Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Iwata et al., “Upgrade of Septum Magnets for Fast Extraction in J-Parc Main Ring”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2103-2105. doi:10.18429/JACoW-IPAC2022-WEPOTK024
[n] X. Wu et al., “Installation, operations, and upgrade of a CS-30 cyclotron for the production of alpha emitters At-211 and Ac-225 at the Ionetix TAT facility”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPB048, unpublished.
[n] M. Zampetakis et al., “Refining the LHC Longitudinal Impedance Model”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 559-562. doi:10.18429/JACoW-HB2023-THBP37
[n] M. Okamura, J. M. Fite, V. Lo Destro, D. Raparia, and J. Ritter, “Steering Magnet Design for a Limited Space”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP005, pp. 136-138.
[n] Y. G. Song, S. Y. Cho, and J. H. Kim, “EPICS DAQ System for Beam Position Monitor at the KOMAC Linac and Beamlines”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 447-449. doi:10.18429/JACoW-ICALEPCS2021-TUPV027
[n] J. P. Dai, “Design Study of Beijing XFEL Test Facility”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP025, pp. XX-XX.
[n] J. Friedl, “DELTA, The Dortmund Electron Test Storage Ring Accelerator”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 463-466.
[n] D. Bruhwiler, J. R. Cary, R. E. Giacone, P. Mardahl, and J. Verboncoeur, “Simulations of Plasma Wakefield Acceleration with XOOPIC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2B04, pp. 877-879.
[n] A. Dolinskii et al., “Simulation Results on Cooling Times and Equilibrium Parameters for Antiproton Beams at the HESR”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT057, pp. 1972-1974.
[n] G. Lawler et al., “High gradient operation of cryogenic C-band RF photogun at UCLA”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 527-530. doi:10.18429/JACoW-IPAC2024-MOPR32
[n] Yu. A. Kubyshin, A. V. Aloev, N. I. Pakhomov, and V. I. Shvedunov, “A Novel Electron Gun for Off-axis Beam Injection”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP290, pp. 2029-2031.
[n] S. Keckert et al., “Mitigation of Parasitic Losses in the Quadrupole Resonator Enabling Direct Measurements of Low Residual Resistances of SRF Samples”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1196-1199. doi:10.18429/JACoW-IPAC2022-TUPOTK005
[n] E. Wisniewski et al., “Fabrication study of corrugated structure for sub-THz by stacking disks”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPR28, unpublished.
[n] J. P. Koutchouk, “Architecture of the LEP Application Software”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1199-1202.
[n] B. Bondarev, A. Durkin, Y. Ivanov, I. Shumakov, and S. Vinogradov, “Some Results of RFQ Modelling Based on New Possibilities of LIDOS.RFQ Codes”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE110, pp. 1616-1618.
[n] M. Zhang and Q. G. Zhou, “Study of Nonlinear Beam Dynamics Effects for DEPU at SSRF”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC075, pp. 1347-1349.
[n] D. Suddeth, “Microwave Ridged Waveguide Beam Pickups”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1886-1888.
[n] K. Kawa, T. Szumlak, C. Kokkinos, and F. Lackner, “High fidelity numerical modelling and condition monitoring applied to septum magnets at CERN”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3556-3559. doi:10.18429/JACoW-IPAC2024-THPR29
[n] R. Ferdinand et al., “Final Results of the SPIRAL2 Injector Commissioning”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 848-851. doi:10.18429/JACoW-IPAC2019-MOPTS006
[n] R. L. Parise et al., “Development of Diffusion Bonded Joints of AA6061 Aluminum Alloy to AISI 316LN Stainless Steel for Sirius Planar Undulators”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3459-3462. doi:10.18429/JACoW-IPAC2021-WEPAB334
[n] D. Young, “Design of Drift Tube Linacs”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper B-03, pp. 76-97.
[n] C. Liu et al., “Longitudinal Dynamics Simulation at Transition Crossing in RHIC with New Landau Cavity”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper MOPAB08, pp. 37-39.
[n] N. D. West, “The Nimrod Injector”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper A-04, pp. 38-49.
[n] M. Shimada and Y. Kobayashi, “Design of a 2-Loop Compact ERL”, in Proc. ERL'09, Ithaca, NY, USA, Jun. 2009, paper WG208, pp. 50-52.
