. Bahamonde Castro et al., “Improved Protection of the Warm Magnets of the LHC Betatron Cleaning Insertion”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 72-75. doi:10.18429/JACoW-IPAC2017-MOPAB004
[n] V. E. Scarpine et al., “First Beam Measurements of the FNAL HINS RFQ”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM076, pp. 359-363.
[n] T. Shintake, T. Higo, K. Mori, M. Sato, and Y. Suetsugu, “Electrostatic Beam Separation System of TRISTAN Main Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1480-1483.
[n] K. Yoshida et al., “Commissioning of a Compact Synchrotron Radiation Source at Hiroshima University”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6B002, pp. 653-657.
[n] C. Curatolo, L. Serafini, M. W. Krasny, and W. Placzek, “New Simulation Programs for Partially Stripped Ions - Laser Light Collisions”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4249-4251. doi:10.18429/JACoW-IPAC2018-THPMF076
[n] F. E. Hannon, “Design of a High Charge, Low Energy, Magnetized Electron Injector”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4564-4566. doi:10.18429/JACoW-IPAC2018-THPMK107
[n] K. Suda et al., “Design of Coupler for Direct Coupled Amplifier to Drift Tube Linac Cavities of the Injector RILAC2 for RIKEN RI Beam Factory”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB095, pp. 684-686.
[n] S. Kashiwagi et al., “Development of a conduction cooling system for S-band niobium-tin superconducting RF cavities using cryocoolers”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPB051, unpublished.
[n] R. Ganter et al., “Commissioning of a Diode / RF Photogun Combination”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC35, pp. 317-320.
[n] P. K. Saha et al., “Beam Loss Issues Connected to the Foil Scattering: Estimation vs. Measurement at the RCS of J-PARC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP067, pp. 1442-1444.
[n] K. Ammigan et al., “The RaDIATE High-Energy Proton Materials Irradiation Experiment at the Brookhaven Linac Isotope Producer Facility”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3593-3596. doi:10.18429/JACoW-IPAC2017-WEPVA138
[n] T. Torims, “3D Printing (Additive Manufacturing) Applied to Accelerator Components”, presented at the HIAT'22, Darmstadt, Germany, Jun.-Jul. 2022, paper TU1I1, unpublished.
[n] D. Trbojevic et al., “A Proton Driver for the Muon Collider Source with a Tunable Momentum Compaction Lattice”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7W017, pp. 1030-1032.
[n] M. L. Neubauer et al., “Injection Locked 1497 MHz Magnetron”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4322-4324. doi:10.18429/JACoW-IPAC2019-THPTS090
[n] K. Kanazawa and Y. Suetsugu, “Development of a Bellows Assembly with RF-Shield for KEKB”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP068G, pp. 1072-1074.
[n] M. Min and P. F. Fischer, “Scalable High-order Algorithms for Wakefield Simulations”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC061, pp. 1865-1867.
[n] K. T. Hsu et al., “A Dynamic Local Bump System for Producing Synchrotron Radiation with an Alternate Elliptical Polarization”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P060, pp. 3749-3751.
[n] M. Ohno et al., “Performance of the Vacuum System for SORTEC 1 GeV Electron Storage Ring”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1335-1338.
[n] A. M. Watson and M. D. Shinn, “JLIFE: The Jefferson Lab Interactive Front End for the Optical Propagation Code”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper MOPSO82, pp. 149-151.
[n] C.-G. Granqvist et al., “Materials Science Applications of Heavy Ion Beams from the Gustaf Werner Cyclotron”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP03C, pp. 2460-2463.
[n] K. W. Leo, T. Adachi, T. Kawakubo, T. Monma, K. Takayama, and T. S. Dixit, “A Compact Hadron Driver for Cancer Therapies with Continuous Energy Sweep Scanning”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper FRM1C03, pp. 291-293.
[n] M. C. Lin, C. Nieter, D. N. Smithe, and P. Stoltz, “Accurate and Efficient Study of RF Cavities by Using a Conformal FDTD Method”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP083, pp. 4503-4503.
