JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	C. Pai et al., “Mechanical Design of Fast Extraction Kicker and PFN for SNS Accumulator Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB049, pp. 2147-2149. 
[n]	H. S. Kim, Y.-S. Cho, and H.-J. Kwon, “Vertical Test of PEFP Prototype SRF Cavity”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC101, pp. 307-309. 
[n]	T. A. Miller et al., “Beam Profile Measurements in the RHIC Electron Lens using a Pinhole Detector and YAG Screen”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPF08, pp. 59-63. 
[n]	W. Zhang, L. Ahrens, J. Mi, B. Oerter, J. Sandberg, and D. Warburton, “Advancement of the RHIC Beam Abort Kicker System”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB007, pp. 1640-1642. 
[n]	J. Upadhyay, S. Popovic, L. Vuskovic, D. S. Im, H. L. Phillips, and A-M. Valente-Feliciano, “Plasma Processing of Large Surfaces with Application to SRF Cavity Modification”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP066, pp. 586-588. 
[n]	D. Manglunki et al., “Ions for LHC: Towards Completion of the Injector Chain”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC131, pp. 376-378. 
[n]	M. Meddahi et al., “LHC Injectors Upgrade Project: Towards New Territory Beam Parameters”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3385-3390. doi:10.18429/JACoW-IPAC2019-THXPLM1
[n]	L. C. Cao et al., “The Assembly and Adjustment of the Second Stripping Probe System for CYCIAE-100”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 199-201. doi:10.18429/JACoW-Cyclotrons2016-TUP14
[n]	K. Fang et al., “iSASE Study”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP029, pp. 442-445. 
[n]	C. Mitsuda et al., “Accelerator Implementing Development of Ceramics Chamber with Integrated Pulsed Magnet for Beam Test”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4164-4166. doi:10.18429/JACoW-IPAC2019-THPTS027
[n]	K. A. Dewhurst, H. L. Owen, E. Brunetti, D. A. Jaroszynski, S. M. Wiggins, and B. D. Muratori, “A Beamline Design to Transport Laser Wakefield Electrons to a Transverse Gradient Undulator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1577-1580. doi:10.18429/JACoW-IPAC2018-TUPML021
[n]	A. H. Lumpkin, R. J. Dejus, and N. Sereno, “COTR and SASE Generated by Compressed Electron Beams”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper THBAU05, pp. 501-506. 
[n]	L. Zhang, L. Farvacque, J. M. Filhol, and E. Plouviez, “E-Beam Stability Enhancement by Use of Damping Links for Magnet Girder Assemblies at the ESRF”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH073, pp. 2620-2622. 
[n]	D. Calzolari et al., “Radiation Load Studies for Superconducting Dipole Magnets in a 10 TeV Muon Collider”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1671-1674. doi:10.18429/JACoW-IPAC2022-WEPOST001
[n]	N. Hubert, L. Cassinari, J.-C. Denard, A. Nadji, L. S. N. Nadolski, and D. Pedeau, “Design of a Fast Orbit Feedback for SOLEIL”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT019, pp. XX-XX. 
[n]	T. Fukui et al., “Status of the Control System for the SACLA/SPring-8 Accelerator Complex”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1995-1999. doi:10.18429/JACoW-ICALEPCS2017-FRAPL03
[n]	T. D, B. Frak, J. Morris, and S. Nemesure, “Improving Data Retrieval Rates Using Remote Data Servers”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOMAU002, pp. 40-43. 