[n] I. Miura et al., “Proposal for a New Ring Accelerator”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper C-08, pp. 2074-2077.
[n] C. Liu, K. A. Drees, A. Marusic, M. G. Minty, and C. Montag, “Global Optics Correction for Low Energy RHIC Run”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper MOPAB05, pp. 34-36.
[n] S. Iwata et al., “Development of a pulse current monitoring device for the Eddy septum magnets in J-PARC main ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2463-2466. doi:10.18429/JACoW-IPAC2023-TUPM104
[n] A. I. Novokshonov et al., “Scintillator Nonproportionality Studies at PITZ”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 277-280. doi:10.18429/JACoW-IBIC2022-TUP21
[n] I. N. Meshkov, “NICA Project at JINR”, in Proc. COOL'11, Alushta, Ukraine, Sep. 2011, paper MOIO02, pp. 6-9.
[n] C. Dickey, G. V. Karpov, J. Madey, A. S. Medvedko, E. I. Shubin, and N. I. Zinevich, “NMR System for Magnetic Field Measurements at the MARK-3 Free Electron Laser”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP009G, pp. 2541-2542.
[n] A. Bonatto et al., “On the Development of a Low Peak-Power, High Repetition-Rate Laser Plasma Accelerator at IPEN”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1713-1716. doi:10.18429/JACoW-IPAC2021-TUPAB141
[n] S. Ohnuma, “Phase Oscillation and Transverse Focusing”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper B-02, pp. 65-75.
[n] M. Vogel, X. Jiang, P. Murcek, J. Schaber, C. Wang, and R. Xiang, “Initial Study of GaN Thin Films for Photocathodes Prepared by Magnetron Sputtering on Copper Substrates”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2850-2852. doi:10.18429/JACoW-IPAC2021-WEPAB109
[n] C. Carli and M. Haj Tahar, “Systematic Effects Limiting the Sensitivity of Magic Energy" Proton EDM Rings"”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 602-605. doi:10.18429/JACoW-IPAC2021-MOPAB178
[n] C. Toth et al., “Colliding Pulse Injection Experiments in Non-Collinear Geometry for Controlled Laser Plasma Wakefield Acceleration of Electrons”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN112, pp. 2975-2977.
[n] L. Ristori et al., “Cold Tests of SSR1 Resonators Manufactured by IUAC for the Fermilab PIP-II Project”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB073, pp. 750-753.
[n] F. Gao, R. B. Deng, Z. Jiang, S. Xiang, L. Yin, and S. K. Sharma, “Hammerhead Support Design and Application at SSRF”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 60-62. doi:10.18429/JACoW-MEDSI2018-TUPH16
[n] J. Y. Tang et al., “SNS Vacuum Instrumentation and Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP062, pp. XX-XX.
[n] P. N. Potukuchi et al., “Fabrication of Superconducting Niobium Resonators at IUAC”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper C-06, pp. 266-270.
[n] I. Bazarov, M. Lakshmanan, and T. Miyajima, “Maximum achievable beam brightness from photoinjectors”, in Proc. ERL'09, Ithaca, NY, USA, Jun. 2009, paper PLT20, pp. XX-XX.
[n] A. Bonatto, R. Pakter, and F. B. Rizzato, “Nonlinear Propagation of Laser Pulses in Plasmas: a Comparison between Numerical and Analytical Solutions”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD033, pp. 4349-4351.
[n] A. V. Fedotov et al., “Beam Dynamics Limits for Low-Energy RHIC Operation”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA10, pp. 75-77.
[n] L. Smith, “The New Bevatron Injector”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper A-01, pp. 1-6.
[n] N. A. Vinokurov et al., “Status of the Novosibirsk Terahertz FEL”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUCOS01, pp. XX-XX.
[n] O. Okhrimenko, V. Iakovenko, V. M. Pugatch, F. Alessio, and G. Corti, “The Radiation Monitoring System for the LHCb Inner Tracker”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU024, pp. 1115-1118.
[n] T. Mattison et al., “Status of the SLC Damping Ring Kicker Systems”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2955-2958.
[n] J. C. Chang, C. Y. Liu, J. R. Chen, and M. T. Ke, “Air Temperature Analysis and Control Improvement for the Large-Scale Experimental Hall”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP99908, pp. XX-XX.