[n] V. Kumar and K.-J. Kim, “Numerical Simulation Studies of Smith-Purcell Free-Electron Lasers”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP026, pp. XX-XX.
[n] J. D. Klein and J. F. Sheehan, “Microprocessor Techniques and Construction at the NSLS”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2222-2225.
[n] C. Pira et al., “Nb3Sn on Cu SRF cavities R&D at INFN LNL”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7030, unpublished.
[n] K. Satou et al., “Development of a Beam Induced Heat-Flow Monitor for the Beam Dump of the J-PARC RCS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN047, pp. 4084-4086.
[n] X. Boling, J. I. M. Botman, A. T. A. M, H. L. Hagedoorn, A. H. Kemper, and C. J. Timmermans, “Magnetic Performance of the EUTERPE Ring Dipole”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2232-2235.
[n] K. Tsumaki, N. Kumagai, and H. Tanaka, “Sensitivity Reduction Against Misalignment of Quadrupole and Sextupole Magnets”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1698-1701.
[n] M. Li et al., “Modification of the Short Straight Sections of the High Energy Booster of the SSC”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 236-239.
[n] M. Popovic, “Muon Test Area at Fermilab”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT118, pp. 812-814.
[n] F. X. Karl et al., “RHIC Survey and Alignment”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2919-2922.
[n] A. H. Lumpkin, W. J. Berg, and B. X. Yang, “Planned Optical Diagnostics for the APS Low-Energy Undulator Test Line”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3V019, pp. 871-873.
[n] Z. Y. Guo et al., “Study of the Beam-Photoelectron Instability in BEPC”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D020, pp. 432-434.
[n] C. Mitsuda et al., “Injection Section Upgrading with the Septum-Magnet Replacement in KEK-PF Ring”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 342-345. doi:10.18429/JACoW-IPAC2021-MOPAB091
[n] S. V. Benson, “Cavity Length Change vs. Mirror Steering in a Ring Confocal Resonator”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP069, pp. 516-520.
[n] J. D. Fox and P. Corredoura, “Amplification and Damping of Synchrotron Oscillations via a Parametric Process”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1079-1082.
[n] C. Johnstone, A. Bross, and I. Rakhno, “The MuCool Test Area at Fermilab”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPT060, pp. 3482-3484.
[n] Y. C. Chae et al., “A 2-GeV, 1-MW Pulsed Proton Source for a Spallation Source”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP002G, pp. 521-523.
[n] T. Watanabe, S. Takano, and H. Tanaka, “Updates on Hardware Developments for SPring-8-II”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4209-4212. doi:10.18429/JACoW-IPAC2018-THPMF061
[n] R. Hajima et al., “The JAERI Superconducting RF Linac Driver for an Industrial 1.3 micron 40 kW Highly-efficient Free-Electron Laser”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5A07, pp. 758-760.
[n] K. Shibata et al., “Commissioning Status of SuperKEKB Vacuum System”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 226. doi:10.18429/JACoW-eeFACT2018-WEOAB01
[n] T. Kwan and B. B. Godfrey, “Simulations of Free Electron Laser”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3833-3836.
[n] M. Gyr et al., “Resonant Third-Integer Extraction from the PS2”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP027, pp. 1593-1595.
[n] E. J. Curry, S. Fabbri, P. Musumeci, and A. Gover, “THz Based Phase-Space Manipulation in a Guided IFEL”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 519-522. doi:10.18429/JACoW-FEL2015-TUP069
[n] G. Cox et al., “Status of the ERLP Control System”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB38, pp. 244-246.
[n] Y. Tan, B. Goddard, C. Barbier, and D. Anderson, “Cold plate upgrade at the SNS”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3748-3750. doi:10.18429/JACoW-IPAC2024-THPS11
For LaTeX
Use Complete Form
For BibTeX
References
- B. D. O et al., “Measurement of the UCLA/URLS/INFN Hybrid Gun”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS035, pp. 2418-2420.
- K. T. Hsu, K. K. Lin, and T. S. Ueng, “Tune and Bunch Length Measurements of SRRC Booster During Ramping”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1684-1687.
