Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. P. Sargent and J. B. Flanz, “RF System for a 1 GeV Pulse Stretcher Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2614-2617.
[n] C. Sibley, A. Jones, D. Thompson, and E. Bjorklund, “Implementation and Integration of the SNS Timing and Machine Protection Systems”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP546, pp. XX-XX.
[n] R. N. Fernandes et al., “Management of IOCs at ESS”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1205. doi:10.18429/JACoW-ICALEPCS2019-WEPHA048
[n] J. J. Knopp, M. V. Fisher, Z. Liu, J. Maser, R. Reininger, and X. Shi, “Thermal Analysis of High Heat Load Mirrors for the in-Situ Nanoprobe Beamline of the APS Upgrade”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 238-240. doi:10.18429/JACoW-MEDSI2018-WEPH16
[n] V. Serriere, N. Guillotin, J. Jacob, F. Marhauser, and E. Weihreter, “Comprehensive Benchmark of Electromagnetic 3D Codes in Time and Frequency Domain”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH109, pp. 2167-2169.
[n] N. Samadi, L. D. Chapman, L. O. Dallin, and X. Shi, “Application of a Phase Space Beam Position and Size Monitor for Synchrotron Radiation”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4376-4379. doi:10.18429/JACoW-IPAC2019-FRXXPLS3
[n] S. R. Gysin, C. L. Schumann, and A. D. Petrov, “User Authentication for Role-Based Access Control”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPA12, pp. 111-113.
[n] J. B. Flanz et al., “Initial Equipment Commissioning of the Northeast Proton Therapy Center”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper C-03, pp. 319-322.
[n] R. E. Laxdal, G. H. Mackenzie, J. B. Pearson, and L. Root, “Beam Quality Investigations for H- Extraction at TRIUMF”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper IXA-12, pp. 415-418.
[n] S. M. Lidia, G. Bazouin, and P. A. Seidl, “Time-Dependent Phase-Space Measurements of the Longitudinally Compressing Beam in NDCX-I”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOOCS4, pp. 61-63.
[n] P. S. Sagalo, L. J. Dudek, A. Kisiel, G. W. Kowalski, A. I. Wawrzyniak, and P. P. Goryl, “The Novel Implementation of the Orbit Correction Algorithm for Solaris Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1861-1863. doi:10.18429/JACoW-IPAC2017-TUPIK071
[n] A. Smirnov and E. Syresin, “INCOHERENT VERTICAL ION LOSSES AT COOLING STACKING INJECTION”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper MOAPH26, pp. XX-XX.
[n] G. Favia et al., “Performance improvement studies for the CERN SPS MKDH system”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 474-477. doi:10.18429/JACoW-IPAC2025-MOPM066
[n] D. Shu et al., “Mechanical Design and Development of Compact Linear Nanopositioning Flexure Stages with Centimeter-Level Travel Range and Nanometer-Level Resolution”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 124-127. doi:10.18429/JACoW-MEDSI2016-TUBA04
[n] P.-A. Duperrex, “Compact Reconfigurable FPGA Based Beam Current Safety System for UCN”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD75, pp. 218-220.
[n] A. Potylitsyn and L. G. Sukhikh, “Transition Radiation from a Cylindrical Target and Transverse Beam Size Diagnostics”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD48, pp. 410-412.
[n] J. Rudolph, M. Abo-Bakr, T. Kamps, and J. Teichert, “Slice-Emittance Measurements at ELBE / SRF-Injector”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD50, pp. 416-418.
[n] N. Guillotin, J. Jacob, and V. Serriere, “Development of HOM Damped Copper Cavity for the ESRF”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH099, pp. 1244-1246.
[n] T. Giacomini, P. Forck, J. G. De Villiers, J. Dietrich, and D. A. Liakin, “Ionization Profile Monitors - IPM @ GSI”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD51, pp. 419-421.
[n] H. Anamkath et al., “Design and Factory Test of the e+/e- Frascati Linear Accelerator for DAPhi;NE”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-64, pp. 213-215.
[n] C. Bruni et al., “A Compact Ring for Thom X-Ray Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP040, pp. 1372-1374.
[n] H. Tarawneh and G. Vignola, “Insertion Devices for SESAME”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA058, pp. 193-195.
