Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Leontein and E. Westlin, “Destructive Beam Profile Monitor Electronics using Gated Current Integrators”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP10E, pp. 1550-1552.
[n] V. Kamerdzhiev, G. F. Kuznetsov, G. W. Saewert, and V. D. Shiltsev, “Progress with Electron Beam System for the Tevatron Electron Lenses”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP058, pp. 3500-3502.
[n] E. D. Matias et al., “Phase II and III The Next Generation of CLS Beamline Control and Data Acquisition Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMU013, pp. 454-457.
[n] J. Jacob, L. Farvacque, G. Gautier, M. L. Langlois, and J. M. Mercier, “Commissioning of First 352.2 MHz - 150 kW Solid State Amplifiers at the ESRF and Status of R&D”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI004, pp. 2708-2710.
[n] E. Bagli, V. Guidi, and V. A. Maisheev, “ECHARM - a Software for Calculation of Physical Quantities of Interest in Coherent Interaction of Relativistic Particles with Crystals”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA070, pp. 1485-1487.
[n] C. Calvi, M. Bruegger, H. Joehri, and T. Schmidt, “SwissFEL U15 Magnet Assembly: First Experimental Results”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper THPD63, pp. 662-665.
[n] M. F. Fernandes et al., “A Cryogenic Current Comparator for the Low-Energy Antiproton Facilities at CERN”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 143-147. doi:10.18429/JACoW-IBIC2015-MOPB043
[n] V. Dudnikov, R. Hren, C. W. Schmidt, and J. Wendt, “High Current Density Negative Ion Source for Beam Line Transport Studies”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH006, pp. 2090-2092.
[n] P. Buaphad et al., “Magnetic Field Measurements for the IAC-RadiaBeam THz Project”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA062, pp. 3282-3284.
[n] M. S. Sanjari et al., “Conceptual Design of Elliptical Cavity Beam Position Monitors for Heavy Ion Storage Rings”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPD03, pp. 634-636.
[n] B. Piosczyk, “Preaccelerator Design and Component Development for the SNQ Linear Accelerator”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B04, pp. 43-45.
[n] F. Schmidt, E. Forest, and P. K. Skowronski, “MAD-X - An Accelerator Design Code”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper WESEPP06, pp. 232-232.
[n] H. Hanaki, H. Dewa, S. Suzuki, K. Yanagida, T. Asaka, and T. Ohshima, “Evaluation of Beam Energy Fluctuations Caused by Phase Noises”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP093, pp. 273-275.
[n] C. Yao et al., “Development of Fast Kickers for the APS MBA Upgrade”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3286-3288. doi:10.18429/JACoW-IPAC2015-WEPTY014
[n] M. Y. Park et al., “The Vacuum Systems for PEFP Linac”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB072, pp. 2884-2886.
[n] I. Saleh, Y. S. Dabain, A. Ismail, and M. Mansouri Sharifabad, “Clients Development of SESAME's Control System based on CSS”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO024, pp. 90-92.
[n] L. Ahle et al., “Current Status of the Recirculator Project at LLNL”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP124, pp. 3248-3250.
[n] Y. Suzuki et al., “Upgrade of a Low-Level Controller of Magnet Power Supply”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP571, pp. XX-XX.
[n] G. Wright et al., “Recent Changes to Beamline Software at the Canadian Light Source”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC100, pp. 813-815.
[n] M. Anerella et al., “Superconducting Magnets for use inside the HERA ep Interaction Regions”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUOA02A, pp. 308-310.
[n] D. Bulfone et al., “The FERMI FEL Project at Trieste”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPG11, pp. 186-188.
[n] G. L. Orlandi et al., “First Experimental Results of the Commissioning of the SwissFEL Wire-Scanners”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 388-392. doi:10.18429/JACoW-IBIC2017-WEPCC16
For LaTeX
Use Complete Form
For BibTeX
References
- S. Leontein and E. Westlin, “Destructive Beam Profile Monitor Electronics using Gated Current Integrators”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP10E, pp. 1550-1552.
- V. Kamerdzhiev, G. F. Kuznetsov, G. W. Saewert, and V. D. Shiltsev, “Progress with Electron Beam System for the Tevatron Electron Lenses”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP058, pp. 3500-3502.
- E. D. Matias et al., “Phase II and III The Next Generation of CLS Beamline Control and Data Acquisition Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMU013, pp. 454-457.
- J. Jacob, L. Farvacque, G. Gautier, M. L. Langlois, and J. M. Mercier, “Commissioning of First 352.2 MHz - 150 kW Solid State Amplifiers at the ESRF and Status of R&D”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI004, pp. 2708-2710.
- E. Bagli, V. Guidi, and V. A. Maisheev, “ECHARM - a Software for Calculation of Physical Quantities of Interest in Coherent Interaction of Relativistic Particles with Crystals”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA070, pp. 1485-1487.
- C. Calvi, M. Bruegger, H. Joehri, and T. Schmidt, “SwissFEL U15 Magnet Assembly: First Experimental Results”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper THPD63, pp. 662-665.
- M. F. Fernandes et al., “A Cryogenic Current Comparator for the Low-Energy Antiproton Facilities at CERN”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 143-147.
- V. Dudnikov, R. Hren, C. W. Schmidt, and J. Wendt, “High Current Density Negative Ion Source for Beam Line Transport Studies”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH006, pp. 2090-2092.
- P. Buaphad et al., “Magnetic Field Measurements for the IAC-RadiaBeam THz Project”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPEA062, pp. 3282-3284.
- M. S. Sanjari et al., “Conceptual Design of Elliptical Cavity Beam Position Monitors for Heavy Ion Storage Rings”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WEPD03, pp. 634-636.
- B. Piosczyk, “Preaccelerator Design and Component Development for the SNQ Linear Accelerator”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper B04, pp. 43-45.
- F. Schmidt, E. Forest, and P. K. Skowronski, “MAD-X - An Accelerator Design Code”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper WESEPP06, pp. 232-232.
- H. Hanaki, H. Dewa, S. Suzuki, K. Yanagida, T. Asaka, and T. Ohshima, “Evaluation of Beam Energy Fluctuations Caused by Phase Noises”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP093, pp. 273-275.
- C. Yao et al., “Development of Fast Kickers for the APS MBA Upgrade”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3286-3288.
- M. Y. Park et al., “The Vacuum Systems for PEFP Linac”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB072, pp. 2884-2886.
- I. Saleh, Y. S. Dabain, A. Ismail, and M. Mansouri Sharifabad, “Clients Development of SESAME's Control System based on CSS”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WPO024, pp. 90-92.
- L. Ahle et al., “Current Status of the Recirculator Project at LLNL”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP124, pp. 3248-3250.
- Y. Suzuki et al., “Upgrade of a Low-Level Controller of Magnet Power Supply”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP571, pp. XX-XX.
- G. Wright et al., “Recent Changes to Beamline Software at the Canadian Light Source”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC100, pp. 813-815.
- M. Anerella et al., “Superconducting Magnets for use inside the HERA ep Interaction Regions”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUOA02A, pp. 308-310.
- D. Bulfone et al., “The FERMI FEL Project at Trieste”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPG11, pp. 186-188.
- G. L. Orlandi et al., “First Experimental Results of the Commissioning of the SwissFEL Wire-Scanners”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 388-392.
Back to search