Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. Lebrun, “Collaborating with Industry: Lessons from the LHC Megaproject”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEIM02, pp. 1963-1963.
[n] N. G. Tolstun, A. S. Ivanov, V. P. Ovchinnikov and M. P. Svinin, “Further Development of Irradiation Field Forming Systems of Industrial Electron Accelerators”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH040, pp. 2005-2007.
[n] J. D. Fox, A. Gallo, T. Mastorides, D. Teytelman, D. Van Winkle, and Y.-B. Zhou, “Klystron Linearizer for Use with 1.2 MW 476 MHz Klystrons in PEP-II RF Systems”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT041, pp. 2660-2662.
[n] S. Khan et al., “SPEED: Worldwide first EEHG implementation at a storage ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1057-1060. doi:10.18429/JACoW-IPAC2023-MOPM032
[n] N. Kimura, “Hyperfine-Structure-Resolved Laser Spectroscopy of Highly Charged Ions in a Compact EBIT”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper FR2WH01, unpublished.
[n] J. Wei, S. Machida, S. Ochi, H. Okamoto, A. Sessler, and Y. Yuri, “Crystalline Beams at High Energies”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH028, pp. 2841-2843.
[n] T. Hoffmann et al., “A New DAQ Installation for the SIS18 Beam Position Monitoring System at GSI”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP047, pp. 759-761.
[n] R. L. Lillestol, S. Doebert, A. Latina, D. Schulte, E. Adli, and K. N. Sjobak, “Longitudinal Space Charge Effects in the CLIC Drive Beam”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA045, pp. 1811-1813.
[n] N. G. Tolstun, V. S. Kuznetsov, A. S. Ivanov, V. P. Ovchinnikov, and M. P. Svinjin, “The 3 MEV, 200 KW High Voltage Electron Accelerator for Industrial Application”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAE13, pp. 1222-1224.
[n] R. Bossart et al., “CLIC Test Facility Developments and Results”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPC10, pp. 719-721.
[n] A. Sessler and J. S. Wurtele, “Constraints on Laser-Driven Accelerators for a High Energy Linear Collider”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP083G, pp. 845-847.
[n] R. Carcagno et al., “Commissioning and early operating experience with the Fermilab horizontal test facility”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP14, pp. XX-XX.
[n] J.-Y. Raguin et al., “Progress in the Design of a New 150-MHz Flat Top Cavity for the PSI RING Cyclotron”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper WEPO018, pp. 241-244. doi:10.18429/JACoW-CYCLOTRONS2022-WEPO018
[n] J. Fernandez Cortes, E. Blanco Vinuela, and L. A. Gonzalez, “Industrial Stepping Motors Integration in the UNICOS-CPC Framework”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1720-1724. doi:10.18429/JACoW-ICALEPCS2017-THPHA144
[n] A. M. Marendziak, M. Rozwadowski, T. Sobol, M. J. Stankiewicz, and A. I. Wawrzyniak, “Three Years of Operational Experience With the Solaris Vacuum System”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3888-3890. doi:10.18429/JACoW-IPAC2018-THPAL107
[n] M. Boege, H. Grote, Q. Qin, and F. Schmidt, “Dynamic Aperture Studies for the LHC Version 4”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP033L, pp. 920-922.
For LaTeX
Use Complete Form
For BibTeX
References
- P. Lebrun, “Collaborating with Industry: Lessons from the LHC Megaproject”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEIM02, pp. 1963-1963.
- N. G. Tolstun, A. S. Ivanov, V. P. Ovchinnikov and M. P. Svinin, “Further Development of Irradiation Field Forming Systems of Industrial Electron Accelerators”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH040, pp. 2005-2007.
- J. D. Fox, A. Gallo, T. Mastorides, D. Teytelman, D. Van Winkle, and Y.-B. Zhou, “Klystron Linearizer for Use with 1.2 MW 476 MHz Klystrons in PEP-II RF Systems”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT041, pp. 2660-2662.
- S. Khan et al., “SPEED: Worldwide first EEHG implementation at a storage ring”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM032, pp. 1057-1060.
- N. Kimura, “Hyperfine-Structure-Resolved Laser Spectroscopy of Highly Charged Ions in a Compact EBIT”, presented at the 14th International Symposium of EBIS/T (EBIST2022), Whistler, BC, Canada, Jun. 2022, paper FR2WH01, unpublished.
- J. Wei, S. Machida, S. Ochi, H. Okamoto, A. Sessler, and Y. Yuri, “Crystalline Beams at High Energies”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH028, pp. 2841-2843.
- T. Hoffmann et al., “A New DAQ Installation for the SIS18 Beam Position Monitoring System at GSI”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP047, pp. 759-761.
- R. L. Lillestol, S. Doebert, A. Latina, D. Schulte, E. Adli, and K. N. Sjobak, “Longitudinal Space Charge Effects in the CLIC Drive Beam”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWA045, pp. 1811-1813.
- N. G. Tolstun, V. S. Kuznetsov, A. S. Ivanov, V. P. Ovchinnikov, and M. P. Svinjin, “The 3 MEV, 200 KW High Voltage Electron Accelerator for Industrial Application”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAE13, pp. 1222-1224.
- R. Bossart et al., “CLIC Test Facility Developments and Results”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPC10, pp. 719-721.
- A. Sessler and J. S. Wurtele, “Constraints on Laser-Driven Accelerators for a High Energy Linear Collider”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP083G, pp. 845-847.
- R. Carcagno et al., “Commissioning and early operating experience with the Fermilab horizontal test facility”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP14, pp. XX-XX.
- J.-Y. Raguin et al., “Progress in the Design of a New 150-MHz Flat Top Cavity for the PSI RING Cyclotron”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper WEPO018, pp. 241-244.
- J. Fernandez Cortes, E. Blanco Vinuela, and L. A. Gonzalez, “Industrial Stepping Motors Integration in the UNICOS-CPC Framework”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1720-1724.
- A. M. Marendziak, M. Rozwadowski, T. Sobol, M. J. Stankiewicz, and A. I. Wawrzyniak, “Three Years of Operational Experience With the Solaris Vacuum System”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3888-3890.
- M. Boege, H. Grote, Q. Qin, and F. Schmidt, “Dynamic Aperture Studies for the LHC Version 4”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP033L, pp. 920-922.
Back to search