[n] M. A. Ibrahim et al., “FPGA Architectures for Distributed ML Systems for Real-Time Beam Loss De-Blending”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 160-163. doi:10.18429/JACoW-IBIC2023-TU3C02
[n] R. N. Fernandes, S. R. Gysin, S. Regnell, S. Sah, M. Vitorovic, and V. Vuppala, “Controls Configuration Database at ESS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 775-779. doi:10.18429/JACoW-ICALEPCS2017-TUPHA156
[n] B. Autin et al., “Preliminary Study of a Beauty Factory in the ISR Tunnel”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 392-395.
[n] T. G. Lee, S. Lee, and M. K. Park, “Application of MDSplus for the Management of the Pulsed-based Experimental Data in KSTAR Tokamak”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP012, pp. XX-XX.
[n] F. Senee, B. Pottin, G. Adroit, R. Gobin, O. Tuske, and A. Olivier, “Beam Species Fraction Measurement using Doppler Shift Method with FUJIKURA Fiberscope for IFMIF-EVEDA Injector”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD46, pp. 407-409.
[n] S. Kh. Jafar et al., “High Precision Magnet Powering for the SESAME Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3418-3421. doi:10.18429/JACoW-IPAC2017-WEPVA065
[n] D. Shu et al., “Mechanical Design of a New Precision Alignment Apparatus for Compact X-ray Compound Refractive Lens Manipulator”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 168-172. doi:10.18429/JACoW-MEDSI2018-WEOPMA04
[n] A. Kisiel et al., “Performance of the Beam Position Monitor System in Solaris Synchrotron”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 432-434. doi:10.18429/JACoW-IPAC2016-MOPMW017
[n] C. Gerth and C. Behrens, “Measurement of the Slice Energy Spread Induced by a Transverse Deflecting RF Structure at FLASH”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD31, pp. 371-373.
[n] H. Braun, K. Huebner, and W. Joho, “Decay Rates and Average Luminosity in a B-Factory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 141-144.
[n] M. Buttner, P. Charrue, J. Lauener, and M. Sobczak, “Diagnostic and Monitoring CERN Accelerator Controls Infrastructure : The DIAMON Project - First Deployment in Operation”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP019, pp. 128-130.
[n] E. Huttel, I. A. Abid, and S. Kh. Jafar, “The Pulsed Power Supplies of the SESAME Booster and Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3415-3417. doi:10.18429/JACoW-IPAC2017-WEPVA064
[n] K. D. Jacobs et al., “The Beam Profile Measuring System at the Bates Linac”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1523-1526.
[n] M. K. Craddock et al., “The TRIUMF Kaon Factory”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1707-1710.
[n] N. Samadi, L. D. Chapman, L. O. Dallin, and X. Shi, “Source Size and Emittance Measurements for Low-Emittance Light Sources”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper THAO03, unpublished.
[n] K. Mernick, M. Blaskiewicz, J. M. Brennan, B. R. Johnson, and F. Severino, “Microwave Link Phase Compensation for Longitudinal Stochastic Cooling in RHIC”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM085, pp. 389-393.
[n] O. Calvo, C. Sibley, and T. Russ, “High Stability Switching Mode Power Converters for Magnet Loads”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU466, pp. 493-495.
[n] P. Sagalo et al., “The State Machine for the Accelerator System Working in the National Synchrotron Radiation Centre Solaris”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 706-708. doi:10.18429/JACoW-ICALEPCS2017-TUPHA126
[n] J. A. Macdonald et al., “An RF Separator for Cloud Muons at TRIUMF”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2833-2836.
[n] K. J. Wakefield et al., “Sample and Detector Positioning Instruments for the Wide Angle XPCS End Station at 8-ID-E, a Feature Beamline for the APS Upgrade”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 333. doi:10.18429/JACoW-MEDSI2020-WEPC13
[n] J. Sestak, G. Bregliozzi, and P. Chiggiato, “Mechanical and Vacuum Stability Studies for the LHC Experiments Upgrade”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3667-3669. doi:10.18429/JACoW-IPAC2016-THPMY008
[n] D. S. Foudeh, E. Huttel, and N. Kh. Sawai, “The RF System of the SESAME Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4187-4189. doi:10.18429/JACoW-IPAC2017-THPIK041
[n] C. A. Preissner et al., “Earth, Wind, and Fire: The New Fast Scanning Velociprobe”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 112-115. doi:10.18429/JACoW-MEDSI2016-TUAA02
[n] J. B. Pearson, R. J. Balden, W. J. Kleeven, L. S. Milinkovic, and B. F. Milton, “Aspects of Phase Space Dynamics in Spiral Inflectors”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper G1-02, pp. 435-438.