[n] F. G. G. Garcia and W. Pellico, “FNAL Proton Source High Intensity Operations and Beam Loss Control”, in Proc. HB'12, Beijing, China, Sep. 2012, paper TUO3C02, pp. 320-323.
[n] L. Lu, T. He, C. C. Xing, and L. Yang, “Design and Low Power Test of a Prototype HOM LINAC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1001-1004. doi:10.18429/JACoW-IPAC2019-MOPTS063
[n] F. L. Krawczyk et al., “RF-loss Measurements in an Open Coaxial Resonator for Characterization of Copper Plating”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS021, pp. 2376-2378.
[n] T. Wilksen et al., “The Timing System for PETRA IV”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1335-1339. doi:10.18429/JACoW-ICALEPCS2023-THPDP018
[n] A. Kurtulus et al., “Detailed Electromagnetic Characterisation of HL-LHC Low Impedance Collimators”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4258-4261. doi:10.18429/JACoW-IPAC2021-THPAB235
[n] D. P. Gurd, “Managing the Development of Plant Subsystems for a Large International Project”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOCAULT02, pp. 27-30.
[n] J. P. Gourber, G. Guignard, A. Hofmann, J. P. Koutchouk, and H. Moshammer, “Compensation of Linear Betatron Coupling in LEP”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1429-1432.
[n] G. Sterbini, A. Blas, and S. S. Gilardoni, “Beam-based Performance of the CERN PS Transverse Feedback”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper MOPAB10, pp. 40-44.
[n] H. B. Knowles, “Shielding and Experimental Layout”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper B-06, pp. 110-123.
[n] J. L. Conradie, A. H. Botha, R. E. F. Fenemore, J. J. Kritzinger, and M. J. Van Niekerk, “A Flat-Top Acceleration System for the NAC Light Ion Injector Cyclotron”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-22, pp. 249-252.
[n] J. H. Yue, Q. Y. Deng, J. Hu, S. J. Wei, and Q. Ye, “Phase and Energy Measurement System for C-ADS Injector I”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 95-97. doi:10.18429/JACoW-IBIC2015-MOPB026
[n] K. Fujita, “Electromagnetic modeling of cryogenic vacuum chambers using a hybrid neural network-boundary integral equation approach”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPM073, unpublished.
[n] D. Rees et al., “Design, Operation, and Test Results of 350 MHz LEDA RF System”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4072, pp. 564-566.
[n] D. A. Kayran, A. N. Matveenko, O. A. Shevchenko, and N. A. Vinokurov, “TRANSVERSE EMITTANCE MEASUREMENTS IN HIGH-POWER FIR FEL ENERGY-RECOVERY LINAC”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WEHP14, pp. XX-XX.
[n] J. C. Chang, J. R. Chen, and C. Y. Liu, “Air Temperature Control Improvement for the Storage Ring Tunnel”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG025, pp. 1482-1484.
[n] B. V. Golovenskiy et al., “He⁺ Ion Source for the NICA Injection Complex”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 316-318. doi:10.18429/JACoW-RuPAC2021-TUPSB40
[n] G. Arnolds-Mayer et al., “A Superconducting 352 MHz Prototype Cavity for LEP”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3587-3590.
[n] J. Q. Li et al., “Development of an All Permanent Magnet ECR Ion Source for Low and Medium Charge State Ions Production”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 53-56. doi:10.18429/JACoW-HIAT2018-MOPB10
[n] J. L. Baelde et al., “The SISSI Facility at GANIL”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP050G, pp. 2403-2405.
[n] M. Blaskiewicz, J. M. Brennan, P. Cameron, and W. Fischer, “Longitudinal Impedance Measurement in RHIC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI033, pp. 1488-1490.
[n] J. Shi et al., “Development of an X-Band Metallic Power Extractor for the Argonne Wakefield Accelerator”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI031, pp. 2771-2773.
[n] S. Liu et al., “Investigation of Beam Halo Using In Vacuum Diamond Sensor at ATF2”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 791-794. doi:10.18429/JACoW-IPAC2015-MOPHA008
[n] E. Lamb et al., “Measurements of beam correlations induced via coupled resonance crossing in the CERN PSB”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1006-1009. doi:10.18429/JACoW-IPAC2024-TUPC07
[n] E. Pozdeyev, F. Marti, J. A. Rodriguez, and R. C. York, “Space Charge Effect in Isochronous Rings”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA30, pp. 157-164.
