JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	O. Shelbaya, R. A. Baartman, and O. K. Kester, “End-to-End RMS Envelope Model of the ISAC-I Linac”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4183-4186. doi:10.18429/JACoW-IPAC2021-THPAB204
[n]	P. Morales Sanchez et al., “Smartcell X-band normal conducting accelerator structure prototype fabrication”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 666-669. doi:10.18429/JACoW-LINAC2024-THPB016
[n]	V. Papadimitriou, R. Andrews, M. R. Campbell, A. Z. Chen, S. C. Childress, and C. D. Moore, “Status of the Design of the LBNE Neutrino Beamline”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD039, pp. 451-453. 
[n]	M. Pugliese et al., “Synchrobots: Experiments with Telepresence and Teleoperated Mobile Robots in a Synchrotron Radiation Facility”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOAAB04, pp. 1052-1057. 
[n]	J. Steimel et al., “The Six-Cavity Test - Demonstrated Acceleration of Beam with Multiple RF Cavities and a Single Klystron”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP062, pp. 3877-3879. 
[n]	R. Baartman, H. Schoenauer, and T. Suzuki, “Instabilities in the Proposed TRIUMF KAON Factory Synchrotrons”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2395-2398. 
[n]	M. Pugliese, F. Bill?¿, D. Favretto, N. Guidi, and M. Turcinovich, “Managing by Objectives a Research Infrastructure”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC083, pp. 292-295. 
[n]	D. Poole and T. Ring, “The Daresbury Personnel Safety System”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1931-1934. 
[n]	A. Huschauer, S. S. Gilardoni, and R. Wasef, “Influence of the Alignment of the Main Magnets on Resonances in the CERN Proton Synchrotron”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 392-394. doi:10.18429/JACoW-IPAC2015-MOPJE046
[n]	J. Repond, K. Iliakis, M. Schwarz, and E. N. Shaposhnikova, “Simulations of Longitudinal Beam Stabilisation in the CERN SPS With BLonD”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 179-185. doi:10.18429/JACoW-ICAP2018-TUPAF06
[n]	B. D. Muratori, “New Injector for the EMMA ns-FFAG Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD019, pp. 1449-1451. 
[n]	K. L. F. Bane, “Landau Damping in the SLAC Linac”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2389-2392. 
[n]	C. Benedetti, G. Franchetti, I. Hofmann, and G. Turchetti, “Transverse Mismatch Oscillations of a Bunched Beam in Presence of Space Charge and External Nonlinearities”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC086, pp. 3188-3190. 
[n]	D. J. Peake, M. J. Boland, R. T. Dowd, R. P. Rassool, and Y. E. Tan, “Preliminary Operational Experiences of a Bunch-by-bunch Transverse Feedback System at the Australian Synchrotron”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB027, pp. 2743-2745. 
[n]	J. M. Y. Ruber et al., “The New FREIA Laboratory for Accelerator Development”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3059-3061. doi:10.18429/JACoW-IPAC2014-THPRO077
[n]	Z. Kormány and I. Ander, “New Digital NMR System for an Old Analyzing Magnet”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC089, pp. 1215-1217. 
[n]	C. M. Gulliford, I. V. Bazarov, J. Dobbins, N. Malitsky, and R. M. Talman, “The NTMAT EPICS-DDS Virtual Accelerator for the Cornell ERL Injector”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB022, pp. 2734-2736. 
[n]	G. Le Meur, “A Mixed Finite Element Method for Particle Simulation in Lasertron”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1204-1207. 
[n]	D. Anicic et al., “Replacement of Magnet Power Supplies, Control and Fieldbus for the PSI Cyclotron Accelerators”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP041, pp. XX-XX. 
[n]	T. Tanabe, T. Masuoka, J. Ohnishi, M. Takano, and T. Katayama, “Preliminary Design of MUSES Control System Based on RT-CORBA and Java”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAT003, pp. XX-XX. 
[n]	T. Straumann et al., “New Controls Platform for SLAC High-Performance Systems”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 72-74. doi:10.18429/JACoW-PCAPAC2016-THHWPLCO02
[n]	F. J. Willeke, “Overcoming Performance Limitations due to Synchrobetatron Resonances in the HERA Electron Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT046, pp. 650-652. 
[n]	I. P. Parajuli, A. V. Gurevich, G. Ciovati, and J. R. Delayen, “Preliminary Results from Magnetic Field Scanning System for a Single-Cell Niobium Cavity”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 96. doi:10.18429/JACoW-SRF2021-SUPFDV015
[n]	M. L. Langlois, M. Cornelis, D. Einfeld, and F. Per?®z, “RF Measurements on Variations of the ALBA Dampy Cavity”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP008, pp. 821-823. 
[n]	R. Borghes et al., “A Common Software Framework for FEL Data Acquisition and Experiment Management at FERMI”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper FRCOAAB06, pp. 1481-1484. 
[n]	D. Bernard and A. E. Specka, “On Triple Focusing Dipole Magnets”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP093G, pp. 2453-2455. 