[n] M. Ostoja-Gajewski, “IT Infrastructure Tips and Tricks for Control System and PLC”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1158-1161. doi:10.18429/JACoW-ICALEPCS2017-THBPA05
For LaTeX
Use Complete Form
For BibTeX
References
- C. P. Sargent and J. B. Flanz, “RF System for a 1 GeV Pulse Stretcher Ring”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2614-2617.
- C. Sibley, A. Jones, D. Thompson, and E. Bjorklund, “Implementation and Integration of the SNS Timing and Machine Protection Systems”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP546, pp. XX-XX.
- R. N. Fernandes et al., “Management of IOCs at ESS”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1205.
- J. J. Knopp, M. V. Fisher, Z. Liu, J. Maser, R. Reininger, and X. Shi, “Thermal Analysis of High Heat Load Mirrors for the in-Situ Nanoprobe Beamline of the APS Upgrade”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 238-240.
- V. Serriere, N. Guillotin, J. Jacob, F. Marhauser, and E. Weihreter, “Comprehensive Benchmark of Electromagnetic 3D Codes in Time and Frequency Domain”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH109, pp. 2167-2169.
- N. Samadi, L. D. Chapman, L. O. Dallin, and X. Shi, “Application of a Phase Space Beam Position and Size Monitor for Synchrotron Radiation”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4376-4379.
- S. R. Gysin, C. L. Schumann, and A. D. Petrov, “User Authentication for Role-Based Access Control”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPA12, pp. 111-113.
- J. B. Flanz et al., “Initial Equipment Commissioning of the Northeast Proton Therapy Center”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper C-03, pp. 319-322.
- R. E. Laxdal, G. H. Mackenzie, J. B. Pearson, and L. Root, “Beam Quality Investigations for H- Extraction at TRIUMF”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper IXA-12, pp. 415-418.
- S. M. Lidia, G. Bazouin, and P. A. Seidl, “Time-Dependent Phase-Space Measurements of the Longitudinally Compressing Beam in NDCX-I”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOOCS4, pp. 61-63.
- P. S. Sagalo, L. J. Dudek, A. Kisiel, G. W. Kowalski, A. I. Wawrzyniak, and P. P. Goryl, “The Novel Implementation of the Orbit Correction Algorithm for Solaris Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1861-1863.
- A. Smirnov and E. Syresin, “INCOHERENT VERTICAL ION LOSSES AT COOLING STACKING INJECTION”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper MOAPH26, pp. XX-XX.
- G. Favia et al., “Performance improvement studies for the CERN SPS MKDH system”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPM066, pp. 474-477.
- D. Shu et al., “Mechanical Design and Development of Compact Linear Nanopositioning Flexure Stages with Centimeter-Level Travel Range and Nanometer-Level Resolution”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 124-127.
- P.-A. Duperrex, “Compact Reconfigurable FPGA Based Beam Current Safety System for UCN”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD75, pp. 218-220.
- A. Potylitsyn and L. G. Sukhikh, “Transition Radiation from a Cylindrical Target and Transverse Beam Size Diagnostics”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD48, pp. 410-412.
- J. Rudolph, M. Abo-Bakr, T. Kamps, and J. Teichert, “Slice-Emittance Measurements at ELBE / SRF-Injector”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD50, pp. 416-418.
- N. Guillotin, J. Jacob, and V. Serriere, “Development of HOM Damped Copper Cavity for the ESRF”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH099, pp. 1244-1246.
- T. Giacomini, P. Forck, J. G. De Villiers, J. Dietrich, and D. A. Liakin, “Ionization Profile Monitors - IPM @ GSI”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD51, pp. 419-421.
- H. Anamkath et al., “Design and Factory Test of the e+/e- Frascati Linear Accelerator for DAPhi;NE”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-64, pp. 213-215.