[n] K. R. Crandall, R. A. Jameson, D. Morris, and D. Swenson, “The dt Turn-On Procedure”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper F01, pp. 122-125.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Iwata et al., “Upgrade of Septum Magnets for Fast Extraction in J-Parc Main Ring”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2103-2105.
- X. Wu et al., “Installation, operations, and upgrade of a CS-30 cyclotron for the production of alpha emitters At-211 and Ac-225 at the Ionetix TAT facility”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB048, this conference.
- M. Zampetakis et al., “Refining the LHC Longitudinal Impedance Model”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper THBP37, pp. 559-562.
- M. Okamura, J. M. Fite, V. Lo Destro, D. Raparia, and J. Ritter, “Steering Magnet Design for a Limited Space”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP005, pp. 136-138.
- Y. G. Song, S. Y. Cho, and J. H. Kim, “EPICS DAQ System for Beam Position Monitor at the KOMAC Linac and Beamlines”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 447-449.
- J. P. Dai, “Design Study of Beijing XFEL Test Facility”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP025, pp. XX-XX.
- J. Friedl, “DELTA, The Dortmund Electron Test Storage Ring Accelerator”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 463-466.
- D. Bruhwiler, J. R. Cary, R. E. Giacone, P. Mardahl, and J. Verboncoeur, “Simulations of Plasma Wakefield Acceleration with XOOPIC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2B04, pp. 877-879.
- A. Dolinskii et al., “Simulation Results on Cooling Times and Equilibrium Parameters for Antiproton Beams at the HESR”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT057, pp. 1972-1974.
- G. Lawler et al., “High gradient operation of cryogenic C-band RF photogun at UCLA”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR32, pp. 527-530.
- Yu. A. Kubyshin, A. V. Aloev, N. I. Pakhomov, and V. I. Shvedunov, “A Novel Electron Gun for Off-axis Beam Injection”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP290, pp. 2029-2031.
- S. Keckert et al., “Mitigation of Parasitic Losses in the Quadrupole Resonator Enabling Direct Measurements of Low Residual Resistances of SRF Samples”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1196-1199.
- E. Wisniewski et al., “Fabrication study of corrugated structure for sub-THz by stacking disks”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR28, unpublished.
- J. P. Koutchouk, “Architecture of the LEP Application Software”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1199-1202.
- B. Bondarev, A. Durkin, Y. Ivanov, I. Shumakov, and S. Vinogradov, “Some Results of RFQ Modelling Based on New Possibilities of LIDOS.RFQ Codes”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE110, pp. 1616-1618.
- M. Zhang and Q. G. Zhou, “Study of Nonlinear Beam Dynamics Effects for DEPU at SSRF”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC075, pp. 1347-1349.
- D. Suddeth, “Microwave Ridged Waveguide Beam Pickups”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1886-1888.
- K. Kawa, T. Szumlak, C. Kokkinos, and F. Lackner, “High fidelity numerical modelling and condition monitoring applied to septum magnets at CERN”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR29, pp. 3556-3559.
- R. Ferdinand et al., “Final Results of the SPIRAL2 Injector Commissioning”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 848-851.
- R. L. Parise et al., “Development of Diffusion Bonded Joints of AA6061 Aluminum Alloy to AISI 316LN Stainless Steel for Sirius Planar Undulators”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3459-3462.
- D. Young, “Design of Drift Tube Linacs”, in Proc. 1962 Conf. on Linear Accelerators for High Energies (LINAC'62), Long Island, NY, USA, Aug. 1962, paper B-03, pp. 76-97.
- C. Liu et al., “Longitudinal Dynamics Simulation at Transition Crossing in RHIC with New Landau Cavity”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper MOPAB08, pp. 37-39.
- N. D. West, “The Nimrod Injector”, in Proc. 1962 Conf. on Linear Accelerators for High Energies (LINAC'62), Long Island, NY, USA, Aug. 1962, paper A-04, pp. 38-49.
