JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	H. Hähnel, G. Dollinger, J. Sonpar, M. Mayerhofer, and R. Helm, “A novel test cavity setup for surface conductivity measurements of additive manufacturing samples”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 363-366. doi:10.18429/JACoW-LINAC2024-TUPB019
[n]	R. J. Nawrocky, R. F. Frankel, and M. G. Thomas, “Magnet Power Supply for ISABELLE”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4075-4078. 
[n]	R. J. Nawrocky, J. Galayda, D. M. Shu, and L. H. Yu, “A Beam Profile Monitor for the NSLS VUV Ring Employing Linear Photodiode Arrays”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1893-1896. 
[n]	M. Rabasa et al., “CFD studies and experimental validation of the convective heat transfer coefficient in non-fully developed flows applied to conventional geometries used in particle accelerators”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4912-4915. doi:10.18429/JACoW-IPAC2023-THPM010
[n]	N. Milleron, “Some Recent Developments in Vacuum Techniques for Acclerators and Storage Rings”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 794-804. 
[n]	I. Frolov, A. Silin, and A. I. Vaguine, “A New Approach in Development of Data Flow Control and Investigation System for Computer Networks”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 329-332. doi:10.18429/JACoW-ICALEPCS1991-S08NC11
[n]	H. Kugler, S. Battisti, D. Brandt, J. P. Potier, and A. Verdier, “Closed Orbit Distortions and Their Corrections in the 600 MeV Electron-Positron Accumulator at LEP”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 758-761. 
[n]	M. Neubauer, J. Wessel, M. Popovic, R. Lentz, T. Blassick, and T. Wynn, “An input port for a high-power magnetron”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPR31, unpublished. 
[n]	E. Wang et al., “DBR-SL-GaAs surface charge limit observation and suppressing for EIC high charge polarized source”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPC45, unpublished. 
[n]	H. Halama, “Ion Clearing and Photoelectron Production in the 200 MeV SXLS ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2313-2316. 
[n]	D. Reistad, B. G?Ñlnander, K. Rathsman, and A. O. Sidorin, “Calculations on High-energy Electron Cooling in the HESR”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper MOA2C05, pp. 44-48. 
[n]	T. Schmidt et al., “Magnetic Design of an Apple III Undulator for SwissFEL”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP043, pp. 116-120. 
[n]	I. Chaikovska et al., “Experimental Activities on High Intensity Positron Sources Using Channeling”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2910-2913. doi:10.18429/JACoW-IPAC2017-WEPIK002
[n]	A. I. Ageev et al., “The IHEP Accelerating and Storage Complex - Status and Development”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 233-237. 
[n]	G. R. White et al., “The EPICS Software Framework Moves from Controls to Physics”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1216-1218. doi:10.18429/JACoW-IPAC2019-TUZZPLM3
[n]	F. Bakkali Taheri et al., “Spectra of Coherent Smith-Purcell Radiation Observed from Short Electron Bunches: Numerical and Experimental Studies”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA056, pp. 801-803. 
[n]	I. Jirousek et al., “The Concept of the PROSCAN Patient Safety System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TH215, pp. XX-XX. 
[n]	N. Steinhau-K??hl et al., “Basic Studies for the Electro Polishing Facility at DESY”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PZ003, pp. XX-XX. 
[n]	G. Penco et al., “Beam Optics Measurements at FERMI by using Wire-Scanner”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 101-104. doi:10.18429/JACoW-FEL2015-MOP034
[n]	M. Okamura, “Laser-Based Heavy Ion Production”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TU2002, pp. 219-221. 
[n]	A. K. Orduz et al., “Beam Commissioning SPIRAL2”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2540-2543. doi:10.18429/JACoW-IPAC2021-WEXB05
[n]	J. K. Bair et al., “Design Considerations for the ORNL 25 MV Tandem Accelerator”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1655-1659. 
[n]	M. Martini, M. Aiba, and C. Carli, “Evolution Beam Parameters During Injection and Storage of the High Brightness Beams Envisaged for the Linac4 Injection into the CERN PS Booster”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA25, pp. 134-136. 
[n]	S. J. Bean et al., “A New Traveling Interferometric Scheme for the APS Upgrade of the 2-ID Bionanoprobe”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 345. doi:10.18429/JACoW-MEDSI2020-THOA02
[n]	R. Damm, A. Otis, and V. LoGrasso, “Quadrupole Focusing System for the 200 MeV Linac”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper F-7, pp. 561-577. 
[n]	J. N. Weaver, “Controls for Operating and Processing the MIT-LNS Linac”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 576-580. 
[n]	M. Lieuvin, “SARA - Grenoble Status Report”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper ABC-06, pp. 81-88. 
[n]	M. Canzari et al., “A Technology Downselection for SKA User Interface Generator”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1006. doi:10.18429/JACoW-ICALEPCS2019-WEMPL005
[n]	A. Hofmann and K. W. Robinson, “Measurement of Cross Section of a High-Energy Electron Beam by Means of the X-Ray Portion of the Synchrotron Radiation”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 937-939. 
[n]	G. G. Oksuzyan, E. D. Gazazyan, M. Ivanyan, A. T. Margaryan, and A. D. Ter-Poghosyan, “Ultra-high Frequency Scanning Cavities for Non-relativistic Electron Beam”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT005, pp. 2466-2468. 
[n]	J. L. Conradie et al., “Status Report and New Developments at iThemba LABS”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MOPPT032, pp. 94-96. 
[n]	S. S. Chang et al., “Operational Status of the PLS Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP091G, pp. 581-583. 
[n]	T. Hiatt et al., “Cryogenic Testing of the RF Input Waveguide for the CEBAF Upgrade Cryomodule”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH158, pp. 1155-1157. 
[n]	J.-C. Denard, P. Piot, K. Capek, and E. Feldl, “High Power Beam Profile Monitor with Optical Transition Radiation”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P062, pp. 2198-2200. 
[n]	K. Hanke et al., “Status of the Linac4 Project at CERN”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD015, pp. 702-704. 
[n]	T. Tominaka, M. Okamura, and T. Katayama, “Analytical Field Calculation of Helical Dipole Magnets for RHIC Snake”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P018, pp. 3437-3439. 
[n]	I. N. Birukov, V. A. Moiseev, and P. N. Ostroumov, “Analysis of the Closed Orbit Distortions in the MMF Storage Ring”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1447-1449. 
[n]	L. Harwood, G. Biallas, A. Guerra, W. Heilbrunn, and J. Karn, “Magnet Design and Performance for the CEBAF Beam Transport System”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1350-1353. 
[n]	A. Latina et al., “CompactLight Design Study”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 85-88. doi:10.18429/JACoW-FLS2018-WEP1WC02
[n]	P. Kneisel and B. Lewis, “Advanced Surface Cleaning Methods - Three Years of Experience with High Pressure Ultrapure Water Rinsing of Superconducting Cavities”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95L02, pp. 311-327. 
[n]	T. L. Lavine et al., “Binary RF Pulse Compression Experiment at SLAC”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 940-943. 
[n]	W. Ebeling, “The Transverse Feedback System in DESY”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2285-2287. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search