- C. Bruni et al., “A Compact Ring for Thom X-Ray Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP040, pp. 1372-1374.
- H. Tarawneh and G. Vignola, “Insertion Devices for SESAME”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA058, pp. 193-195.
- M. A. Ibrahim et al., “FPGA Architectures for Distributed ML Systems for Real-Time Beam Loss De-Blending”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper TU3C02, pp. 160-163.
- R. N. Fernandes, S. R. Gysin, S. Regnell, S. Sah, M. Vitorovic, and V. Vuppala, “Controls Configuration Database at ESS”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 775-779.
- B. Autin et al., “Preliminary Study of a Beauty Factory in the ISR Tunnel”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 392-395.
- T. G. Lee, S. Lee, and M. K. Park, “Application of MDSplus for the Management of the Pulsed-based Experimental Data in KSTAR Tokamak”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP012, pp. XX-XX.
- F. Senee, B. Pottin, G. Adroit, R. Gobin, O. Tuske, and A. Olivier, “Beam Species Fraction Measurement using Doppler Shift Method with FUJIKURA Fiberscope for IFMIF-EVEDA Injector”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD46, pp. 407-409.
- S. Kh. Jafar et al., “High Precision Magnet Powering for the SESAME Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3418-3421.
- D. Shu et al., “Mechanical Design of a New Precision Alignment Apparatus for Compact X-ray Compound Refractive Lens Manipulator”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 168-172.
- A. Kisiel et al., “Performance of the Beam Position Monitor System in Solaris Synchrotron”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 432-434.
- C. Gerth and C. Behrens, “Measurement of the Slice Energy Spread Induced by a Transverse Deflecting RF Structure at FLASH”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD31, pp. 371-373.
- H. Braun, K. Huebner, and W. Joho, “Decay Rates and Average Luminosity in a B-Factory”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 141-144.
- M. Buttner, P. Charrue, J. Lauener, and M. Sobczak, “Diagnostic and Monitoring CERN Accelerator Controls Infrastructure : The DIAMON Project - First Deployment in Operation”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP019, pp. 128-130.
- E. Huttel, I. A. Abid, and S. Kh. Jafar, “The Pulsed Power Supplies of the SESAME Booster and Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3415-3417.
- K. D. Jacobs et al., “The Beam Profile Measuring System at the Bates Linac”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1523-1526.
- M. K. Craddock et al., “The TRIUMF Kaon Factory”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1707-1710.
- N. Samadi, L. D. Chapman, L. O. Dallin, and X. Shi, “Source Size and Emittance Measurements for Low-Emittance Light Sources”, presented at the 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, paper THAO03, unpublished.
- K. Mernick, M. Blaskiewicz, J. M. Brennan, B. R. Johnson, and F. Severino, “Microwave Link Phase Compensation for Longitudinal Stochastic Cooling in RHIC”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM085, pp. 389-393.
- O. Calvo, C. Sibley, and T. Russ, “High Stability Switching Mode Power Converters for Magnet Loads”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU466, pp. 493-495.
- P. Sagalo et al., “The State Machine for the Accelerator System Working in the National Synchrotron Radiation Centre Solaris”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 706-708.
- J. A. Macdonald et al., “An RF Separator for Cloud Muons at TRIUMF”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2833-2836.
- K. J. Wakefield et al., “Sample and Detector Positioning Instruments for the Wide Angle XPCS End Station at 8-ID-E, a Feature Beamline for the APS Upgrade”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 333.
- J. Sestak, G. Bregliozzi, and P. Chiggiato, “Mechanical and Vacuum Stability Studies for the LHC Experiments Upgrade”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3667-3669.
- D. S. Foudeh, E. Huttel, and N. Kh. Sawai, “The RF System of the SESAME Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4187-4189.
- C. A. Preissner et al., “Earth, Wind, and Fire: The New Fast Scanning Velociprobe”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 112-115.
- J. B. Pearson, R. J. Balden, W. J. Kleeven, L. S. Milinkovic, and B. F. Milton, “Aspects of Phase Space Dynamics in Spiral Inflectors”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper G1-02, pp. 435-438.
- M. Ostoja-Gajewski, “IT Infrastructure Tips and Tricks for Control System and PLC”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1158-1161.
Back to search