[n]	M. Olvegaard, T. J. C. Ekel?Âf, J. M. Y. Ruber, V. G. Ziemann, and J.-P. Koutchouk, “On the Suitability of a Solenoid Horn for the ESS Neutrino Superbeam”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3873-3875. doi:10.18429/JACoW-IPAC2015-THPF081
[n]	D. Huang et al., “RF Studies at Fermilab MuCool Test Area”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP032, pp. 888-890. 
[n]	R. Brinkmann, “Linear Collider Projects at DESY”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOZ01A, pp. 53-57. 
[n]	R. Borghes, V. Chenda, A. Gianoncelli, and G. Kourousias, “Evolving a LabVIEW End-Station Software to a TANGO-Based Solution at the TwinMic Elettra Beamline”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 948-952. doi:10.18429/JACoW-ICALEPCS2017-TUPHA208
[n]	R. Borghes et al., “Control and Data Acquisition Systems for the FERMI@Elettra Experimental Stations”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMU015, pp. 462-464. 
[n]	R. L. Lillestol, S. Doebert, M. Olvegaard, A. Rabiller, G. Sterbini, and E. Adli, “Experimental Verification of the CLIC Decelerator with theTest Beam Line in the CLIC Test Facility 3”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR031, pp. 1885-1887. 
[n]	H. S. Suh et al., “Design and Test of Dipole and Quadrupole Magnets for PAL-XFEL”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1271-1273. doi:10.18429/JACoW-IPAC2014-TUPRO098
[n]	H. Danared, “Design of the ESS Accelerator”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP071, pp. 3904-3906. 
[n]	Y. Senichev et al., “Quasi-frozen Spin Method for EDM Deuteron Search”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 213-215. doi:10.18429/JACoW-IPAC2015-MOPWA044
[n]	H. J. Kim et al., “Current Status of Superconducting Linac for the Rare Isotope Science Project”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 41-43. doi:10.18429/JACoW-LINAC2016-MOOP02
[n]	E. H. M. Wildner et al., “Status of the ESSnuSB Accumulator”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3942-3944. doi:10.18429/JACoW-IPAC2015-THPF100
[n]	B. Beaudoin, I. Haber, and R. A. Kishek, “Barrier Shock Compression with Longitudinal Space Charge”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 646-648. doi:10.18429/JACoW-IPAC2015-MOPMA044
[n]	H. Jin, I. S. Hong, and J.-H. Jang, “Recent Beam Dynamics Studies for the SCL Demo of RISP”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 121-123. doi:10.18429/JACoW-ECRIS2016-WEPP34
[n]	J. L. Bol et al., “High Intensity H Cyclotrons for Radioisotope Production”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper E-03, pp. 149-151. 
[n]	D. Douglas, “Ion Stability in Bunched Electron Beams”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2294-2297. 
[n]	K. Makino, M. Berz, and E. Valetov, “Computation of Nonlinear Fields and Orbit and Spin Transfer Maps of Electrostatic Elements using Differential Algebras”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 168-171. doi:10.18429/JACoW-ICAP2015-THDBC1
[n]	A. van Steenbergen and C. Gallardo, “Inverse Free Electron Laser Accelerator Development”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3PC002, pp. XX-XX. 
[n]	V. Leurent et al., “Ultra-short x-ray Radiation coming from a Laser Wakefield Accelerator”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP134, pp. 2809-2811. 
[n]	S. Brandenburg et al., “The RF System of the Superconducting Cyclotron AGOR”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F2-01, pp. 197-200. 
[n]	D. E. Kim et al., “First Results of the PAL-XFEL Prototype Undulator Measurements”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME026, pp. 3561-3563. 
[n]	V. Nuttens et al., “Cyclotron Vacuum Model and H- Gas Stripping Losses”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP075, pp. 200-202. 
[n]	M. Lonza et al., “Status Report of the FERMI@Elettra Control System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper TUDAUST02, pp. 589-592. 
[n]	M. A. Shapiro, J. R. Sirigiri, and R. J. Temkin, “Surface Waves on Interface of 3D Metal-wire Diamond Lattice for Accelerator Applications.”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS007, pp. 3008-3010. 
[n]	T. Tanabe, M. Kase, and T. Masuoka, “XML-Based Integration for VMEs, an Application Server and RDBMS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPDO008, pp. 2052-2054. 
[n]	R. L. Lillestol, S. Doebert, M. Olvegaard, and E. Adli, “Experimental Results from the Test Beam Line in the CLIC Test Facility 3”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA046, pp. 1814-1816. 
[n]	M. S. Zisman, “Status of the International Muon Ionization Cooling Experiment (MICE)”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN119, pp. 2996-2998. 
[n]	J.-L. Bol et al., “Operational Experience with the 500 /umA H- Isotope Production Cyclotron Cyclone 30”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1488-1491. 
[n]	B.-S. Park, B. H. Choi, and I. S. Hong, “Progress on RFQ Fabrication for RISP Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1308-1310. doi:10.18429/JACoW-IPAC2016-TUPMR030

For LaTeX

Use Complete Form

For BibTeX

References

Back to search