[n]	Y. Filatov et al., “Polarized Ion Beams in Figure-8 Rings of JLab's MEIC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 68-70. doi:10.18429/JACoW-IPAC2014-MOPRO004
[n]	V. V. Paramonov, A. K. Skasyrskaya, and B. L. Militsyn, “Evaluations of Parameters Stability of S-Band RF Gun Cavity Due to Effects of Pulsed RF Heating”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 100-102. doi:10.18429/JACoW-RUPAC2018-THCBMH02
[n]	X. Lin, H. B. Chen, Z. N. Liu, J. Shi, X. W. Wu, and H. Zha, “Analysis and Simulation of the After-Pulse" RF Breakdown"”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 196-199. doi:10.18429/JACoW-IPAC2019-MOPGW047
[n]	C. Deibele et al., “Calibration of the analog beam-signal hardware for the credited engineered beam power limit system at the Proton Power Upgrade Project at the Spallation Neutron Source”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 718-721. doi:10.18429/JACoW-LINAC2024-THPB041
[n]	G. Loisch et al., “A High Transformer Ratio Scheme for PITZ PWFA Experiments”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2551-2553. doi:10.18429/JACoW-IPAC2016-WEPMY006
[n]	O. C. Dermois, “The Design of Homogeneous Field Solenoids for the IUCF Cooler Section”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I1-02, pp. 288-291. 
[n]	E. Gschwendtner et al., “The CLIC Post-Collision Line”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE019, pp. 3386-3388. 
[n]	Z. Li, D. Chabot, S. Cogan, S. M. Lidia, and R. C. Webber, “FRIB Fast Machine Protection System: Chopper Monitor System Design”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 336-338. doi:10.18429/JACoW-LINAC2018-TUPO007
[n]	T. Okada et al., “Observation of Precise Distribution of Trapped Magnetic Flux Due to Quench by M&T Mapping System”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper TUOFDV02, pp.. 
[n]	H. C. Liu et al., “Low Power RF Tuning of the CSNS DTL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 913-915. doi:10.18429/JACoW-IPAC2016-MOPOY028
[n]	L. Hagge et al., “Organizing Civil Construction of the European XFEL”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP057, pp. 1211-1213. 
[n]	C. Boscolo Meneguolo et al., “Study of Beam-Gas Interactions at the LHC for the Physics Beyond Colliders Fixed-Target Study”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 673-676. doi:10.18429/JACoW-IPAC2019-MOPRB049
[n]	H. Huang, L. Ahrens, C. E. Harper, F. Meot, and V. Schoefer, “Beta Function Measurement for the AGS IPM”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 157-160. doi:10.18429/JACoW-IBIC2016-MOPG47
[n]	D. Prasuhn et al., “Status of the Cooler Synchrotron COSY-Juelich”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB069, pp. 3428-3430. 
[n]	Z. Y. Lin et al., “A High Voltage Feedforward Subsystem of Low Level RF System for the High Power RF System”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4898-4900. doi:10.18429/JACoW-IPAC2018-THPML100
[n]	L. Ristori et al., “Development of 325 MHz Single Spoke Resonators for HINS at Fermilab: Recent Results”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP060, pp. 963-965. 
[n]	J. G. Pett and A. Beuret, “Dynamic Behaviour of the LEP Power Converters”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1440-1443. 
[n]	S. Spampinati et al., “Developments in CLARA Accelerator Design and Simulations”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2930-2933. doi:10.18429/JACoW-IPAC2014-THPRO030
[n]	K. Hwang and J. Qiang, “Reliability Improvement on Wiggler Period Averaging Approximation”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4281-4283. doi:10.18429/JACoW-IPAC2018-THPMF086
[n]	J. A. Uythoven et al., “Upgrades to the LHC Injection and Beam Dumping Systems for the HL-LHC Project”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 141-144. doi:10.18429/JACoW-IPAC2014-MOPRO032
[n]	J. K. Spradlin, C. E. Reece, O. Trofimova, and A-M. Valente-Feliciano, “Automation of Particulate Characterization”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 477-481. doi:10.18429/JACoW-SRF2019-TUP030
[n]	K. Saito et al., “SRF Developments at MSU for FRIB”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP013, pp. 106-111. 
[n]	G. Machicoane et al., “ECR Ion Sources for the Facility for Rare Isotope Beams (FRIB) Project at Michigan State University”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOCOBK01, pp. 14-16. 
[n]	J. C. L. Brazier, A. Dinius, Q. King, and J. G. Pett, “The All-Digital Approach to LHC Power Converter Current Control”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THBT004, pp. XX-XX. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search