- J. R. Chen, G. Y. Hsiung, K. T. Hsu, C. H. Kuo, and T. F. Lin, “Development of Local Orbit Feedback for Taiwan Light Source”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP45C, pp. 1714-1716.
- R. P. Fliller et al., “NSLS-II Transport Line Performance”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC042, pp. 1820-1822.
- M. Ichikawa, H. Fujisawa, Y. Iwashita, T. Sugimoto, H. Tongu, and M. Yamada, “Development of Very Small ECR H+ Ion Source with Pulse Gas Valve”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP032, pp. 423-425.
- V. Sajaev, A. Douryan, R. Malone, X. Wang, and V. Yakimenko, “Diagnostics and Correction of the Electron Beam Trajectory in the Cornell Wiggler at the Accelerator Test Facility”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA151, pp. 2942-2944.
- R. L. Warnock, J. A. Ellison, K. A. Heinemann, and G. Q. Zhang, “Meshless Solution of the Vlasov Equation Using a Low-discrepancy Sequence”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP109, pp. 1776-1778.
- J. Haimson, “A Low Emittance High Duty Factor Injector Linac”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 592-595.
- R. E. Pollock, “Status Report on the Indiana University Cyclotron Facility (Invited paper)”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper A-02, pp. 27-32.
- D. Alesini et al., “Sliced Beam Parameter Measurements”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUOA01, pp. 146-150.
- J. C. Huang, H. Kitamura, T. Kohda, C. K. Yang, and C. S. Yang, “Performance of TPS Cryogenic Permanent Magnet Undulators at NSRRC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4278-4280.
- W. Anders et al., “BERLinPro: a Prototype ERL for Future Synchrotron Light Sources”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO017, pp. 223-227.
- P. S. Martin, “Operational Experience with Superconducting Synchrotron Magnets”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1379-1383.
- L. P. Michelotti and S. Ohnuma, “Dipole Shuffling in the Fermilab Energy Saver”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2472-2475.
- D. Schulte, G. Arduini, V. Baglin, J. M. Jimenez, and F. Zimmermann, “Electron Cloud Measurements in the SPS in 2004”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAP014, pp. 1371-1373.
- J. H. H. Lee, K.-J. Boller, T. Denis, and P. J. M. van der Slot, “The Design Of A Multi-Beam Electron Gun For A Photonic Free-Electron Laser”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper WEPB20, pp. 427-430.
- K. M. Wilson et al., “Mechanical Cavity Design for 100MV Upgrade Cryomodule”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB064, pp. 2866-2868.
- H. A. Baldis et al., “Electron Beam and RF Characterization of a High-Brightness X-Band Photoinjector”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH065, pp. 2245-2247.
- D. Kipnis, E. Dyunin, and A. Gover, “Smith-Purcell Distributed Feedback Laser”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUPP049, pp. XX-XX.
- W.-T. Weng et al., “Comparison of Accelerator Technologies for use in ADSS”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOOBN3, pp. 4-6.
- L. K. Len et al., “The NRL Modified Betatron Accelerator”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 446-449.
- C. R. Chen et al., “The Correlation between the Beam Orbit Stability and the Utilities at SRRC”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP38C, pp. 2309-2311.
- J.-C. Denard, A. Saha, and G. Lavessière, “High Accuracy Beam Current Monitor System for CEBAF's Experimental Hall A”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH103, pp. 2326-2328.
- M. Kondo, “Invited Paper: Recent Developments at the Osaka RCNP 230-cm Cyclotron and a Proposal for a New Ring Accelerator”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper A-06, pp. 1904-1911.
- F. Hinode et al., “Commissioning of ITC-RF Gun for t-ACTS Project at Tohoku University”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper THPA31, pp. 547-550.
- W. X. Cheng et al., “NSLS2 Diagnostic Systems Commissioning and Measurements”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOIZB1, pp. 16-23.
- J.-L. Boutes and P. Maccioni, “Industrial Production of SC RF Accelerating Cavities at CERCA”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95F10, pp. 587-588.
- C. P. Neuman, W. S. Graves, and P. G. O'Shea, “A Non-Interrupting Electron Beam Diagnostic using Coherent Off-Axis Undulator Radiation”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA28, pp. 1949-1951.