- M. Shimada and Y. Kobayashi, “Design of a 2-Loop Compact ERL”, in Proc. 45th ICFA Advanced Beam Dynamics Workshop on Energy Recovery LINAC Workshop (ERL'09), Ithaca, NY, USA, Jun. 2009, paper WG208, pp. 50-52.
- I. Miura et al., “Proposal for a New Ring Accelerator”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper C-08, pp. 2074-2077.
- C. Liu, K. A. Drees, A. Marusic, M. G. Minty, and C. Montag, “Global Optics Correction for Low Energy RHIC Run”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper MOPAB05, pp. 34-36.
- S. Iwata et al., “Development of a pulse current monitoring device for the Eddy septum magnets in J-PARC main ring”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM104, pp. 2463-2466.
- A. I. Novokshonov et al., “Scintillator Nonproportionality Studies at PITZ”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 277-280.
- I. N. Meshkov, “NICA Project at JINR”, in Proc. 8th Workshop on Beam Cooling and Related Topics (COOL'11), Alushta, Ukraine, Sep. 2011, paper MOIO02, pp. 6-9.
- C. Dickey, G. V. Karpov, J. Madey, A. S. Medvedko, E. I. Shubin, and N. I. Zinevich, “NMR System for Magnetic Field Measurements at the MARK-3 Free Electron Laser”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP009G, pp. 2541-2542.
- A. Bonatto et al., “On the Development of a Low Peak-Power, High Repetition-Rate Laser Plasma Accelerator at IPEN”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1713-1716.
- S. Ohnuma, “Phase Oscillation and Transverse Focusing”, in Proc. 1962 Conf. on Linear Accelerators for High Energies (LINAC'62), Long Island, NY, USA, Aug. 1962, paper B-02, pp. 65-75.
- M. Vogel, X. Jiang, P. Murcek, J. Schaber, C. Wang, and R. Xiang, “Initial Study of GaN Thin Films for Photocathodes Prepared by Magnetron Sputtering on Copper Substrates”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2850-2852.
- C. Carli and M. Haj Tahar, “Systematic Effects Limiting the Sensitivity of Magic Energy" Proton EDM Rings"”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 602-605.
- C. Toth et al., “Colliding Pulse Injection Experiments in Non-Collinear Geometry for Controlled Laser Plasma Wakefield Acceleration of Electrons”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN112, pp. 2975-2977.
- L. Ristori et al., “Cold Tests of SSR1 Resonators Manufactured by IUAC for the Fermilab PIP-II Project”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB073, pp. 750-753.
- F. Gao, R. B. Deng, Z. Jiang, S. Xiang, L. Yin, and S. K. Sharma, “Hammerhead Support Design and Application at SSRF”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 60-62.
- J. Y. Tang et al., “SNS Vacuum Instrumentation and Control System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP062, pp. XX-XX.
- P. N. Potukuchi et al., “Fabrication of Superconducting Niobium Resonators at IUAC”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper C-06, pp. 266-270.
- I. Bazarov, M. Lakshmanan, and T. Miyajima, “Maximum achievable beam brightness from photoinjectors”, in Proc. 45th ICFA Advanced Beam Dynamics Workshop on Energy Recovery LINAC Workshop (ERL'09), Ithaca, NY, USA, Jun. 2009, paper PLT20, pp. XX-XX.
- A. Bonatto, R. Pakter, and F. B. Rizzato, “Nonlinear Propagation of Laser Pulses in Plasmas: a Comparison between Numerical and Analytical Solutions”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD033, pp. 4349-4351.
- A. V. Fedotov et al., “Beam Dynamics Limits for Low-Energy RHIC Operation”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGA10, pp. 75-77.
- L. Smith, “The New Bevatron Injector”, in Proc. 1962 Conf. on Linear Accelerators for High Energies (LINAC'62), Long Island, NY, USA, Aug. 1962, paper A-01, pp. 1-6.
- N. A. Vinokurov et al., “Status of the Novosibirsk Terahertz FEL”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUCOS01, pp. XX-XX.
- O. Okhrimenko, V. Iakovenko, V. M. Pugatch, F. Alessio, and G. Corti, “The Radiation Monitoring System for the LHCb Inner Tracker”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU024, pp. 1115-1118.
- T. Mattison et al., “Status of the SLC Damping Ring Kicker Systems”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2955-2958.