- J.-H. Jang, Y.-S. Cho, H. S. Kim, H.-J. Kwon, and Y. Y. Lee, “Physics Design of the PEFP RCS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP069, pp. 1448-1450.
- R. P. Fliller, R. Heese, S. Kowalski, J. Rose, T. V. Shaftan, and G. M. Wang, “Beam Stacking in the NSLS-II Booster”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC041, pp. 1817-1819.
- R. L. Poirier, I. Enchevich, T. Enegren, and S. J. Mai, “Parallel Bias vs Perpendicular Bias of a Ferrite Tuned Cavity for the TRIUMF KAON-Factory Bosster Ring”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1321-1324.
- V. Petrillo et al., “Generation of a Train of Short Pulses by Means of FEL Emission of a Combed Electron Beam”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper MOICNO01, pp. 2-5.
- J. I. M. Botman, H. L. Hagedoorn, W. J. G. M, J. A. Van Der Heide, and W. Van Genderren, “Proposal for Racetrack Microtrons as Driver for a Free Electron Laser and as Injector for an Electron Storage Ring”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 453-456.
- H. Hsieh, R. Yourd, and M. Zisman, “Design and Construction of the PEP-II Low-Energy Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP099G, pp. 454-456.
- F. Caspers, M. Morvillo, F. Ruggiero, J. Tan, and H. Tsutsui, “Surface Resistance Measurements of LHC Dipole Beam Screen Samples”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP7B11, pp. 376-378.
- H. Zhu, X. C. Lou, and Q. L. Xiu, “Detector Beam Background Simulations for CEPC”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper SAT2A2, pp. 184-187.
- D. E. Johnson and S. Ohnuma, “MESSYMESH - An Improved Version”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper C02, pp. 119-121.
- S. Ohnuma, “Computer Programs for Particle Motion in Linacs”, in Proc. 1963 Conf. on Proton Linear Accelerators (LINAC'63), New Heaven, CT, USA, Oct. 1963, paper 1-02, pp. 14-28.
- W. M. Fawley, G. Penn, A. Sessler, and J. S. Wurtele, “Studies of the Front End of a Neutrino Factory”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FOAC011, pp. 748-750.
- X. Liu, T. Adachi, S. Harada, T. Iwashita, K. Takayama, and T. Yoshimoto, “Longitudinal Beam Motion in the KEK Digital Accelerator: Tracking Simulation and Experimental Results”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper PO13, pp. 83-88.
- P. Maccioni and J. L. Boutes, “Progress on the Industrial Production of SC Cavities at CERCA”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I14, pp. XX-XX.
- K. A. Heinemann, J. A. Ellison, and M. Vogt, “Quasiperiodic Method of Averaging Applied to Planar Undulator Motion Excited by a Fixed Traveling Wave”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper MOPSO31, pp. 762-766.
- B. Haerer and B. J. Holzer, “Challenges and Status of the FCC-ee Lattice Design”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper THT4B3, pp. 40-44.
- H. Hama et al., “Linear Focal Cherenkov Ring Camera for the t-ACTS Injector”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEPB51, pp. 516-518.
- Y. Y. Wei, Q. Qin, G. Xu, W. B. Liu, D. M. Zhou, and Y. Chen, “Optics Correction in BEPCII using response matrix”, in Proc. 40th ICFA Advanced Beam Dynamics Workshop on High Luminosity e+e- Factories (Factories'08), Novosibirsk, Russia, Apr. 2008, paper TUACH11, pp. XX-XX.
- H. Souda et al., “Laser Cooling of Bunched Ion Beam at S-LSR”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP054, pp. 3488-3490.
- C. Schlemper, X. Jiang, and M. Vogel, “Next Generation of SRF-Guns: Low Secondary Electron Yield Based on a Thin Film Approach”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB047, pp. 673-677.
- G. Bassi and J. A. Ellison, “CSR Effects in a Bunch Compressor: Influence of the Beam Frame Transverse Force”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUPP022, pp. XX-XX.
- E. Chyhyrynets et al., “Cu/Nb QPR Surface Preparation Protocol in the Framework of ARIES Project”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 121.
- N. Sipahi et al., “RF Design of a 1.3-GHz High Average Beam Power SRF Electron Source”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 789-791.
- Y. Suetsugu and K. Shibata, “Development of a Movable Collimator with Low Beam Impedance”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THOBKI01, pp. 2587-2589.
- D. Krieg, S. Khan, and K. Sokolowski-Tinten, “First Conceptual Design Studies of an Electron Source for Ultrafast Electron Diffraction at DELTA”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4530-4533.
- J. T. Maniscalco et al., “Statistical Modeling of Peak Accelerating Gradients in LCLS-II and LCLS-II-HE”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 804.
- A. D. Kovalenko, “Status of the Nuclotron”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 161-165.
- T. Fujisawa et al., “Design of Radio-Frequency System for the RIKEN Separated Sector Cyclotron”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2897-2900.
- N. Akasaka, T. Kageyama, K. Kanazawa, K. Sato, Y. Suetsugu, and Y. Takeuchi, “Development of the Movable Mask System for KEKB”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1A17, pp. 2301-2303.
- C. Bahamonde Castro et al., “Improved Protection of the Warm Magnets of the LHC Betatron Cleaning Insertion”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 72-75.
- V. E. Scarpine et al., “First Beam Measurements of the FNAL HINS RFQ”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM076, pp. 359-363.
- T. Shintake, T. Higo, K. Mori, M. Sato, and Y. Suetsugu, “Electrostatic Beam Separation System of TRISTAN Main Ring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1480-1483.
- K. Yoshida et al., “Commissioning of a Compact Synchrotron Radiation Source at Hiroshima University”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6B002, pp. 653-657.
- C. Curatolo, L. Serafini, M. W. Krasny, and W. Placzek, “New Simulation Programs for Partially Stripped Ions - Laser Light Collisions”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4249-4251.
- F. E. Hannon, “Design of a High Charge, Low Energy, Magnetized Electron Injector”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4564-4566.
- K. Suda et al., “Design of Coupler for Direct Coupled Amplifier to Drift Tube Linac Cavities of the Injector RILAC2 for RIKEN RI Beam Factory”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB095, pp. 684-686.
- S. Kashiwagi et al., “Development of a conduction cooling system for S-band niobium-tin superconducting RF cavities using cryocoolers”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB051, unpublished.
- R. Ganter et al., “Commissioning of a Diode / RF Photogun Combination”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC35, pp. 317-320.
- P. K. Saha et al., “Beam Loss Issues Connected to the Foil Scattering: Estimation vs. Measurement at the RCS of J-PARC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP067, pp. 1442-1444.
- K. Ammigan et al., “The RaDIATE High-Energy Proton Materials Irradiation Experiment at the Brookhaven Linac Isotope Producer Facility”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3593-3596.
- T. Torims, “3D Printing (Additive Manufacturing) Applied to Accelerator Components”, presented at the 15th International Conference on Heavy Ion Accelerator Technology (HIAT'22), Darmstadt, Germany, Jun.-Jul. 2022, paper TU1I1, unpublished.
- D. Trbojevic et al., “A Proton Driver for the Muon Collider Source with a Tunable Momentum Compaction Lattice”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7W017, pp. 1030-1032.
- M. L. Neubauer et al., “Injection Locked 1497 MHz Magnetron”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4322-4324.
- K. Kanazawa and Y. Suetsugu, “Development of a Bellows Assembly with RF-Shield for KEKB”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP068G, pp. 1072-1074.
- M. Min and P. F. Fischer, “Scalable High-order Algorithms for Wakefield Simulations”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC061, pp. 1865-1867.
- K. T. Hsu et al., “A Dynamic Local Bump System for Producing Synchrotron Radiation with an Alternate Elliptical Polarization”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P060, pp. 3749-3751.
- M. Ohno et al., “Performance of the Vacuum System for SORTEC 1 GeV Electron Storage Ring”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1335-1338.
- A. M. Watson and M. D. Shinn, “JLIFE: The Jefferson Lab Interactive Front End for the Optical Propagation Code”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper MOPSO82, pp. 149-151.