- J. C. Chang, C. Y. Liu, J. R. Chen, and M. T. Ke, “Air Temperature Analysis and Control Improvement for the Large-Scale Experimental Hall”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP99908, pp. XX-XX.
- F. G. G. Garcia and W. Pellico, “FNAL Proton Source High Intensity Operations and Beam Loss Control”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper TUO3C02, pp. 320-323.
- L. Lu, T. He, C. C. Xing, and L. Yang, “Design and Low Power Test of a Prototype HOM LINAC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1001-1004.
- F. L. Krawczyk et al., “RF-loss Measurements in an Open Coaxial Resonator for Characterization of Copper Plating”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS021, pp. 2376-2378.
- T. Wilksen et al., “The Timing System for PETRA IV”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP018, pp. 1335-1339.
- A. Kurtulus et al., “Detailed Electromagnetic Characterisation of HL-LHC Low Impedance Collimators”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4258-4261.
- D. P. Gurd, “Managing the Development of Plant Subsystems for a Large International Project”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOCAULT02, pp. 27-30.
- J. P. Gourber, G. Guignard, A. Hofmann, J. P. Koutchouk, and H. Moshammer, “Compensation of Linear Betatron Coupling in LEP”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1429-1432.
- G. Sterbini, A. Blas, and S. S. Gilardoni, “Beam-based Performance of the CERN PS Transverse Feedback”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper MOPAB10, pp. 40-44.
- H. B. Knowles, “Shielding and Experimental Layout”, in Proc. 1962 Conf. on Linear Accelerators for High Energies (LINAC'62), Long Island, NY, USA, Aug. 1962, paper B-06, pp. 110-123.
- J. L. Conradie, A. H. Botha, R. E. F. Fenemore, J. J. Kritzinger, and M. J. Van Niekerk, “A Flat-Top Acceleration System for the NAC Light Ion Injector Cyclotron”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-22, pp. 249-252.
- J. H. Yue, Q. Y. Deng, J. Hu, S. J. Wei, and Q. Ye, “Phase and Energy Measurement System for C-ADS Injector I”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 95-97.
- K. Fujita, “Electromagnetic modeling of cryogenic vacuum chambers using a hybrid neural network-boundary integral equation approach”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPM073, this conference.
- D. Rees et al., “Design, Operation, and Test Results of 350 MHz LEDA RF System”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4072, pp. 564-566.
- D. A. Kayran, A. N. Matveenko, O. A. Shevchenko, and N. A. Vinokurov, “TRANSVERSE EMITTANCE MEASUREMENTS IN HIGH-POWER FIR FEL ENERGY-RECOVERY LINAC”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper WEHP14, pp. XX-XX.
- J. C. Chang, J. R. Chen, and C. Y. Liu, “Air Temperature Control Improvement for the Storage Ring Tunnel”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG025, pp. 1482-1484.
- B. V. Golovenskiy et al., “He⁺ Ion Source for the NICA Injection Complex”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 316-318.
- G. Arnolds-Mayer et al., “A Superconducting 352 MHz Prototype Cavity for LEP”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3587-3590.
- J. Q. Li et al., “Development of an All Permanent Magnet ECR Ion Source for Low and Medium Charge State Ions Production”, in Proc. 14th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'18), Lanzhou, China, Oct. 2018, pp. 53-56.
- J. L. Baelde et al., “The SISSI Facility at GANIL”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP050G, pp. 2403-2405.
- M. Blaskiewicz, J. M. Brennan, P. Cameron, and W. Fischer, “Longitudinal Impedance Measurement in RHIC”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI033, pp. 1488-1490.
- J. Shi et al., “Development of an X-Band Metallic Power Extractor for the Argonne Wakefield Accelerator”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI031, pp. 2771-2773.
- S. Liu et al., “Investigation of Beam Halo Using In Vacuum Diamond Sensor at ATF2”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 791-794.
- E. Lamb et al., “Measurements of beam correlations induced via coupled resonance crossing in the CERN PSB”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC07, pp. 1006-1009.
- E. Pozdeyev, F. Marti, J. A. Rodriguez, and R. C. York, “Space Charge Effect in Isochronous Rings”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGA30, pp. 157-164.
- K. R. Crandall, R. A. Jameson, D. Morris, and D. Swenson, “The dt Turn-On Procedure”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper F01, pp. 122-125.
Back to search