- C.-G. Granqvist et al., “Materials Science Applications of Heavy Ion Beams from the Gustaf Werner Cyclotron”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP03C, pp. 2460-2463.
- K. W. Leo, T. Adachi, T. Kawakubo, T. Monma, K. Takayama, and T. S. Dixit, “A Compact Hadron Driver for Cancer Therapies with Continuous Energy Sweep Scanning”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper FRM1C03, pp. 291-293.
- M. C. Lin, C. Nieter, D. N. Smithe, and P. Stoltz, “Accurate and Efficient Study of RF Cavities by Using a Conformal FDTD Method”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP083, pp. 4503-4503.
- V. Kumar and K.-J. Kim, “Numerical Simulation Studies of Smith-Purcell Free-Electron Lasers”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUPP026, pp. XX-XX.
- J. D. Klein and J. F. Sheehan, “Microprocessor Techniques and Construction at the NSLS”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2222-2225.
- C. Pira et al., “Nb3Sn on Cu SRF cavities R&D at INFN LNL”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP7030, this conference.
- K. Satou et al., “Development of a Beam Induced Heat-Flow Monitor for the Beam Dump of the J-PARC RCS”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN047, pp. 4084-4086.
- X. Boling, J. I. M. Botman, A. T. A. M, H. L. Hagedoorn, A. H. Kemper, and C. J. Timmermans, “Magnetic Performance of the EUTERPE Ring Dipole”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2232-2235.
- K. Tsumaki, N. Kumagai, and H. Tanaka, “Sensitivity Reduction Against Misalignment of Quadrupole and Sextupole Magnets”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1698-1701.
- M. Li et al., “Modification of the Short Straight Sections of the High Energy Booster of the SSC”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 236-239.
- M. Popovic, “Muon Test Area at Fermilab”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT118, pp. 812-814.
- F. X. Karl et al., “RHIC Survey and Alignment”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2919-2922.
- A. H. Lumpkin, W. J. Berg, and B. X. Yang, “Planned Optical Diagnostics for the APS Low-Energy Undulator Test Line”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3V019, pp. 871-873.
- Z. Y. Guo et al., “Study of the Beam-Photoelectron Instability in BEPC”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D020, pp. 432-434.
- C. Mitsuda et al., “Injection Section Upgrading with the Septum-Magnet Replacement in KEK-PF Ring”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 342-345.
- S. V. Benson, “Cavity Length Change vs. Mirror Steering in a Ring Confocal Resonator”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper TUP069, pp. 516-520.
- J. D. Fox and P. Corredoura, “Amplification and Damping of Synchrotron Oscillations via a Parametric Process”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1079-1082.
- C. Johnstone, A. Bross, and I. Rakhno, “The MuCool Test Area at Fermilab”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPT060, pp. 3482-3484.
- Y. C. Chae et al., “A 2-GeV, 1-MW Pulsed Proton Source for a Spallation Source”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP002G, pp. 521-523.
- T. Watanabe, S. Takano, and H. Tanaka, “Updates on Hardware Developments for SPring-8-II”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4209-4212.
- R. Hajima et al., “The JAERI Superconducting RF Linac Driver for an Industrial 1.3 micron 40 kW Highly-efficient Free-Electron Laser”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5A07, pp. 758-760.
- K. Shibata et al., “Commissioning Status of SuperKEKB Vacuum System”, in Proc. 62nd ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'18), Hong Kong, China, Sep. 2018, pp. 226.
- T. Kwan and B. B. Godfrey, “Simulations of Free Electron Laser”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3833-3836.
- M. Gyr et al., “Resonant Third-Integer Extraction from the PS2”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP027, pp. 1593-1595.
- E. J. Curry, S. Fabbri, P. Musumeci, and A. Gover, “THz Based Phase-Space Manipulation in a Guided IFEL”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 519-522.
- G. Cox et al., “Status of the ERLP Control System”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPB38, pp. 244-246.
- Y. Tan, B. Goddard, C. Barbier, and D. Anderson, “Cold plate upgrade at the SNS”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS11, pp. 3748-3750.
Back to search